Veritas Access 安装指南

包括 NIC

1. 如果排除了某些 NIC，但是未保存配置，则可以重新包括某个 NIC。安装程序要求您选择希望在群集中配置的 NIC 选项时，如果要包括某个 NIC，请输入 2。

   Veritas Access 7.4.2 Configure Program                                          
   10.200.114.45 10.200.114.46                                                 
   
   NIC bonding/NIC exclusion configuration
   
   NIC bonding supports only public NICs. Make sure the NICs you choose 
   are connected to public network.
   
   NIC  PCI ID       bond status    If excluded 
   =============================================
   eth2 0000:02:03.0 (physical NIC) 	Y           
   eth3 0000:02:04.0 (physical NIC) 	Y           
   eth4 0000:02:05.0 (physical NIC) 	N           
   eth5 0000:02:06.0 (physical NIC) 	N           
   eth6 0000:02:07.0 (physical NIC) 	N           
   eth7 0000:02:08.0 (physical NIC) 	N           
   
   					1)  Exclude NICs
        2)  Include NICs
        3)  Create a new bond
        4)  Add NICs to a bond
        5)  Remove bonds
        6)  Remove NICs from the bond list
        7)  Create VLAN device
        8)  Delete VLAN device
        9)  Save and continue
   
   Select the NIC option to be configured in this cluster: [1-9,q] 2

2. 安装程序会提示您选择要包括的 NIC。输入您的选择。

   Choose NICs for inclusion
   
        1)  eth2 0000:02:03.0 (excluded NIC)
        2)  eth3 0000:02:04.0 (excluded NIC)
   		   3)  Include NICs per node 
        b)  Back to previous menu
   
   Choose NICs: [1-6,b,q] 1

3. 安装程序将返回到之前的菜单。您可以选择另一个要包括的 NIC。输入 2 可包括另一个 NIC。您也可以保存您的配置，然后继续安装 Veritas Access。

   如果要保存配置，请输入 9。

   Veritas Access 7.4.2 Configure Program                                          
   10.200.114.45 10.200.114.46                                                 
   
   NIC bonding/NIC exclusion configuration
   
   NIC bonding supports only public NICs. Make sure the NICs you choose 
   are connected to public network.
   
   NIC  PCI ID       bond status    If excluded 
   =============================================
   eth2 0000:02:03.0 (physical NIC) N           
   eth3 0000:02:04.0 (physical NIC) Y           
   eth4 0000:02:05.0 (physical NIC) N           
   eth5 0000:02:06.0 (physical NIC) N           
   eth6 0000:02:07.0 (physical NIC) N           
   eth7 0000:02:08.0 (physical NIC) N           
   
   					1)  Exclude NICs
        2)  Include NICs
        3)  Create a new bond
        4)  Add NICs to a bond
        5)  Remove bonds
        6)  Remove NICs from the bond list
        7)  Create VLAN device
        8)  Delete VLAN device
        9)  Save and continue
   
   Select the NIC option to be configured in this cluster: [1-9,q]

4. 如果要按节点包括 NIC，请在步骤 2 中输入 3。