Veritas NetBackup™ Appliance Commands Reference Guide
- Overview
- Appendix A. Main > Appliance commands
- Appendix B. Main > Manage > FibreChannel commands
- Appendix C. Main > Manage > HighAvailability commands
- Appendix D. Main > Manage > Libraries commands
- Appendix E. Main > Manage > Libraries > Advanced > ACS commands
- Manage > Libraries > Advanced > ACS > ACS_CSI_HOSTPORT
- Manage > Libraries > Advanced > ACS > ACS_SEL_SOCKET
- Manage > Libraries > Advanced > ACS > ACS_SSI_HOSTNAME
- Manage > Libraries > Advanced > ACS > ACS_SSI_INET_PORT
- Manage > Libraries > Advanced > ACS > ACS_SSI_SOCKET
- Manage > Libraries > Advanced > ACS > ACS_TCP_RPCSERVICE
- Manage > Libraries > Advanced > ACS > ACS_UDP_RPCSERVICE
- Manage > Libraries > Advanced > ACS > API_BARCODE_RULES
- Manage > Libraries > Advanced > ACS > TestACS
- Manage > Libraries > Advanced > ACS > ViewVMconf
- Appendix F. Main > Manage > License commands
- Appendix G. Main > Manage > MountPoints commands
- Appendix H. Main > Manage > NetBackup CLI commands
- Appendix I. Main > Manage > OpenStorage commands
- Appendix J. Main > Manage > Software commands
- Manage > Software > Cancel
- Manage > Software > Delete
- Manage > Software > Download
- Manage > Software > DownloadProgress
- Manage > Software > Firmware
- Manage > Software > Install
- Manage > Software > List
- Manage > Software > LiveUpdateClients
- Manage > Software > Readme
- Manage > Software > Rollback
- Manage > Software > Share
- Manage > Software > UpgradeStatus
- Appendix K. Main > Manage > Storage commands
- Appendix L. Main > Manage > Tapes commands
- Appendix M. Main > Manage > Certificates commands
- Appendix N. Main > Monitor commands
- Appendix O. Main > Network commands
- Network > Configure
- Network > Date
- Network > DNS
- Network > Gateway
- Network > Hostname
- Network > Hosts
- Network > IPv4
- Network > IPv6
- Network > LinkAggregation
- Network > NetStat
- Network > NTPServer
- Network > Ping
- Network > SetProperty
- Network > Show
- Network > TimeZone
- Network > TraceRoute
- Network > Unconfigure
- Network > VLAN
- Network > WANOptimization
- Appendix P. Main > Network > Security (IPsec) commands
- Appendix Q. Main > Reports commands
- Appendix R. Main > Settings commands
- Settings > Cloud
- Settings > Deduplication
- Settings > FibreTransport
- Settings > iSCSI > Initiator
- Settings > iSCSI > Interface
- Settings > iSCSI > Target
- Settings > LogForwarding
- Settings > LifeCycle
- Settings > LiveUpdateServer
- Settings > NetBackup
- Settings > Password
- Settings > Share
- Settings > SNMP polling
- Settings > Sysctl
- Settings > SystemLocale
- Appendix S. Main > Settings > Alerts commands
- Appendix T. Main > Settings > Notifications view commands
- Appendix U. Main > Settings > Security commands
- Appendix V. Main > Support commands
- Support > Checkpoint
- Support > Cleanup > RemoveShelfEntries
- Support > Cleanup > ResetDIMMErrors
- Support > Collect
- Support > DataCollect
- Support > Disk
- Support > Errors
- Support > FactoryReset
- Support > FibreTransport
- Support > InfraServices
- Support > iostat
- Support > IPMI
- Support > KillRemoteCall
- Support > Logs
- Support > Maintenance
- Support > Messages
- Support > NBDNA
- Support > nbperfchk
- Support > NBSU
- Support > Processes
- Support > RAID
- Support > Reboot
- Support > RecoverStorage
- Support > Service
- Support > ServiceAllowed
- Support > Show
- Support > Shutdown
- Support > Storage ClearReservations
- Support > Storage Reset
- Support > Storage SanityCheck
- Support > Test
About the commands under the Network view
From the Network administration view, you can perform the following operations:
Administer the network settings and link aggregation of the appliance.
Set the time zone and the system time.
Display the uptime statistics for the appliance.
The following table summarizes the commands that are available for you to use in the Network view.
Table: Main > Network view commands
Command | Explanation |
|---|---|
Configure | Configure the IPv4 or IPv6 address of a network interface with the default gateway. See Network > Configure . |
| Use to set or show the computer system time. See Network > Date. |
DNS | Configure the DNS information. See Network > DNS. |
Gateway | Add a new default gateway or delete an existing one for an interface. See Network > Gateway . |
Hostname | Set or get the host name of an appliance. See Network > Hostname . |
Hosts | Add or delete a host entry from the hosts' file or view the hosts configuration information. See Network > Hosts . |
IPv4 | Change the IPv4 address of a network interface. See Network > IPv4. |
IPv6 | Change the IPv6 address of a network interface. See Network > IPv6. |
LinkAggregation | LinkAggregation - The command provides you with the following commands options.
|
NetStat | Examine network statistical information. See Network > NetStat . |
NTPServer | Use this command to manage the NTP servers. You can add, delete, and show current NTP servers. See Network > NTPServer. |
Ping | An attempt to reach a host or IP address with ICMP ECHO_REQUESTs See Network > Ping . |
Security | Use the commands in this view to manage IPsec policies. |
SetProperty | Use to set the Ethernet interface property. |
Show | You can use this command to show the network properties. See Network > Show. |
Timezone | Use to set or reset the time zone. See Network > TimeZone. |
TraceRoute | Displays the network packet route. See Network > TraceRoute . |
Unconfigure | Removes the IP address and shuts down the interface. See Network > Unconfigure . |
VLAN | Manages VLAN operations The command provides you with the following options.
|
WANOptimization | Manages WANOptimization. |