Veritas NetBackup™ Flex Scale Installation and Configuration Guide

Last Published:
Product(s): Appliances (1.3.1)
Platform: NetBackup Flex Scale OS
  1. Preparing for NetBackup Flex Scale deployment
    1.  
      Deployment overview
    2.  
      NetBackup Flex Scale configuration requirements
    3.  
      Firewall and network ports requirements
    4.  
      Considerations for using IPv6 addresses
  2. Configuring NetBackup Flex Scale
    1.  
      Assigning a public IP address to network adapter eth1 of a node
    2.  
      NetBackup Flex Scale configuration methods
    3.  
      Configuring NetBackup Flex Scale using the setup wizard
    4. Configuring NetBackup Flex Scale using a configuration file
      1.  
        YML configuration file
  3. Troubleshooting NetBackup Flex Scale deployment
    1.  
      NetBackup Flex Scale logs
    2.  
      Connection timeout errors during patch installs, upgrades, and rollback operations
    3.  
      Initial configuration wizard displays a driver node not selected error
    4.  
      Initial configuration wizard displays a license error after successfully configuring the cluster
  4. NetBackup Flex Scale upgrades and patch management
    1. About NetBackup Flex Scale upgrades and EEB
      1.  
        Pre-upgrade steps
    2.  
      Performing a patch upgrade using GUI
    3.  
      Installing EEBs using GUI
    4.  
      Performing a patch upgrade using REST APIs
    5.  
      Installing EEBs using REST APIs
  5. Removing NetBackup Flex Scale
    1. About disk erasure
      1.  
        Configuring data erasure
      2.  
        Viewing the data erasure status
      3.  
        Aborting data erasure
    2.  
      About NetBackup Flex Scale node factory reset
    3.  
      Performing a factory reset on a node
  6. Appendix A. Installing NetBackup Flex Scale
    1.  
      About NetBackup Flex Scale software installation
    2.  
      Enabling remote IPMI connections
    3.  
      Setting up the RAID configuration on the nodes
    4.  
      Configuring the BIOS settings on the nodes
    5.  
      Downloading the product installer ISO
    6.  
      Mounting the ISO file on the nodes
    7.  
      Installing NetBackup Flex Scale using the ISO

About NetBackup Flex Scale upgrades and EEB

NetBackup Flex Scale supports software version upgrades. The upgrade operation is supported using both the GUI and RESTful APIs.

Open a web browser and type the following URL in the address bar to sign in to the NetBackup Flex Scale infrastructure management console:

https://ManagementServerIPorFQDN:14161

If you are using IPv6 addresses, use the following URL syntax:

https://[ManagementServerIP]:14161

Here, ManagementServerIPorFQDN is the public IP address or FQDN that you specified for the NetBackup Flex Scale management server and API gateway during the cluster configuration.

You can find the RESTful APIs at https://ManagementServerIPorFQDN:14161/swagger/infra/v1.0/

If you are using IPv6 addresses, use the following URL syntax:

https://[ManagementServerIP]:14161/swagger/infra/v1.0/

The GUI supports the following operations:

  • Check SORT for the availability of major upgrades, and patches. The Check online for upgrade option shows the details of packages available on SORT.

  • You can download available major upgrades, and patches from SORT.

  • The GUI displays the download package progress.

  • You can upload major upgrades, patches, and EEBs from your local systems.

  • The GUI displays the details of downloaded and installed major upgrades, patches, and EEBs.

  • You can delete major upgrades, and patches which are downloaded in the system through the GUI.

  • You can delete downloaded EEBs which are not installed on the system.

  • You can install major upgrades, patches, and EEBs only when all nodes are healthy.

  • You can rollback EEBs from the system only when all the nodes are healthy.

  • Depending on the EEB, you might need to ensure that there are no jobs running before you install or roll back the EEB.

  • The GUI disables other operations when installation or rollback operations are in progress.

  • The GUI displays the progress for operations like installation of major upgrades, patches, EEBs, and rollback of EEBs.

Note:

If disaster recovery is configured, make sure that you install the EEBs and patches on the secondary site.

You cannot perform the following operations if an upgrade is in progress:

  • Add another node to the cluster.

  • Replace an existing node in the cluster.

  • Add or modify existing data networks.

  • Create, edit, or delete a network bond.