Please enter search query.
Search <book_title>...
Cluster Server 7.3.1 Bundled Agents Reference Guide - Linux
Last Published:
2019-06-14
Product(s):
InfoScale & Storage Foundation (7.3.1)
Platform: Linux
- Introducing Bundled agents
- Storage agents
- DiskGroup agent
- DiskGroupSnap agent
- Notes for DiskGroupSnap agent
- Sample configurations for DiskGroupSnap agent
- Volume agent
- VolumeSet agent
- Sample configurations for VolumeSet agent
- LVMLogicalVolume agent
- LVMVolumeGroup agent
- Sample configurations for LVMVolumeGroup agent
- Mount agent
- Sample configurations for Mount agent
- VMwareDisks agent
- SFCache agent
- AWS EBSVol agent
- AzureDisk agent
- Network agents
- About the network agents
- IP agent
- NIC agent
- Notes for the NIC agent
- Sample configurations for NIC agent
- IPMultiNIC agent
- MultiNICA agent
- IP Conservation Mode (ICM) for MultiNICA agent
- Performance Mode (PM) for MultiNICA agent
- Sample configurations for MultiNICA agent
- DNS agent
- Agent notes for DNS agent
- About using the VCS DNS agent on UNIX with a secure Windows DNS server
- Sample configurations for DNS agent
- AWSIP agent
- AWSRoute53 agent
- AzureIP agent
- AzureDNSZone agent
- File share agents
- NFS agent
- NFSRestart agent
- Share agent
- About the Samba agents
- SambaServer agent
- SambaShare agent
- NetBios agent
- Service and application agents
- Apache HTTP server agent
- Application agent
- Notes for Application agent
- Sample configurations for Application agent
- CoordPoint agent
- KVMGuest agent
- Notes for KVMGuest agent
- Sample configurations for KVMGuest environment
- Sample configurations for RHEV environment
- Process agent
- Usage notes for Process agent
- Sample configurations for Process agent
- ProcessOnOnly agent
- AzureAuth agent
- Infrastructure and support agents
- Testing agents
- Replication agents
- RVG agent
- RVGPrimary agent
- RVGSnapshot
- RVGShared agent
- RVGLogowner agent
- RVGSharedPri agent
- VFRJob agent
- Dependencies for VFRJob agent
- Notes for the VFRJob agent
Configuring the Fiber Channel adapter
Most Fiber Channel (FC) drivers have a configurable parameter called "failover". This configurable parameter is in the FC driver's configuration file. This parameter is the number of seconds that the driver waits before it transitions a disk target from OFFLINE to FAILED. After the state becomes FAILED, the driver flushes all pending fiber channel commands back to the application with an error code. Veritas recommends that you use a non-zero value that is smaller than any of the MonitorTimeout values of the Disk Group resources. Use this value to avoid excessive waits for monitor timeouts.
For more information, refer to the following guides:
Dynamic Multi-Pathing Administrator's Guide
Fiber Channel Adapter's Configuration Guide