Veritas Access 3340 Appliance Product Description

Last Published:
Product(s): Appliances (8.2, 8.1, 8.0, 7.4.3, 7.4.2, 7.3.2)
Platform: Veritas 3340
  1. About the Access 3340 Appliance
    1.  
      About the Veritas Access 3340 Appliance
    2.  
      Features and components of the appliance
    3.  
      Locating the appliance serial number
    4. About 3340 compute node disk drive configurations
      1.  
        About the compute node disk drive LEDs
    5.  
      About the compute node front panel USB port
    6. About the compute node control panel
      1.  
        About the System Status LED states
      2.  
        About the Power button LED states
    7.  
      About the compute node rear panel
    8. Standard 3340 Appliance PCIe-based I/O configuration
      1. Total 3340 Appliance on-board and PCIe-based I/O ports
        1.  
          Intel RSP3GD016J SAS3 RAID PCIe host bus adapter
      2.  
        3340 Appliance network interface card port assignments
      3.  
        SAS3 host bus adapter connector locations and labels
  2. About the Veritas 5U84 Storage Shelves
    1. About Veritas Access 3340 Appliance storage shelves
      1.  
        Available appliance storage options
      2. About the Veritas 5U84 Storage Shelf disk drive drawers
        1.  
          Disk drive slot numbering
        2.  
        3.  
          Disk Drive Drawer printed circuit board (PCB) assemblies
        4.  
          Drawer Sideplane Status panels
        5.  
          Drawer Sideplane hot swap LED indicators
      3.  
        5U84 Primary Storage Shelf and the 5U84 Expansion Storage Shelf control panel
    2. About the 5U84 Primary Storage Shelf and 5U84 Expansion Storage Shelf rear components
      1.  
        Veritas 5U84 Primary Storage Shelf RAID controllers
      2. Veritas 5U84 Expansion Storage Shelf Expansion I/O modules
        1.  
          Expansion I/O module Status LED location and conditions
        2.  
          Expansion I/O module SAS Activity LED location and conditions
      3.  
        Veritas 5U84 Storage Shelf cooling modules
      4.  
        5U84 Storage Shelf Power Supply Units
  3. Access 3340 Appliance and 5U84 Storage Shelf cables
    1.  
      Power cables
    2.  
      Network cable
    3.  
      Multi-mode fiber optic cable
    4.  
      SAS-3 cable
    5.  
      Twinaxial copper cables
  4. Appendix A. Technical specifications, Environmental/Protocol standards, and Compliance standards
    1.  
      3340 Appliance compute node technical specifications
    2.  
      Veritas 5U84 Storage Shelf technical specifications
    3.  
      Environmental specifications
    4.  
      Protocol standards
    5. Regulatory, compliance, and certification information
      1.  
        Product regulatory compliance
      2.  
        Product safety compliance
      3.  
        Product EMC Compliance - Class A Compliance
      4.  
        Product ecology compliance
      5.  
        Certifications / Registrations / Declarations
      6. Electromagnetic compatibility notices
        1.  
          FCC Verification Statement (USA)
        2.  
          ICES-003 (Canada)
        3.  
          CE Declaration of Conformity (Europe)
        4.  
          VCCI (Japan)
        5.  
          BSMI (Taiwan)
  5.  
    Index

About 3340 compute node disk drive configurations

The Veritas Access 3340 Appliance compute node contains three 2 TB SAS hard disk drives. Each disk drive is accessible from the compute node's front panel. An embedded RAID controller on the compute node's mainboard configures two of the three disk drives into a mirrored RAID1 volume.

The RAID1 volume is labeled Volume 0. The disk drives that are located in slot 0 and slot 1 are configured as the RAID1, VOLUME0 device. These disk drives contain the appliance operating system, the operating system swap file, and the Veritas Access application. You can hot-swap one of these disk drives at a time if a drive becomes problematic. However, you cannot operate the appliance if both disk drives are removed.

The appliance uses the disk drive that is located in slot 2 as a hot-spare disk. If a disk drive in RAID Volume0 experiences a hardware error, the appliance automatically initiates a RAID rebuild operation. During the rebuild operation, the appliance dynamically accesses the hot-spare disk from slot 2 and uses it to rebuild the RAID volume.

Figure: Veritas Access 3340 Appliance compute node front panel disk slot assignments

Veritas Access 3340 Appliance compute node front panel disk slot assignments

Table: Veritas Access 3340 Appliance compute node front panel disk drive configurations

Slot

RAID level

Disk drive size (TB)

Disk drive role

0, 1

RAID1

2 TB

Appliance operating system boot volume / operating system swap file / Veritas Access application

2

2 TB

Hot spare

3 - 11

No disk drives installed