Please enter search query.
Search <product_name> all support & community content...
Article: 100016450
Last Published: 2020-01-23
Ratings: 0 1
Product(s): Backup Exec
Description
Many models of robotic libraries have a lock down function. This feature prevents users from opening the door on the library during backup operations or if they are not authorized to access the tape media. To manually unlock or lock the door to the robotic library via the Backup Exec User Interface, right-click on the first entry that shows under
Robotic Libraries on the
Devices tab, and select either
Unlock or
Lock (Figure 1).
For example: To lock the robotic library's front panel
For example: To lock the robotic library's front panel
- Backup Exec 2012 and above version, click on the Storage Tab in the ribbon of the Backup Exec console.
- Select the robotic library.
- For Backup Exec 2012 and above version right click on the Robotic Library and select Lock.
- Complete the appropriate options as follows:
Job name Type a name for the job or accept the default name.
Select the priority for the job.
5 Do one of the following:
To run the job now, click Run Now.
To set scheduling options, on the Properties pane, under Frequency, click Schedule.
Figure 1:
Select the priority for the job.
5 Do one of the following:
To run the job now, click Run Now.
To set scheduling options, on the Properties pane, under Frequency, click Schedule.
Figure 1:
![](https://veritastech.custhelp.com/euf/assets/images/100016450/image-1579756343598.png)
An alternate method that can be used is to right click the Robotic Library and select Lock or Unlock.
Note: Forcing a robotic library's door open without unlocking it properly via the Backup Exec Interface can cause the device to go offline in Backup Exec. The library and server must be powered up in the proper sequence after the device goes offline for Backup Exec to communicate properly with the hardware.