Cluster Server 7.4.2 Configuration Guide for Custom Applications - Windows

Last Published:
Product(s): InfoScale & Storage Foundation (7.4.2)
Platform: Windows
  1. Introducing the Veritas High Availability solution for VMware
    1. How does the Veritas High Availability solution work
      1.  
        How the VMwareDisks agent communicates with the vCenter Server instead of the ESX/ESXi host
      2.  
        Typical VCS cluster configuration in a virtual environment
      3.  
        How does the Veritas High Availability solution integrate with vSphere Web Client
    2.  
      Supported VMware versions
    3.  
      Managing storage
  2. Configuring application monitoring using the Veritas High Availability solution
    1.  
      Deploying the Veritas High Availability solution for configuring application monitoring
    2. Notes and recommendations
      1. Assigning privileges for non-administrator ESX/ESXi user account
        1.  
          Creating a role
        2.  
          Integrating with Active Directory or local authentication
        3.  
          Creating a new user
        4.  
          Adding a user to the role
    3. Configuring application monitoring
      1.  
        Configuring the VCS cluster
      2.  
        Configuring the application
    4.  
      Modifying the ESXDetails attribute
  3. Administering application monitoring
    1.  
      About the various interfaces available for performing application monitoring tasks
    2. Administering application monitoring using the Veritas High Availability tab
      1. Understanding the Veritas High Availability tab work area
        1.  
          To view the status of configured applications
      2.  
        To configure or unconfigure application monitoring
      3.  
        To start or stop applications
      4.  
        To switch an application to another system
      5.  
        To add or remove a failover system
      6.  
        To suspend or resume application monitoring
      7.  
        To clear Fault state
      8.  
        To resolve a held-up operation
      9.  
        To determine application state
      10.  
        To remove all monitoring configurations
      11.  
        To remove VCS cluster configurations
    3.  
      Administering application monitoring settings
    4. Administering application availability using Veritas High Availability dashboard
      1. Understanding the dashboard work area
        1.  
          Aggregate status bar
        2.  
          ESX cluster/host table
        3.  
          Taskbar
        4.  
          Filters menu
        5.  
          Application table
      2.  
        Monitoring applications across a data center
      3.  
        Monitoring applications across an ESX cluster
      4.  
        Searching for application instances by using filters
      5.  
        Selecting multiple applications for batch operations
      6.  
        Starting an application using the dashboard
      7.  
        Stopping an application by using the dashboard
      8.  
        Entering an application into maintenance mode
      9.  
        Bringing an application out of maintenance mode
      10.  
        Switching an application
      11.  
        Resolving dashboard alerts
  4. Appendix A. Troubleshooting
    1. Troubleshooting application monitoring configuration issues
      1.  
        Veritas High Availability Configuration Wizard displays the "hadiscover is not recognized as an internal or external command" error
      2.  
        Running the 'hastop - all' command detaches virtual disks
      3.  
        Validation may fail when you add a failover system
      4.  
        Adding a failover system may fail if you configure a cluster with communication links over UDP
    2. Troubleshooting Veritas High Availability view issues
      1.  
        Veritas High Availability tab not visible from a cluster node
      2.  
        Veritas High Availability tab does not display the application monitoring status
      3.  
        Veritas High Availabilitytab may freeze due to special characters in application display name
      4.  
        Veritas High Availability view may fail to load or refresh
      5.  
        Operating system commands to unmount resource may fail

To suspend or resume application monitoring

After configuring application monitoring you may want to perform routine maintenance tasks on those applications. These tasks may or may not involve stopping the application but may temporarily affect the state of the applications and its dependent components. If there is any change to the application status, Cluster Server (VCS) may try to restore the application state. This may potentially affect the maintenance tasks that you intend to perform on those applications.

If stopping the application is not an option, you can suspend application monitoring and create a window for performing such maintenance tasks. When application monitoring is suspended, VCS freezes the application configuration.

The Enter Maintenance Mode link is automatically dimmed if the application is already in maintenance mode. Conversely, if the application is not in maintenance mode, the Exit Maintenance Mode link is dimmed.

The Veritas High Availability tab provides the following options:

To enter maintenance mode

  1. In the appropriate row, click More> Enter Maintenance Mode.

    During the time the monitoring is suspended, Veritas High Availability solutions do not monitor the state of the application and its dependent components. The Veritas High Availability tab does not display the current status of the application. If there is any failure in the application or its components, VCS takes no action.

  2. While in maintenance mode, if a virtual machine restarts, if you want application monitoring to remain in maintenance mode, then in the Enter Maintenance Mode panel, check the Suspend the application availability even after reboot check box, and then click OK to enter maintenance mode.

To exit the maintenance mode

  1. In the appropriate row, click More > Exit Maintenance Mode, and then click OK to exit maintenance mode.
  2. Click the Refresh icon in the top right corner of the Veritas High Availability tab, to confirm that the application is no longer in maintenance mode.