Veritas NetBackup™ Device Configuration Guide

Last Published:
Product(s): NetBackup (8.3.0.1, 8.3, 8.2, 8.1.2)
  1. Introducing device configuration
    1.  
      Using this guide
    2. General device configuration sequence
      1.  
        Configuration cautions
    3.  
      About the NetBackup compatibility lists
  2. Section I. Operating systems
    1. Linux
      1.  
        Before you begin on Linux
      2. About the required Linux SCSI drivers
        1.  
          About the st driver debug mode
      3.  
        Verifying the Linux drivers
      4. About configuring robot and drive control for Linux
        1.  
          About the Linux robotic control device files
        2.  
          About the Linux tape drive device files
      5.  
        Verifying the device configuration on Linux
      6.  
        About SAN clients on Linux
      7.  
        About SCSI persistent bindings for Linux
      8.  
        About Emulex HBAs
      9.  
        Utilities to test SCSI devices
      10.  
        Linux command summary
    2. Solaris
      1.  
        Before you begin on Solaris
      2.  
        About the NetBackup sg driver
      3.  
        Determining if the NetBackup sg driver is installed
      4.  
        Special configuration for the StorEdge Network Foundation HBA driver
      5.  
        About binding Fibre Channel HBA drivers
      6.  
        Configuring Solaris 10 x86 for multiple drive paths
      7. Installing/reinstalling the sg and the st drivers
        1.  
          st.conf file example
        2.  
          sg.conf file example
        3.  
          sg.links file example
      8.  
        Configuring 6 GB and larger SAS HBAs in Solaris
      9.  
        Preventing Solaris driver unloading
      10. About Solaris robotic controls
        1.  
          About SCSI and FCP robotic controls on Solaris
        2.  
          Examples of SCSI and FCP robotic control device files on Solaris
      11. About Solaris tape drive device files
        1.  
          About Berkeley-style close
        2.  
          About no rewind device files on Solaris
        3.  
          About fast-tape positioning (locate-block) on Solaris
        4.  
          About SPC-2 SCSI reserve on Solaris
        5.  
          Disabling SPC-2 SCSI reserve on Solaris
        6.  
          About nonstandard tape drives
      12. Configuring Solaris SAN clients to recognize FT media servers
        1.  
          Adding the FT device entry to the st.conf file
        2.  
          Modifying the st.conf file so that Solaris discovers devices on two LUNS
      13.  
        Uninstalling the sg driver on Solaris
      14.  
        Solaris command summary
    3. Windows
      1.  
        Before you begin configuring NetBackup on Windows
      2.  
        About tape device drivers on Windows
      3.  
        Attaching devices to a Windows system
  3. Section II. Robotic storage devices
    1. Robot overview
      1.  
        NetBackup robot types
      2. NetBackup robot attributes
        1.  
          ACS robots
        2.  
          TLD robots
      3.  
        Table-driven robotics
      4.  
        Robotic test utilities
      5. Robotic processes
        1.  
          Processes by robot type
        2.  
          Robotic process example
    2. Oracle StorageTek ACSLS robots
      1.  
        About Oracle StorageTek ACSLS robots
      2.  
        Sample ACSLS configurations
      3.  
        Media requests for an ACS robot
      4.  
        About configuring ACS drives
      5.  
        Configuring shared ACS drives
      6.  
        Adding tapes to ACS robots
      7. About removing tapes from ACS robots
        1.  
          Removing tapes using the ACSLS utility
        2.  
          Removing tapes using NetBackup
      8. Robot inventory operations on ACS robots
        1.  
          Configuring a robot inventory filtering on ACS robots
      9. NetBackup robotic control, communication, and logging
        1.  
          NetBackup robotic control, communication, and logging for Windows systems
        2. NetBackup robotic control, communication, and logging for UNIX systems
          1.  
            NetBackup ACS daemon (acsd)
          2.  
            NetBackup ACS SSI event logger (acssel)
          3.  
            Using acssel with a different socket name
          4.  
            NetBackup ACS storage server interface (acsssi)
          5.  
            About the ACS_SSI_SOCKET configuration option
          6.  
            Starting acsssi manually
          7.  
            Optional environment variables
      10. ACS robotic test utility
        1.  
          acstest on Windows systems
        2.  
          acstest on UNIX systems
      11.  
        Changing your ACS robotic configuration
      12. ACS configurations supported
        1.  
          Multiple ACS robots with one ACS library software host
        2.  
          Multiple ACS robots and ACS library software hosts
      13.  
        Oracle StorageTek ACSLS firewall configuration
    3. Device configuration examples
      1.  
        An ACS robot on a Windows server example
      2.  
        An ACS robot on a UNIX server example

Configuring a robot inventory filtering on ACS robots

If you want NetBackup to use only a subset of the volumes under ACS library control, you can filter the volume information from the library. To do so, you use the ACSLS administrative interface to assign the volumes you want to use to a scratch pool or pools. Then you configure NetBackup to use only the volumes in those scratch pools.

A NetBackup robot inventory includes the volumes that exist in the ACS scratch pool. The ACS library software moves each volume from the scratch pool after it is mounted.

A partial inventory also includes those volumes that NetBackup can validate exist in the robotic library, including volumes not in the ACS scratch pool. To prevent losing track of previously mounted volumes, the library reports the complete list of volumes that exist in the robotic library.

The following procedure is an example of how to configure an inventory filter.

To configure an inventory filter (example)

  1. Use the ACSLS administrative interface (ACSSA) command to create a scratch pool. Assign ID 4 and 0 to 500 as the range for the number of volumes, as follows:
    ACSSA> define pool 0 500 4
  2. Use the ACSLS administrative interface (ACSSA) command to define the volumes in scratch pool 4:
    ACSSA> set scratch 4 600000-999999
  3. On the NetBackup media server from which you invoke the inventory operation, add an INVENTORY_FILTER entry to the vm.conf file. The following is the usage statement:
    INVENTORY_FILTER = ACS robot_number BY_ACS_POOL acs_scratch_pool1 
[acs_scratch_pool2 ...]

    The following define the options and arguments:

    • robot_number is the number of the robot in NetBackup.

    • acs_scratch_pool1 is the scratch pool ID as configured in the ACS library software.

    • acs_scratch_pool2 is a second scratch pool ID (up to 10 scratch pools are allowed).

    For example, the following entry forces ACS robot number 0 to query scratch volumes from Oracle StorageTek pool IDs 4 and 5.

    INVENTORY_FILTER = ACS 0 BY_ACS_POOL 4 5