Veritas NetBackup™ Appliance Commands Reference Guide

Last Published:
Product(s): Appliances (3.1.1)
  1. Overview
    1.  
      About the NetBackup Appliance Shell Menu
    2. Logging on to the NetBackup Appliance Shell Menu
      1.  
        Command limitations on appliances that are not configured
    3.  
      Using the NetBackup Appliance Shell Menu
    4. About the NetBackup Appliance Shell Menu command views
      1.  
        About the commands under the Appliance view
      2.  
        About the commands under the Manage view
      3.  
        About the commands under the Monitor view
      4.  
        About the commands under the Network view
      5.  
        About the commands under the Reports view
      6.  
        About the commands under the Settings view
      7.  
        About the commands under the Support view
  2. Appendix A. Main > Appliance commands
    1.  
      Appliance > Master
    2.  
      Appliance > Media
    3.  
      Appliance > Management
    4.  
      Appliance > Remove
    5.  
      Appliance > ShowDedupPassword
    6.  
      Appliance > ShowIdentity
    7.  
      Appliance > Status
  3. Appendix B. Main > Manage > FibreChannel commands
    1.  
      Manage > FibreChannel > Clean
    2.  
      Manage > FibreChannel > Configure
    3.  
      Manage > FibreChannel > Reset
    4.  
      Manage > FibreChannel > Scan
    5.  
      Manage > FibreChannel > Show
    6.  
      Manage > FibreChannel > Statistics
  4. Appendix C. Main > Manage > HighAvailability commands
    1.  
      Manage > HighAvailability > AddNode
    2.  
      Manage > HighAvailability > GetAssetTag
    3.  
      Manage > HighAvailability > RemoveNode
    4.  
      Manage > HighAvailability > Setup
    5.  
      Manage > HighAvailability > Status
    6.  
      Manage > HighAvailability > Switchover
  5. Appendix D. Main > Manage > Libraries commands
    1.  
      Manage > Libraries > Configure
    2.  
      Manage > Libraries > Deny
    3.  
      Manage > Libraries > Down
    4.  
      Manage > Libraries > Inventory
    5.  
      Manage > Libraries > List
    6.  
      Manage > Libraries > Requests
    7.  
      Manage > Libraries > Reset
    8.  
      Manage > Libraries > Resubmit
    9.  
      Manage > Libraries > Up
  6. Appendix E. Main > Manage > Libraries > Advanced > ACS commands
    1.  
      Manage > Libraries > Advanced > ACS > ACS_CSI_HOSTPORT
    2.  
      Manage > Libraries > Advanced > ACS > ACS_SEL_SOCKET
    3.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_HOSTNAME
    4.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_INET_PORT
    5.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_SOCKET
    6.  
      Manage > Libraries > Advanced > ACS > ACS_TCP_RPCSERVICE
    7.  
      Manage > Libraries > Advanced > ACS > ACS_UDP_RPCSERVICE
    8.  
      Manage > Libraries > Advanced > ACS > API_BARCODE_RULES
    9.  
      Manage > Libraries > Advanced > ACS > TestACS
    10.  
      Manage > Libraries > Advanced > ACS > ViewVMconf
  7. Appendix F. Main > Manage > License commands
    1.  
      Manage > License > Add
    2.  
      Manage > License > List
    3.  
      Manage > License > ListInfo
    4.  
      Manage > License > Remove
  8. Appendix G. Main > Manage > MountPoints commands
    1.  
      Manage > MountPoints > List
    2.  
      Manage > MountPoints > Mount
    3.  
      Manage > MountPoints > Unmount
  9. Appendix H. Main > Manage > NetBackup CLI commands
    1.  
      Manage > NetBackupCLI > Create
    2.  
      Manage > NetBackupCLI > Delete
    3.  
      Manage > NetBackupCLI > List
    4.  
      Manage > NetBackupCLI > PasswordExpiry
  10. Appendix I. Main > Manage > OpenStorage commands
    1.  
      Manage > OpenStorage > Install
    2.  
      Manage > OpenStorage > List
    3.  
      Manage > OpenStorage > Readme
    4.  
      Manage > OpenStorage > Share
    5.  
      Manage > OpenStorage > Uninstall
  11. Appendix J. Main > Manage > Software commands
    1.  
      Manage > Software > Cancel
    2.  
      Manage > Software > Delete
    3.  
      Manage > Software > Download
    4.  
      Manage > Software > DownloadProgress
    5.  
      Manage > Software > Firmware
    6.  
      Manage > Software > Install
    7.  
      Manage > Software > List
    8.  
      Manage > Software > LiveUpdateClients
    9.  
      Manage > Software > Readme
    10.  
      Manage > Software > Rollback
    11.  
      Manage > Software > Share
    12.  
      Manage > Software > UpgradeStatus
  12. Appendix K. Main > Manage > Storage commands
    1.  
      Manage > Storage > Add
    2.  
      Manage > Storage > Create
    3.  
      Manage > Storage > Delete
    4.  
      Manage > Storage > Edit
    5.  
      Manage > Storage > Monitor
    6.  
      Manage > Storage > Move
    7.  
      Manage > Storage > Remove
    8.  
      Manage > Storage > Resize
    9.  
      Manage > Storage > Scan
    10.  
      Manage > Storage > Show
    11.  
      Manage > Storage > Erase
  13. Appendix L. Main > Manage > Tapes commands
    1.  
      Manage > Tapes > Cleaning
    2.  
      Manage > Tapes > Delete
    3.  
      Manage > Tapes > Eject
    4.  
      Manage > Tapes > Freeze
    5.  
      Manage > Tapes > Inventory
    6.  
      Manage > Tapes > List
    7.  
      Manage > Tapes > ListNetBackupMedia
    8.  
      Manage > Tapes > Suspend
    9.  
      Manage > Tapes > Unfreeze
    10.  
      Manage > Tapes > Unsuspend
  14. Appendix M. Main > Manage > Certificates commands
    1.  
      Manage > Certificates > Generate
    2.  
      Manage > Certificates > Delete
  15. Appendix N. Main > Monitor commands
    1.  
      Monitor > Beacon
    2.  
      Monitor > MemoryStatus
    3.  
      Monitor > NetBackup
    4.  
      Monitor > NetworkStatus
    5.  
      Monitor > SDCS
    6.  
      Monitor > Top
    7.  
      Monitor > Uptime
    8.  
      Monitor > Who
    9.  
      Monitor > Hardware
  16. Appendix O. Main > Network commands
    1.  
      Network > Configure
    2.  
      Network > Date
    3.  
      Network > DNS
    4.  
      Network > Gateway
    5.  
      Network > Hostname
    6.  
      Network > Hosts
    7.  
      Network > IPv4
    8.  
      Network > IPv6
    9.  
      Network > LinkAggregation
    10.  
      Network > NetStat
    11.  
      Network > NTPServer
    12.  
      Network > Ping
    13.  
      Network > SetProperty
    14.  
      Network > Show
    15.  
      Network > TimeZone
    16.  
      Network > TraceRoute
    17.  
      Network > Unconfigure
    18.  
      Network > VLAN
    19.  
      Network > WANOptimization
  17. Appendix P. Main > Network > Security (IPsec) commands
    1.  
      Network > IPsec > Configure
    2.  
      Network > IPsec > Delete
    3.  
      Network > IPsec > Export
    4.  
      Network > IPsec > Import
    5.  
      Network > IPsec > Provision
    6.  
      Network > IPsec > Refresh
    7.  
      Network > IPsec > Show
    8.  
      Network > IPsec > Unconfigure
  18. Appendix Q. Main > Reports commands
    1.  
      Reports > Deduplication
    2.  
      Reports > Process
  19. Appendix R. Main > Settings commands
    1.  
      Settings > Cloud
    2.  
      Settings > Deduplication
    3.  
      Settings > FibreTransport
    4.  
      Settings > iSCSI > Initiator
    5.  
      Settings > iSCSI > Interface
    6.  
      Settings > iSCSI > Target
    7.  
      Settings > LogForwarding
    8.  
      Settings > LifeCycle
    9.  
      Settings > LiveUpdateServer
    10.  
      Settings > NetBackup
    11.  
      Settings > Password
    12.  
      Settings > Share
    13.  
      Settings > SNMP polling
    14.  
      Settings > Sysctl
    15.  
      Settings > SystemLocale
  20. Appendix S. Main > Settings > Alerts commands
    1.  
      Settings > Alerts > CallHome
    2.  
      Settings > Alerts > Email
    3.  
      Settings > Alerts > Hardware
    4.  
      Settings > Alerts > SNMP
  21. Appendix T. Main > Settings > Notifications view commands
    1.  
      Settings > Notifications > LoginBanner
  22. Appendix U. Main > Settings > Security commands
    1.  
      Settings > Security > Authorization
    2.  
      Settings > Security > Authentication > ActiveDirectory
    3.  
      Settings > Security > Authentication > Kerberos
    4.  
      Settings > Security > Authentication > LDAP
    5.  
      Settings > Security > Authentication > LocalUser
    6.  
      Main > Settings > Security > STIG
    7.  
      Main > Settings > Security > FIPS
  23. Appendix V. Main > Support commands
    1.  
      Support > Checkpoint
    2.  
      Support > Cleanup > RemoveShelfEntries
    3.  
      Support > Cleanup > ResetDIMMErrors
    4.  
      Support > Collect
    5.  
      Support > DataCollect
    6.  
      Support > Disk
    7.  
      Support > Errors
    8.  
      Support > FactoryReset
    9.  
      Support > FibreTransport
    10.  
      Support > InfraServices
    11.  
      Support > iostat
    12.  
      Support > IPMI
    13.  
      Support > KillRemoteCall
    14.  
      Support > Logs
    15.  
      Support > Maintenance
    16.  
      Support > Messages
    17.  
      Support > NBDNA
    18.  
      Support > nbperfchk
    19.  
      Support > NBSU
    20.  
      Support > Processes
    21.  
      Support > RAID
    22.  
      Support > Reboot
    23.  
      Support > RecoverStorage
    24.  
      Support > Service
    25.  
      Support > ServiceAllowed
    26.  
      Support > Show
    27.  
      Support > Shutdown
    28.  
      Support > Storage ClearReservations
    29.  
      Support > Storage Reset
    30.  
      Support > Storage SanityCheck
    31.  
      Support > Test

Name

Main > Network > Configure — Configure the appliance to a network.

SYNOPSIS

Configure IPAddress Netmask GatewayIPAddress [InterfaceNames] [BondingMode]

DESCRIPTION

You can use the Configure command to configure the IP address of a single interface on the network that you want to connect your appliance to. When you use this command, you need to define the IP address, the netmask address, and the gateway address.

If multiple interfaces with separate IP addresses are used, use the Network > IPv4 or the Network > IPv6 commands to configure each network interface individually.

Use the Network > Gateway command to add the routing information for default route or to add route for VLAN interfaces.

Caution:

If you have an operational NetBackup 53xx high availability configuration, do not make the following changes on the public network interface card (NIC):

Change the IPv4 address.

Create any bond with the IPv6 address.

OPTIONS

Configure IPAddress Netmask GatewayIPAddress [InterfaceNames] [BondingMode]

Configure the IP address and default gateway for the appliance. The command configures the IP address and sets the default gateway.

Where IPAddress is the IPv4 or IPv6 address, Netmask is the netmask, GatewayIPAddress is the default gateway IP address, and [InterfaceNames] is the name of the device.

This device can be a physical interface, a bond, or a VLAN interface.

Remember that you should not use both an IPv4 and an IPv6 address in the same command. For example, you cannot use Configure 9ffe::9 255.255.255.0 1.1.1.1.. You should use Configure 9ffe::46 64 9ffe::49 eth1 to configure an interface using IPv6 address.

In the [InterfaceNames] field the following applies:

  • If you enter a single interface name, then the IP address is configured on that device.

  • If you enter a comma-separated list of interface names, then a bond is created and the IP address is configured on the bonded device. You must ensure that the interfaces that comprise the list are of same type, either FIBRE or COPPER). In addition, the interfaces must support the same speed and at least one of the interfaces in the list is cabled.

  • If you do not enter an interface name, the best possible interface or interfaces are selected based on the port type (FIBRE or COPPER), speed, and the link status.

You define the bonding mode in the BondingMode field. You can enter one of the following modes:

  • balance-rr

  • active-backup

  • balance-xor

  • broadcast

  • 802.3ad

  • balance-tlb

  • balance-alb (This bonding mode is the default value.)

EXAMPLES

The following example shows how to configure your appliance network settings:

Network > Configure 10.180.2.3 255.255.255.0 eth1

The following examples show how to configure your appliance using the Auto selection, specifying a specific interface, or multiple interfacing and creating a bond.

  • Specify explicit interfaces such as eth2 and eth3 to create a bond. For this example, you provide the IPAddress, NetMask, Gateway IPAddress, interface names, and the bonding mode, in that order.

    Network > Configure 10.180.2.3 255.255.255.0 eth2,eth3 balance-alb

    You can also create a bond and configure it using IPv6 addresses:

    Network > Configure 9ffe::207  64 9ffe::49 eth,eth3