Veritas NetBackup™ Upgrade Guide

Last Published:
Product(s): NetBackup (8.2)
  1. Introduction
    1.  
      About the NetBackup 8.2 Upgrade Guide
    2.  
      Available NetBackup upgrade methods
    3. About changes in NetBackup 8.2
      1.  
        Upgrades from NetBackup 7.6.0.4 and earlier are not supported
      2.  
        External certificate authority certificates supported by NetBackup 8.2
    4.  
      About Veritas Smart Meter
    5.  
      Best practices for Veritas Smart Meter
  2. Planning for an upgrade
    1. General upgrade planning information
      1.  
        About planning a NetBackup 8.2 upgrade
      2.  
        How to plan for an upgrade to NetBackup 8.2
      3.  
        Known catalog backup limitation
      4.  
        About security certificates for NetBackup hosts
      5.  
        About automatic file changes from an upgrade
    2. About upgrade tools
      1.  
        About Veritas Services and Operations Readiness Tools
      2.  
        Recommended SORT procedures for upgrades
      3.  
        Recommended SORT procedures for new installations
      4.  
        About the NetBackup preinstall checker
    3. Upgrade operational notes and limitations
      1.  
        Creating the user account to support the NetBackup web server
      2.  
        About NetBackup 8.2 support for Fibre Transport Media Server with RHEL 7.5
      3.  
        MSDP changes in NetBackup 8.1
      4.  
        Potential required changes for NetApp clusters
      5.  
        Errors when Bare Metal Restore information is replicated using Auto Image Replication
      6.  
        Upgrade issue with pre-8.1 clients and 8.1 or later media servers
  3. Master server upgrade
    1.  
      About master server upgrades
    2.  
      Preinstall procedure for upgrading to NetBackup 8.2
    3.  
      Performing local, remote, or clustered server upgrades on Windows systems
    4.  
      Performing silent upgrades on Windows systems
    5.  
      Upgrading UNIX and Linux server software to NetBackup 8.2
    6.  
      Post-install procedure for upgrading to NetBackup 8.2
    7.  
      About NetBackup startup and shutdown scripts
    8.  
      Completing your system update after an upgrade
  4. Media server upgrade
    1.  
      Upgrading NetBackup media servers to NetBackup 8.2
    2.  
      Silently upgrading NetBackup media server software on UNIX and Linux
  5. MSDP upgrade for NetBackup
    1.  
      MSDP upgrade considerations for NetBackup 8.1
    2.  
      About MSDP rolling data conversion
    3.  
      About MSDP fingerprinting algorithm changes
  6. Client upgrade
    1.  
      About client upgrades
    2.  
      Upgrading UNIX and Linux clients with the NetBackup upgrade script
    3.  
      Upgrade of the UNIX and Linux client binaries with native installers
  7. NetBackup Deployment Management with VxUpdate
    1.  
      About VxUpdate
    2.  
      Commands used in VxUpdate
    3.  
      Repository management
    4.  
      Deployment policy management
    5.  
      Manually initiating upgrades from the master server using VxUpdate
    6.  
      Manually initiating upgrades from the media server or client using VxUpdate
    7.  
      Deployment job status
  8. Appendix A. Reference
    1.  
      NetBackup master server web server user and group creation
    2.  
      Generate a certificate on the inactive nodes of a clustered master server
    3.  
      About the NetBackup Java Runtime Environment
    4.  
      About the NetBackup web user interface
    5.  
      About the NetBackup answer file
    6.  
      About RBAC bootstrapping
    7.  
      Update cloud configuration file on the master server immediately after install or upgrade to NetBackup 8.2
    8.  
      About NetBackup software availability
    9.  
      Additional post-upgrade steps for NetApp clusters
    10.  
      Using NetApp disk arrays with Replication Director
    11.  
      About compatibility between NetBackup versions
    12.  
      Installation and upgrade requirements for UNIX and Linux
    13.  
      Installation and upgrade requirements for Windows and Windows clusters
    14.  
      Requirements for Windows cluster installations and upgrades
    15.  
      Removing a clustered media server by migrating all data to a new media server
    16.  
      Disabling the connection between your NetBackup OpsCenter server and your NetBackup Master Server
    17.  
      Post upgrade procedures for Amazon cloud storage servers
    18.  
      Upgrading clients after servers are upgraded

Generate a certificate on the inactive nodes of a clustered master server

After finishing a clustered master server installation or upgrade, you must generate a certificate on all inactive nodes. This procedure is required for backups and restores of the inactive node of the cluster to succeed.

Generating the certificate on the inactive nodes in a clustered master server

Note:

Unless otherwise indicated, all commands are issued from the inactive node

  1. (Conditional) Add all inactive nodes to the cluster.

    If all the nodes of the cluster are not currently part of the cluster, start by adding them to the cluster. Please consult with your operating system cluster instructions for assistance with this process.

  2. Run the nbcertcmd command to store the Certificate Authority certificate on the inactive node.

    UNIX: /usr/openv/netbackup/bin/nbcertcmd -getCACertificate

    Windows: install_path\NetBackup\bin\nbcertcmd -getCACertificate

  3. Run the nbcertcmd command to generate the host certificate on the inactive node.

    nbcertcmd -getCertificate

  4. (Conditional) If the nbcertcmd -getCertificate command fails with an error message indicating that a token is needed, you need a token from the Certificate Authority. Use the steps that are shown to get and correctly use the token.

    • On the active node, use the bpnbat command as shown to authorize the necessary changes. When you are prompted for the authentication broker, enter the virtual server name, not the local node name. 


      bpnbat -login -loginType WEB

    • On the active node, use the nbcertcmd command to create a token.

      nbcertcmd -createToken -name token_name

      The token name is not important to this procedure. When the command runs, it displays the token string value. Note this value as it is necessary for the next command.

    • On the inactive node, use the authorization token with the nbcertcmd command to store the host certificate.

      nbcertcmd -getCertificate -token

      This command prompts you for the token string value. Enter the token string from the nbcertcmd -createToken command.

Additional information about certificates is available. Please see the section on deploying certificates on master server nodes in the Veritas NetBackup Security and Encryption Guide.