Veritas NetBackup™ Cloud Administrator's Guide

To configure a cloud storage server by using the wizard

1. In the NetBackup Administration Console connected to the NetBackup master server, select either NetBackup Management or Media and Device Management.
2. In the right pane, click Configure Cloud Storage Servers.
3. Click Next on the welcome panel.

   The Select cloud provider panel appears.

   The following is an example of the panel:

   

4. On the Select cloud provider panel, perform one of the following:

   • Select the cloud provider from the Cloud storage providers list of cloud providers.

   • Sort the list of cloud providers by selecting the cloud storage API type from the Storage API type drop-down list and then selecting the cloud provider.

   • In the Cloud storage providers search box, type the cloud provider name that you want to select. A cloud provider may support multiple cloud storage API types. Select an appropriate provider.

5. Click Next. A wizard panel for the selected cloud provider appears.
6. Select the preferred storage class and click Next.

   Note:

   This option is available only for Amazon and Amazon GovCloud cloud providers. See About Amazon S3 storage classes.

7. Specify the following settings on the Specify object size, compression, and encryption settings panel.

   Note:

   NetBackup media servers that are older than the 7.7.3 version do not support data compression. Therefore, if you have selected an older media server, the compression option does not appear on the panel.

   Caution:

   If you use NetBackup commands to add a NetBackup 7.7.3 or earlier media server to a cloud storage environment that uses compression, cloud backups may fail. Ensure that all media servers that you add to a cloud storage configuration with the compression are NetBackup 7.7.3 or later.

   • To specify a custom object size, enter a value in the Object Size field. If you do not update the value, the default object size is used.

     Note:

     The object size must be less than or equal to the read or write buffer size.

   • To compress your backup data, select Compress data before writing to cloud storage.

     See About data compression for cloud backups.

   • To encrypt the data that would go on cloud storage , select Encrypt data using AES-256 before writing to cloud storage. Then, enter the information to protect the KMS database.

     See KMS database encryption settings.

   Click Next. If you entered the compression and the encryption information, a dialog box appears that explains that you cannot change the settings after configuration. Click Yes to proceed or click No to cancel. If you click Yes, the Cloud Storage Server Configuration Summary panel appears.

8. On the Cloud Storage Server Configuration Summary panel, verify the selections.

   If you need to make corrections, click Back until you reach the panel on which you need to make corrections.

   If the selections are OK, click Next. The wizard creates the storage server, and the Storage Server Creation Confirmation panel appears.

9. On the Storage Server Creation Confirmation panel, do one of the following:

   • To continue to the Disk Pool Configuration Wizard, click Next.

     See Configuring a disk pool for cloud storage.

   • To exit from the wizard, click Finish.

     If you exit, you can still create a disk pool.

     See Configuring a disk pool for cloud storage.