Veritas Access インストールガイド

Veritas Access のインストールと設定のためのサンプル応答ファイル

Veritas Access のインストールと設定のための応答ファイルの例を次に示します。

####################################################
our %CFG;
#Installs Product packages. 
$CFG{opt}{install}=1;
$CFG{opt}{installallpkgs}=1;
$CFG{opt}{comsetup}=1;
$CFG{opt}{noipc}=1;
$CFG{opt}{ssh}=1;
$CFG{prod}="SNAS73";
$CFG{opt}{licensefile}="<absolute_path_of_licfile>";

#Performs the configuration if the packages are already installed
$CFG{opt}{configure}=1;

#the PCI IDs of slave NICs
$CFG{bondpool}{bond0}=[ qw(0000:02:09.0 0000:02:07.0) ];
$CFG{bondpool}{bond1}=[ qw(0000:02:04.0 0000:02:08.0) ];

#mode of each bond
$CFG{bondmode}{bond0}=5;
$CFG{bondmode}{bond1}=6;

#names of bond
$CFG{bondname}=[ qw(bond0 bond1) ];

#the PCI IDs of excluded NICs
$CFG{exclusion}=[ qw(0000:02:03.0 0000:02:0a.0) ];

#the PCI IDs of all the bonded NICs
$CFG{publicbond}=[ qw(0000:02:03.0 0000:02:04.0 0000:02:07.0
0000:02:08.0) ];

#public IPs
$CFG{publiciparr}=[ qw(10.200.58.100 10.200.58.101 10.200.58.102
10.200.58.103 10.200.58.104 10.200.58.105 10.200.58.106 10.200.58.107) ];

#netmask for public IPs
$CFG{publicnetmaskarr}=[ qw(192.168.30.10 192.168.30.11 192.168.30.12 
192.168.30.13 192.168.30.14 192.168.30.15 192.168.30.16 192.168.30.17) ];

#the user name to register with Red Hat subscription management
$CFG{redhat_subscription_username}="rhel_user";

#the password to register with Red Hat subscription management
$CFG{redhat_subscription_password}="rhel_password";

#clustername of SNAS
$CFG{snas_clustername}="testsnas";

#console IP of SNAS
$CFG{snas_consoleip}="192.168.30.40";

#default gateway of SNAS
$CFG{snas_defgateway}="192.168.30.1";

#domain name of DNS
$CFG{snas_dnsdomainname}="cdc.veritas.com";

#IP of DNS
$CFG{snas_dnsip}="192.168.30.2";

#NTP server name
$CFG{snas_ntpserver}="ntp.veritas.com";

#number of VIPs on each NIC
$CFG{snas_nvip}=1;

#netmask of public IPs(only ipv4 environment)
$CFG{snas_pnmaskstart}=255.255.255.0;

#the initial IP of public IPs
$CFG{snas_pipstart}="192.168.30.10";

#if use separate console port, 1 for yes, 0 for no
$CFG{snas_sepconsoleport}="0";

#netmask of virutal IPs(only ipv4 environment)
$CFG{snas_vnmaskstart}=255.255.255.0;

#the initial IP of virtual IPs
$CFG{snas_vipstart}="192.168.30.18";

#virtual IPs
$CFG{virtualiparr}=[ qw(192.168.30.18 192.168.30.19 192.168.30.20
 192.168.30.21 192.168.30.22 192.168.30.23 192.168.30.24 192.168.30.25) ];

#netmask for virual IPs
$CFG{virtualnetmaskarr}=[ qw(255.255.255.0 255.255.255.0 255.255.255.0 
255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0) ];

#target systems
$CFG{systems}=[ qw(192.168.30.80 192.168.30.81) ];

#indicates whether to start llt/gab when user wants to setup a single
node cluster
$CFG{vcs_allowcomms}=1;

#define the unique cluser id with a string number
$CFG{vcs_clusterid}=325;

#define the cluster name with a string
$CFG{vcs_clustername}="testsnas";

#define the nic name for the first heartbeat link.
$CFG{vcs_lltlink1}{"192.168.30.10"}="priveth0";
$CFG{vcs_lltlink1}{"192.168.30.13"}="priveth0";
$CFG{vcs_lltlink2}{"192.168.30.10"}="priveth1";
$CFG{vcs_lltlink2}{"192.168.30.13"}="priveth1";

#define the encrypted user password
$CFG{vcs_userenpw}=[ qw(GPQiPKpMQlQQoYQkPN) ];

#define the added username for VCS
$CFG{vcs_username}=[ qw(admin) ];

#define the user privilege
$CFG{vcs_userpriv}=[ qw(Administrators) ];

1;
####################################################