Veritas Access 安装指南

从绑定列表中移除 NIC

1. 在 Veritas Access 安装期间，安装程序将提示您输入自己的选择。输入 8 将从绑定列表中移除 NIC。

   注意:

   NIC 绑定或 NIC 排除配置选项既支持单个 NIC/绑定，也支持多个 NIC/绑定。

   NIC selection/NIC bonding/NIC VLAN configuration
   
   Common NICs on all systems:
   
   NIC        Type       Properties         Public
   ======================================================
   ens161     Physical   -                  N
   ens192     Physical   Slave of bond1
   ens193     Physical   Slave of bond1
   ens224     Physical   Slave of bond0
   ens225     Physical   Slave of bond0
   ens256     Physical   -                  N
   ens257     Physical   -                  Y
   bond0      Virtual    Bond balance-rr    Y
   bond1      Virtual    Bond active-backup Y
   
        1)  Select public NICs
        2)  Select private NICs
        3)  Exclude NICs
        4)  Include NICs
        5)  Create a new bond
        6)  Add NICs to a bond
        7)  Remove bonds
        8)  Remove NICs from the bond list
        9)  Create VLAN device
       10)  Delete VLAN device
       11)  Save and continue
   
   Select the NIC option to be configured in this cluster: [1-11,q] 8

2. 选择要从 NIC 绑定中移除的 NIC。

   Choose NICs to be deleted from the NIC bonding
   
        1)  ens192
        2)  ens193
        3)  ens224
        4)  ens225
        b)  Back to previous menu
   
   Choose NICs, separated by spaces: [1-4,b,q,?] 1
   
   Removing ens192 from bonding was successful
   
   Press [Enter] to continue:
   NIC selection/NIC bonding/NIC VLAN configuration
   
   Common NICs on all systems:
   
   NIC        Type       Properties         Public
   ======================================================
   ens161     Physical   -                  N
   ens192     Physical   -                  Y
   ens193     Physical   Slave of bond1
   ens224     Physical   Slave of bond0
   ens225     Physical   Slave of bond0
   ens256     Physical   -                  N
   ens257     Physical   -                  Y
   bond0      Virtual    Bond balance-rr    Y
   bond1      Virtual    Bond active-backup Y
   
        1)  Select public NICs
        2)  Select private NICs
        3)  Exclude NICs
        4)  Include NICs
        5)  Create a new bond
        6)  Add NICs to a bond
        7)  Remove bonds
        8)  Remove NICs from the bond list
        9)  Create VLAN device
       10)  Delete VLAN device
       11)  Save and continue
   
   Select the NIC option to be configured in this cluster: [1-11,q]