Veritas NetBackup™ 53xx Appliance Initial Configuration Guide

Last Published:
Product(s): Appliances (3.0)
Platform: 5330,5340

NetBackup appliance initial configuration checklist

This checklist is intended to help you plan for the initial configuration of your appliance.

Use this checklist together with the initial configuration procedures in the NetBackup Appliance Initial Configuration Guide. That document also contains a copy of this checklist.

For a new appliance, use the following tables to record the initial configuration settings for this appliance. If this appliance is ever factory reset or re-imaged, the appliance must be configured again. The recorded settings in the checklist can save valuable time and help get the appliance back on line quickly.

When using the hard copy or printed version of this checklist, make sure to place the completed checklist in a secure location. You can also obtain a PDF version of the checklist to download and save to a location of your choice. To access the latest version of this checklist, see the following link:

https://www.veritas.com/support/en_US/article.000100480

IPMI port configuration

IPMI port configuration is separate from the initial configuration. To use this port for remote access to the appliance, you must first configure it for connectivity to your network. Use the following table to record the required parameter settings.

Table: IPMI port configuration

Parameter

Setting

IP Address

Netmask

Gateway IP Address

Appliance initial configuration

The following tables identify the fields that appear on the initial configuration pages in the NetBackup Appliance Web Console. Use these tables to record your settings.

Table: Network Configuration - Create Bond

Field

Setting

Network Interface

Bond Mode

IP Address

Subnet Mask

Table: Network Configuration - Tag VLAN

Field

Setting

Select Interface

Description (for Select Interface field above)

VLAN Id

IP Address (IPv4 or IPv6)

Subnet Mask

Table: Network Configuration - Add Static Route

Field

Setting

Destination IP

Destination Subnet Mask

Gateway

Network Interface

Table: Host Configuration

Field

Setting

Host Name

Domain Name System (DNS)

  • Domain Name Suffix

  • DNS IP Address

  • Search Domain(s)

DNS:

  • ________________________________

  • ________________________________

  • ________________________________

Host Name Resolution (no DNS)

  • IP address

  • Fully qualified host name

  • Short host name

No DNS:

  • ________________________________

  • ________________________________

  • ________________________________

Table: Password change

Field

Setting

Old admin password

New admin password

Confirm new admin password

Table: Date and time configuration

Field

Setting

Time zone

NTP Server IP

Date and Time

Table: Alerting Configuration

Field

Setting

Notification Interval (in 15-minute intervals)

Enable SNMP Alert

SNMP server (required only if you check Enable SNMP Alert)

SNMP port

SNMP community

SMTP server

Software administrator email address

Hardware administrator email address

Sender email address

SMTP account

Password

Table: Call Home Configuration

Field

Setting

Enable Call Home

Enable proxy server

Enable proxy tunneling

Proxy server (required only if you check Enable proxy server)

Proxy port (required only if you check Enable proxy server)

Proxy user name

Proxy password

Table: AdvancedDisk storage configuration

Field

Setting

Storage Unit name

Disk Pool Name

Size

Table: Deduplication (MSDP) Disk Configuration

Field

Setting

Storage Unit name

Disk Pool Name

Size