请输入搜索词进行查询
搜索 <book_title>...
Veritas Access 安装指南
Last Published:
2018-05-28
Product(s):
Access (7.4)
Platform: Linux
- Veritas Access 简介
- Veritas Access 授权许可
- 系统要求
- 准备安装 Veritas Access
- 在 VMware ESXi 中部署用于安装 Veritas Access 的虚拟机
- 安装和配置群集
- 使用响应文件自动运行 Veritas Access 安装和配置
- 显示和添加群集节点
- 升级 Veritas Access和操作系统
- 使用滚动升级来升级 Veritas Access
- 卸载 Veritas Access
- 附录 A. 安装参考
- 附录 B. 配置安全 Shell 进行通信
- 附录 C. 手动部署 Veritas Access
创建 VLAN 设备
您可以为公用 NIC 接口或公用绑定创建 VLAN 设备。
请参见关于 VLAN 标记。
注意:
如果您需要在配置 Veritas Access 网络时将 VLAN 接口用作公用 NIC,则必须在安装 Veritas Access 期间将在其中创建 VLAN 的 NIC 添加为公用 NIC。
例如,在安装 Veritas Access 时,如果 VLAN 为 eth0.100
,则在配置访问网络期间应选择 eth0.100
和 eth0
作为公用 NIC。
创建 VLAN 设备
- 在手动选择模式下,输入 9 以创建 VLAN 设备。
NIC selection/NIC bonding/NIC VLAN configuration Common NICs on all systems: NIC Type Properties Public ==================================================== ens161 Physical - N ens192 Physical - Y ens193 Physical - Y ens224 Physical Slave of bond0 ens225 Physical Slave of bond0 ens256 Physical - N ens257 Physical - Y bond0 Virtual Bond balance-rr Y 1) Select public NICs 2) Select private NICs 3) Exclude NICs 4) Include NICs 5) Create a new bond 6) Add NICs to a bond 7) Remove bonds 8) Remove NICs from the bond list 9) Create VLAN device 10) Delete VLAN device 11) Save and continue Select the NIC option to be configured in this cluster: [1-11,q] 9
- 选择要在其中创建 VLAN 设备的 NIC。
- 输入设备的 VLAN ID。
Choose NICs to create VLAN device on: 1) ens161 2) ens192 3) ens193 4) ens256 5) ens257 6) bond0 b) Back to previous menu Choose VLAN devices, separated by spaces: [1-6,b,q] 2 Enter the VLAN ID for the device (1-4094): [b,q,?] 100 NIC selection/NIC bonding/NIC VLAN configuration Common NICs on all systems: NIC Type Properties Public ==================================================== ens161 Physical - N ens192 Physical - Y ens193 Physical - Y ens224 Physical Slave of bond0 ens225 Physical Slave of bond0 ens256 Physical - N ens257 Physical - Y bond0 Virtual Bond balance-rr Y ens192.100 Virtual VLAN 100 - 1) Select public NICs 2) Select private NICs 3) Exclude NICs 4) Include NICs 5) Create a new bond 6) Add NICs to a bond 7) Remove bonds 8) Remove NICs from the bond list 9) Create VLAN device 10) Delete VLAN device 11) Save and continue Select the NIC option to be configured in this cluster: [1-11,q]