Veritas NetBackup™ Commands Reference Guide
- Introduction
- Appendix A. NetBackup Commands
Name
bpplclients — administer clients within NetBackup policies
SYNOPSIS
policy_name | -allunique [-pt policy_type] [-L | -l | -U | -noheader] [-M master_server,...] [-v]
policy_name [-M master_server,...] [-v] [-generation generation] [-reason "string"] -add host_name hardware_os [-priority priority]
policy_name [-M master_server,...] [-v] [-generation generation] [-reason "string"] -delete host_name ...
policy_name [-M master_server,...] [-v] [-generation generation] [-reason "string"] -modify host_name [-hardware hardware] [-os os] [-priority priority]
policy_name -rename old_client_name new_client_name [-os os] [-priority priority] [-hardware hardware] [-generation generation] [-reason "string"]
[-M master_server,...] [-v] [-generation generation] [-reason "string"] -add_instance instance_name host_name | -delete_instance {instance_name host_name [instance_name2 host_name2] [...]}
[-M master_server,...] [-v] [-generation generation] [-reason "string"] -add_instance_database instance_name database_name host_name | -delete_instance_database {instance_name1 database_name1 host_name1 [instance_name2 database_name2 host_name2] [...]}
[-M master_server,...] [-v] [-generation generation] [-reason "string"] -add_instance_group instance_group_name | -delete_instance_group instance_group_name ...
On UNIX systems, the directory path to this command is /usr/openv/netbackup/bin/admincmd/
On Windows systems, the directory path to this command is install_path\NetBackup\bin\admincmd\
DESCRIPTION
bpplclients does one of the following:
Produces a listing of clients.
Adds a new client to a policy.
Deletes a list of clients from a policy.
Modifies an existing client in a policy.
Adds an instance group, an instance, a specific database in an instance to a SQL Server Intelligent policy.
Deletes an instance group, an instance, a specific database in an instance from a SQL Server Intelligent policy.
For the -add, -delete, and -modify options, bpplclients returns to the system prompt immediately after it submits the client change request to NetBackup. To determine whether the change was successful, run bpplclients again to list the updated client information.
When the listing option is used, the list is ordered alphabetically by client name. Each client entry is on a single line, with a single entry for each client.
Authorized users can initiate this command.
For more about NetBackup authorization, see the NetBackup Security and Encryption Guide.
OPTIONS
bpplclients consists of two forms. The bpplclients form that you use determines the options that you use with bpplclients.
The first form of bpplclients has no options and produces a listing of information about the clients for all policies. For SQL Server Intelligent policies, bpplclients produces a list of the instance groups or the instances and databases for all policies. If you have other policy types, it is best to use bpplclients policy_name to display the backup selections for an MS-SQL-Server policy.
The second form of bpplclients produces a listing of information about the clients for a single policy or for all policies. The following options apply to this form:
- -add host_name hardware os [priority]
Adds a client to the policy. If the local system has defined the maximum number of clients already, an error is returned. The maximum number of clients is unlimited (the installation default) for NetBackup Enterprise Server and 4 for NetBackup Server. Specify the host name, hardware type, and operating system. The priority option is not implemented at this time.
To back up a Nutanix Acropolis Cluster, you must add the display name of the virtual machine. The display name of a virtual machine is case-sensitive and it must not include a space.
- -add_instance_database instance_name database_name host_name
This option applies to SQL Server intelligent policies. Adds a specific database in an instance to the policy.
In the policy attributes (bpplinfo), -client_list_type must be set to 1 (INSTANCE). You can add instances and databases to the same policy. You cannot add instance groups to a policy that contains instances or databases.
- -add_instance instance_name host_name
This option applies to SQL Server intelligent policies. Adds an instance to the policy.
In the policy attributes (bpplinfo), -client_list_type must be set to 1 (INSTANCE). You can add instances and databases to the same policy. You cannot add instance groups to a policy that contains instances or databases.
- -add_instance_group instance_group_name
This option applies to SQL Server intelligent policies. Adds an instance group to the policy.
In the policy attributes (bpplinfo), -client_list_type must be set to 2 (INSTANCE_GROUP). You cannot add instances or databases to a policy that contains instance groups.
- -delete host_name ...
Deletes one or more clients from the policy. Up to 20 clients can be deleted at a time. Specify the clients as a space-delimited list of host names.
- -delete_instance {instance_name host_name [instance_name2 host_name2] [...]}
This option applies to SQL Server intelligent policies. Deletes an instance from the policy. Up to 20 instances can be deleted at a time. Group instances and host names in a space-delimited list.
- -delete_instance_database {instance_name1 database_name1 host_name1 [instance_name2 database_name2 host_name2] [...]}
This option applies to SQL Server intelligent policies. Deletes a database in an instance from the policy. Up to 20 databases can be deleted at a time. Group database names, instance names, and host names in a space-delimited list.
- -delete_instance_group instance_group_name ...
This option applies to SQL Server intelligent policies. Deletes an instance group from the policy. Up to 20 instance groups be deleted at a time. Specify the names in a space-delimited list.
- -generation generation
Ensures that the command acts on a specific generation or version of a policy. The generation value increments each time a policy is saved. Use bpplinfo or bppllist to list the current generation value. If no generation is specified, the command acts on the current version.
- -hardware hardware
Specifies the hardware type of this client. In the dialog box for adding clients to a policy with the Backup Policy Management utility, select one of the hardware types.
- -L
Displays the listing in long format. No two-line header appears at the top of the listing; the header is embedded in the line for each client. The line for each client includes the following fields:
Client/HW/OS/Pri: (the header)
Client name
Hardware type
Operating system
Priority
Ignore the four additional fields. They are either unused or used for internal processes.
- -l
Displays the listing in short format; this option produces a terse listing. It also is called raw output mode. No two-line header appears at the top of the listing; the header is embedded in the line for each client. The listing consists of the following fields:
Field 1 = Client name
Field 2 = Hardware. The operating system type of the client. Example: Linux
Field 3 = Operating system name of the client. Example: RedHat
Field 4 = Priority. The priority of the client in the specified policy.
Fields 5-7 are unused.
This option is useful for scripts or the programs that rework the listing contents into a customized report format.
- -M master_server,...
Lists the alternative master servers. This option consists of a comma-delimited list of host names. If this option is present, each master server in the list runs the bpplclients command. Each master server in the list must allow access by the system that issues the bpplclients command. If an error occurs for any master server, the process stops at that point.
If bpplclients produces a list, the list is the composite of the returned information from all the master servers in this list.
If bpplclients adds, deletes, or modifies a client (explained later), the change is made on all the master servers in this list.
- -modify host_name ...
Modifies the attributes for a client within a policy. The client was added to the policy previously. The attribute values follow the client name and replace the previous equivalent attribute values for this client. You must modify at least one of the client's attributes. -priority is not implemented at this time.
- -noheader
Displays the listing without any header. The listing consists of one line for each client, which contains the hardware type, operating system, and client name.
- -os os
Specifies a different operating system for the client. In the dialog box for adding clients to a policy with the Backup Policy Management utility, select one of the operating systems.
The values that you choose for the hardware and the -os options must form a valid combination.
- policy_name | -allunique [-pt policy_type]
policy_name specifies the name of a policy. It lists client information only for that policy.
-allunique without -pt policy_type lists client information for all policies that are defined for NetBackup on the master server.
If you use -allunique -pt policy_type, where policy_type is a specific policy type (such as Sybase), the following occurs: The command lists the client information only for the clients that belong to that type of policy.
If the command line contains neither the policy_type nor -allunique option, the listing contains client information for all policies. If this option is used it must be first on the command line.
- -pt policy_type
Specifies the policy type by entering one of the following character strings (the default is Standard):
BigData DataStore DataTools-SQL-BackTrack DB2 Enterprise-Vault FlashBackup Hyper-V Informix-On-BAR Lotus-Notes MS-Exchange-Server MS-SharePoint MS-SQL-Server MS-Windows NBU-Catalog NDMP Oracle PureDisk-Export SAP Split-Mirror Standard Sybase Vault VMware
- -priority priority
Not implemented.
- policy_name
Identifies the policy that has the client. This option must be the first option on the command line.
- -reason "string"
Indicates the reason that you choose this command action. The reason text string is captured and appears in the audit report. Enclose this string with double quotes ("..."). The string must not exceed 512 characters. It cannot begin with a dash character (-) nor contain a single quotation mark (').
- -rename old_client_name new_client_name
old_client_name specifies the current name of the client and new_client_name specifies the new name.
- -U
Displays the listing in user format. The listing consists of one line for each client, which contains the hardware type, operating system, and client name. A two-line header begins the listing which is the default format.
- -v
Selects the verbose mode. This option causes bpplclients to log additional information for debugging purposes. The information goes into the NetBackup administration daily debug log. This option is meaningful only when you enable the debug log function (that is, when the following directory is defined):
UNIX systems: /usr/openv/netbackup/logs/admin
Windows systems: install_path\NetBackup\logs\admin
This option must precede the -add, -delete, or -modify option on the command line.
EXAMPLES
Example 1 - While the master server runs, list the clients that are known to the master server.
# bpplclients Hardware OS Client --------------- --------------- -------------- Windows-x64 Windows2008 marmot HP9000-800 HP-UX 11.23 squash
This command can also be entered on a client named hatt, with the same results.
Example 2 - List the defined clients for the policy onepolicy:
# bpplclients onepolicy Hardware OS Client --------------- --------------- -------------- Solaris Solaris10 jeckle RS6000 AIX5 streaky HP9000-800 HP-UX 11.31 shark
Example 3 - Add the client marmot to the policy twopolicy on the master servers serv1
and serv2
. The hardware type for lynx is HP9000; the operating system is HP-UX 11.23. The default priority is used.
# bpplclients twopolicy -M serv1,serv2 -add lynx HP9000 HP-UX 11.23
Example 4 - Delete the clients marmot and vole from the policy twopolicy on the master servers serv1 and serv2.
# bpplclients twopolicy -M serv1,serv2 -delete marmot vole
Example 5 - While the master server hatt runs, list client information for policy BackTrack on master server beaver:
# bpplclients BackTrack -M beaver Hardware OS Client --------------- --------------- -------------- Solaris Solaris10 saturn
RETURN VALUES
An exit status of zero (0) means that the command ran successfully.
Any exit status other than zero (0) means that an error occurred.
If the administrative log function is enabled, the exit status is logged in the administrative daily log under the log directory:
UNIX systems: /usr/openv/netbackup/logs/admin
Windows systems: install_path\NetBackup\logs\admin
It has the following form:
bpplclients: EXIT status = exit status
If an error occurred, a diagnostic precedes this message.
FILES
UNIX systems:
/usr/openv/netbackup/logs/admin/* /usr/openv/NetBackup/db/policy/policy_name/clients
Windows systems:
install_path\netbackup\logs\admin\* install_path\NetBackup\db\policy\policy_name\clients
SEE ALSO
See bpplinfo.