Veritas NetBackup™ Appliance Commands Reference Guide
- Overview
- Appendix A. Main > Appliance commands
- Appendix B. Main > Manage > FibreChannel commands
- Appendix C. Main > Manage > HighAvailability commands
- Appendix D. Main > Manage > Libraries commands
- Appendix E. Main > Manage > Libraries > Advanced > ACS commands
- Manage > Libraries > Advanced > ACS > ACS_CSI_HOSTPORT
- Manage > Libraries > Advanced > ACS > ACS_SEL_SOCKET
- Manage > Libraries > Advanced > ACS > ACS_SSI_HOSTNAME
- Manage > Libraries > Advanced > ACS > ACS_SSI_INET_PORT
- Manage > Libraries > Advanced > ACS > ACS_SSI_SOCKET
- Manage > Libraries > Advanced > ACS > ACS_TCP_RPCSERVICE
- Manage > Libraries > Advanced > ACS > ACS_UDP_RPCSERVICE
- Manage > Libraries > Advanced > ACS > API_BARCODE_RULES
- Manage > Libraries > Advanced > ACS > TestACS
- Manage > Libraries > Advanced > ACS > ViewVMconf
- Appendix F. Main > Manage > License commands
- Appendix G. Main > Manage > MountPoints commands
- Appendix H. Main > Manage > NetBackup CLI commands
- Appendix I. Main > Manage > OpenStorage commands
- Appendix J. Main > Manage > Software commands
- Manage > Software > Cancel
- Manage > Software > Delete
- Manage > Software > Download
- Manage > Software > DownloadProgress
- Manage > Software > Firmware
- Manage > Software > Install
- Manage > Software > List
- Manage > Software > Readme
- Manage > Software > Rollback
- Manage > Software > Share
- Manage > Software > UpgradeStatus
- Manage > Software > VxUpdate
- Appendix K. Main > Manage > Storage commands
- Appendix L. Main > Manage > Tapes commands
- Appendix M. Main > Manage > Certificates commands
- Appendix N. Main > Monitor commands
- Appendix O. Main > Network commands
- Network > Configure
- Network > Date
- Network > DNS
- Network > Gateway
- Network > Hostname
- Network > Hosts
- Network > IPv4
- Network > IPv6
- Network > LinkAggregation
- Network > NetStat
- Network > NTPServer
- Network > Ping
- Network > SetProperty
- Network > Show
- Network > TimeZone
- Network > TraceRoute
- Network > Unconfigure
- Network > VLAN
- Network > WANOptimization
- Appendix P. Main > Network > Security commands (IPsec)
- Appendix Q. Main > Reports commands
- Appendix R. Main > Settings commands
- Settings > Deduplication
- Settings > FibreTransport
- Settings > iSCSI > Initiator
- Settings > iSCSI > Interface
- Settings > iSCSI > Target
- Settings > LogForwarding
- Settings > LifeCycle
- Settings > NetBackup
- Settings > NetBackup DNAT
- Settings > NetBackup NATServers
- Settings > Password
- Settings > Share
- Settings > SNMP polling
- Settings > Sysctl
- Settings > SystemLocale
- Appendix S. Main > Settings > Alerts commands
- Appendix T. Main > Settings > Notifications view commands
- Appendix U. Main > Settings > Security commands
- Settings > Security > Authorization
- Settings > Security > Authentication > ActiveDirectory
- Settings > Security > Authentication > Kerberos
- Settings > Security > Authentication > LDAP
- Settings > Security > Authentication > LocalUser
- Main > Settings > Security > Certificate
- Main > Settings > Security > FIPS
- Main > Settings > Security > Ports
- Main > Settings > Security > STIG
- Appendix V. Main > Support commands
- Support > Checkpoint
- Support > Cleanup > RemoveShelfEntries
- Support > Cleanup > ResetDIMMErrors
- Support > Collect
- Support > DataCollect
- Support > Disk
- Support > Errors
- Support > FactoryReset
- Support > FibreTransport
- Support > InfraServices
- Support > iostat
- Support > IPMI
- Support > KillRemoteCall
- Support > LogBrowser
- Support > Logs
- Support > Maintenance
- Support > Messages
- Support > NBDNA
- Support > nbperfchk
- Support > NBSU
- Support > Processes
- Support > RAID
- Support > Reboot
- Support > RecoverStorage
- Support > Service
- Support > ServiceAllowed
- Support > ShelfOrdering
- Support > Show
- Support > Shutdown
- Support > Storage ClearReservations
- Support > Storage Reset
- Support > Storage SanityCheck
- Support > Test
Name
Main > Manage > FibreChannel > Show — Use to view the FC HBA card port and device configuration.
SYNOPSIS
Show [Ports]
DESCRIPTION
Use this command to view the FC HBA card port and device configuration for this appliance.
OPTIONS
- Show Ports
Use this command to view only the port information of the FC HBA cards for this appliance.
Port Information includes the following:
Bus ID
Slot location (1-6)
Port location (1-2)
Port World Wide Name (WWN)
Status
Online
Offline
Fabric
Disconnected
Linkdown
Loop
Ptp
Physical State (Initiator or Target)
Configuration Type
Initiator - marked as a standard initiator port.
Target (FTMS) - marked as a target port for SAN Client FTMS.
Target (MSDP) - marked as a target port for duplicating data from another NetBackup 52xx or 53xx appliance.
Speed
Remote Ports
The Physical State column shows the actual state of the HBA ports.
The Configuration Type column shows the port mode that a user has specified. The default port type configuration is shown if the user has not changed it.
When you enable an FC feature, the port that has been marked as a target port for that feature then enters the target mode. Before the enabling operation, the port stays in the standard initiator mode, and it shows an actual physical state of Initiator.
By comparing the Configuration Type and the Physical State columns, you can know if a related FC feature is enabled.
- Show
Use this command to view the following FC HBA card port and device configuration for this appliance:
Configuration state of the Fibre Transport media server (FTMS)
Configuration state of the HBA cards and the card names
Whether the drivers are loaded
Port information
Device information
Remote appliances over FC
Note:
If you cannot see any target appliance that you have configured for this appliance, scan for remote appliances over FC by using the Main> Manage> FibreChannel> Scan and then run the Show command again.
EXAMPLES
The following is an example of information when you run the Main > Manage> FibreChannel > Show command.