Please enter search query.
Search <book_title>...
Veritas InfoScale™ Operations Manager 7.3 Release Notes
Last Published:
2018-02-16
Product(s):
InfoScale & Storage Foundation (7.3)
Platform: AIX,Linux,Solaris,Windows
- Overview of this release
- System requirements
- Software limitations
- Veritas InfoScale Operations Manager 7.3 managed host not supported on AIX in Network Installation Manager
- No coexistence of managed host and CommandCentral Storage Management Server
- Live statistics for initiators are not supported on HP-UX
- Volume layout not discovered for LDM-managed volumes mounted without a drive letter
- Backup and restore limitations in Veritas InfoScale Operations Manager 7.3
- Veritas InfoScale Operations Manager does not support the discovery of LDoms and Zones together on the same host
- Deployment-related limitations
- Windows Management Server high availability configuration limitations
- Solaris Zones virtualization support limitations
- Discovery limitations for virtualization support
- VCS configuration check reports violations only if at least one node in the cluster is running Cluster Server
- Limitations related to the correlation between the disks and the disk groups
- CIFS shares from NetApp and Celerra arrays that are mapped to a Windows host are not discovered
- Limitations on SF operations on Windows CVM cluster
- Add host operation fails for RHEL 7 managed hosts
- ESX servers not able to access an RDM disk associated with a shared datastore might cause failed discovery of RDM disk by Veritas InfoScale Operations Manager
- Sometimes Internet Explorer displays a security warning when you navigate between pages in the console
- Cannot configure an EMC CLARiiON enclosure on a Windows control host using a security file
- Veritas InfoScale Operations Manager does not validate if the cluster node is managed by the Management Server during the VBS start operation
- Known issues
- Management Server issues
- Manual upgrade of a VRTS package fails if publisher is set to Symantec (3869503)
- Delayed discovery of VMware VirtualCenter server by Control Hosts in Veritas InfoScale Operations Manager (2342314)
- Authentication broker crashes while performing LDAP authentication (2017319)
- XPRTLD daemon fails when Veritas InfoScale Operations Manager starts because of the corrupt AT pem files in the VRTSsfmh package (2145925)
- Uninstalling Management Server removes the managed host package from a Storage Foundation for Windows host
- Veritas InfoScale Operations Manager displays stale application status (2564572)
- Manual refresh of HMC Server and VMware vCenter Server required after migration of virtual machines (2605533)
- Performance metering of a VMware ESX server may not work properly after failover (2814844)
- For VMware virtual machine, the virtual storage correlation is not functional if a SCSI controller of non-default type is used (3056561)
- Erroneous managed host status reported in Veritas InfoScale Operations Manager high availability (HA) environment (2780631)
- Information on running tasks is accurate only for managed hosts 6.0 and later (3077899)
- Veritas InfoScale Operations Manager does not discover virtual machines with same BIOS GUID on a Hyper-V Server (3509138)
- Disk information for the cluster does not display correct data for host (3532746)
- Disk correlation does not happen for LDOM storage container after enabling MPxIO on the SAN disks (3370824)
- Qualsys scan may at times fail for port 5634 (2903776)
- Remote switch operation fails because of group operator privileges (3899833)
- Adding managed host version 7.0 to VIOM 7.3 CS fails (3902108)
- Service group status is not displayed correctly (3915580)
- Windows: Unable to set up or reconfigure CMS HA (3916993)
- Managed host issues
- Quick I/O cache value is not enabled after performing the storage provisioning operation on AIX managed hosts (2131183)
- Thin LUNs on the hosts that run Storage Foundation for Windows 5.1 SP1 are not discovered as thin (2513466)
- Remote switch operation fails between secure clusters (2530605 )
- Add host operation fails for HP-UX managed hosts (2601265)
- Unable to view performance graphs for VxVM disk and volume on Windows platform (3054870)
- Cannot add a managed host to Management Server using the IPv6 address of the host (2816487)
- Incorrect statistics returned by DMP if Storage Foundation version is prior to 5.0 MP3 (2796418)
- Create disk group operation fails when triggered from slave node in a clustered configuration (3196104)
- On HP-UX managed hosts, the path initiator and array port information is not displayed for some disks (3073128)
- Network File System on Solaris cannot be discovered if the Fully Qualified Host Name is used in vfstab file but not used for mounting the file system (2747735)
- Bandwidth tab displays incorrect data for a UNIX host (3484788)
- CVR operations may not work correctly in case of managed host versions lower than 7.0(3745404)
- Adding managed host versions lower than 7.0 to an upgraded 7.0 Management results in error
- Management Server console displays incorrect version for ApplicationHA guests (3873640)
- Unable to add older managed hosts to freshly installed Management Server 7.0 or 7.1
- Management Server console displays incorrect version for ApplicationHA guests (3873640)
- Unable to complete 'add secondary' workflow in some cases (3874690)
- VRTSsfmh 7.1 and VxVM 7.0 co-existence issue on AIX (3870438)
- Unable to add older version managed host to VIOM CS 7.3 (3915530)
- Windows CS: Unable to configure arrays discovered through SSH (3915564)
- Unable to upgrade AIX MH to 7.3 through VIOM GUI (3914690)
- Agentless discovery issues
- Storage Insight Add-on issues
- After the first discovery of IBM SVC array, manual refresh of putty cache may be required (3114164)
- For locally replicated EMC Symmetrix LUNs, last synchronization time is available only for SYMCLI version 7.4 or later (3249430)
- Manual discovery of Symmetrix enclosure is required when SYMCLI version is upgraded on the Storage Insight add-on discovery host (3289628)
- Performance metering of enclosures may not work properly after failover (2814844)
- Information on FAST managed storage groups for EMC Symmetrix VMAX enclosures is not discovered periodically (2842124)
- Password file option does not work while configuring HP EVA enclosures on Windows hosts (2757601)
- EMC Celerra enclosure details are not discovered for users with read-only access rights, and Imported Administrator or Operator role
- Tier information is not displayed for some devices in a FAST managed storage group (2795204)
- IBM System Storage DS enclosure discovery is not supported through HiCommand Server 7 in Veritas InfoScale Operations Manager (2708346)
- Virtual Business Service issues
- Storage Insight SDK Add-on issues
- Fabric Insight Add-on issues
- Application Migration Add-on issues
- Application migration plan execution fails if the web server goes down
- Error displayed during executing vxlist utility (3870438)
- DiskGroup or CVMVolDg type resources may not be displayed in the Target Disk Information panel
- Recurrent failure of either the Setup Storage operation during mirror creation or Rehearse/Migrate operation during mirror detach
- Unable to install the Application Migration add-on on slave node (3915236)
- Other issues
- Duplicate entries for the disks that are part of a virtual machine (2481982)
- Unable to configure Management Server with a user name in Russian language using Firefox browser
- Coexistence of ApplicationHA Console 6.0 and Veritas InfoScale Operations Manager 7.3 not supported (2739241)
- Resource attributes not discovered for RVGPrimary Resource
- Discovery of VMware VirtualCenter server or ESX server is not case - sensitive (2567318)
- Offline instances not displayed in instance tab for MSSQL HA configuration (3516063)
- Only one virtual machine configured as resource gets discovered (3488469)
- A single host may have two entries on the host tab in certain conditions(3724295)
- Incorrect virtual machine count in case of duplicate biosuuid (3782776)
- Need to refresh the array for Datastore to NFS correlation
- Special characters not allowed in the password while configuring the array (3677693)
- Creating Atleast Dependency of resources for VCS 7.0 on windows is allowed
- Resource dependency for VCS 7.0 on Windows cannot be viewed
- Applicable hosts pane disappears if you filter hot fixes by platform (3874690)
- vxlicrep (license reporting) utility fails to execute if Microsoft Visual C++ 2010 x86 Runtime is not installed (3902028)
- Service group state not showing properly in Veritas InfoScale Operations Manager for a single node cluster
- Management Server issues
- Appendix A. Getting help
32-bit SNIA Common HBA API required on Windows hosts
For proper discovery of Fibre Channel attached devices - including discovery of HBA and its target ports - Veritas InfoScale Operations Manager requires installation of the 32-bit SNIA Common HBA API on all Windows managed hosts running HBA controllers.
The Common HBA API is typically available as part of your HBA vendor's driver kit, or you can download it from your HBA vendor's site.
Follow these steps to determine if the SNIA Common HBA API is already present on your Windows host.
To verify that the 32-bit SNIA Common HBA API is installed on a Windows host
- Open the registry editor on the managed host using the regedit command.
- Check the following location to get the SNIA library information:
HKEY_LOCAL_MACHINE\SOFTWARE\SNIA\HBA\hba_model
On 64-bit platforms, Veritas InfoScale Operations Manager requires 32-bit libraries installed as a pre-requisite. For more information, see your HBA vendor documentation.