Veritas NetBackup™ Status Codes Reference Guide
- NetBackup status codes
- NetBackup status codes
- NetBackup KMS status codes
- NetBackup status codes
- Media Manager status codes
- Media Manager status codes
- Media Manager status codes
- Device configuration status codes
- Device configuration status codes
- Device configuration status codes
- Device management status codes
- Device management status codes
- Device management status codes
- Robotic status codes
- Robotic status codes
- Robotic status codes
- Robotic error codes
- Robotic error codes
- Robotic error codes
- Security services status codes
- Security services status codes
- Security services status codes
NetBackup status code: 2106
Explanation: This error can occur when a job uses a disk storage unit whose disk group resides on a storage server that NetBackup has marked down. This error can also occur when a cloud storage backup fails.
Recommended Action: Verify that all media servers that are configured for the storage server can communicate with the storage server. The bpstsinfo command queries the storage server periodically, so you can use the bpstsinfo log set to verbosity level 5 on the media server.
If the error is related to a cloud storage backup failure, you should verify the following information:
The
cacert.pem
file is on both the NetBackup master and the media server in the following locations:UNIX/Linux:
/usr/open/var/webtruststore
Windows:
install_path/var/webtruststore
The
cacert.pem
file is the same on the NetBackup master and the media server.The machine certificate is in the following location:
UNIX/Linux:
/usr/openv/var/vxss/credentials
Windows:
install_path/var/vxss/credentials
The NetBackup CloudStore Service is active.
The NetBackup Administration Console on the tab.
option on the NetBackup master server is selected if the media server is version 8.0 or earlier. The option is available in the
Click here to view technical notes and other information in the Veritas Knowledge Base about this status code.