Please enter search query.
Search <book_title>...
Veritas NetBackup™ 5240 Appliance Hardware Installation Guide
Last Published:
2020-05-06
Product(s):
Appliances (Version Not Specified)
Platform: Veritas 5240
- Hardware overview
- Preinstallation requirements
- Installation procedures
- Appendix A. Adding one or more storage shelves to an operating appliance that does not have any storage shelves
- Appendix B. Adding storage shelves to an operating appliance that has at least one storage shelf attached
- Appendix C. Adding the disk space of additional storage shelves
Installing the storage shelf or shelves into a rack
The storage shelf should be installed from the front of the rack.
To install a storage shelf
- Use two people to lift the storage shelf.
- Slide the rear of the shelf into the front of the rails. Be sure that the shelf is straight and even inside the rack. Do not force the shelf to fit.
- Carefully push the shelf towards the rear of the rails.
- Verify that the end cap is not attached to the left and the right sides of the front of the shelf.
- Insert one screw into the rack, on the left and the right front of the shelf.
- Replace the end caps or attach the bezel to the front of the shelf.