Cluster Server 7.3.1 Bundled Agents Reference Guide - Linux
- Introducing Bundled agents
- Storage agents
- DiskGroup agent
- DiskGroupSnap agent
- Notes for DiskGroupSnap agent
- Sample configurations for DiskGroupSnap agent
- Volume agent
- VolumeSet agent
- Sample configurations for VolumeSet agent
- LVMLogicalVolume agent
- LVMVolumeGroup agent
- Sample configurations for LVMVolumeGroup agent
- Mount agent
- Sample configurations for Mount agent
- VMwareDisks agent
- SFCache agent
- AWS EBSVol agent
- AzureDisk agent
- Network agents
- About the network agents
- IP agent
- NIC agent
- Notes for the NIC agent
- Sample configurations for NIC agent
- IPMultiNIC agent
- MultiNICA agent
- IP Conservation Mode (ICM) for MultiNICA agent
- Performance Mode (PM) for MultiNICA agent
- Sample configurations for MultiNICA agent
- DNS agent
- Agent notes for DNS agent
- About using the VCS DNS agent on UNIX with a secure Windows DNS server
- Sample configurations for DNS agent
- AWSIP agent
- AWSRoute53 agent
- AzureIP agent
- AzureDNSZone agent
- File share agents
- NFS agent
- NFSRestart agent
- Share agent
- About the Samba agents
- SambaServer agent
- SambaShare agent
- NetBios agent
- Service and application agents
- Apache HTTP server agent
- Application agent
- Notes for Application agent
- Sample configurations for Application agent
- CoordPoint agent
- KVMGuest agent
- Notes for KVMGuest agent
- Sample configurations for KVMGuest environment
- Sample configurations for RHEV environment
- Process agent
- Usage notes for Process agent
- Sample configurations for Process agent
- ProcessOnOnly agent
- AzureAuth agent
- Infrastructure and support agents
- Testing agents
- Replication agents
- RVG agent
- RVGPrimary agent
- RVGSnapshot
- RVGShared agent
- RVGLogowner agent
- RVGSharedPri agent
- VFRJob agent
- Dependencies for VFRJob agent
- Notes for the VFRJob agent
Agent functions for IP agent
Online |
Configures the IP address to the NIC. Checks if another system is using the configured IP address and issues a warning. For IPv4 addresses, it uses the ifconfig command to set the IPv4 address on an unique alias of the interface if the Options attribute is configured and none of the IPOptions and IPRouteOptions attributes are configured, else it makes use of the ip command. For IPv6 addresses, the ip command is used. |
Action |
|
Offline | Brings down the IP address that is specified in the Address attribute. |
Monitor | Monitors the interface to test if the IP address that is associated with the interface is alive. |
Clean | Brings down the IP address that is specified in the Address attribute. |