Please enter search query.
Search <book_title>...
Veritas NetBackup™ 5240 Appliance Hardware Installation Guide
Last Published:
2020-05-06
Product(s):
Appliances (Version Not Specified)
Platform: Veritas 5240
- Hardware overview
- Preinstallation requirements
- Installation procedures
- Appendix A. Adding one or more storage shelves to an operating appliance that does not have any storage shelves
- Appendix B. Adding storage shelves to an operating appliance that has at least one storage shelf attached
- Appendix C. Adding the disk space of additional storage shelves
Attaching the storage shelf bezel
Use the following procedure to attach the storage shelf bezel after you install the NetBackup 5240 Storage Shelf in the rack.
To attach the storage shelf bezel
- Remove the bezel from its packaging.
Note:
Ensure the end caps that cover the storage shelf control panel on the left and the blank panel on the right are not installed. The bezel cannot be attached if the end caps are installed on the panels.
- With the front of the storage shelf bezel facing you, place the bezel over the front panel of the storage shelf.
The bezel should cover the left control panel assembly and the right panel assembly.
- With the bezel in position, gently press it onto the front panel of the storage shelf.
The bezel is fully seated and correctly installed when it snaps into place on the front panel of the storage shelf.