Veritas NetBackup™ Status Codes Reference Guide
- NetBackup status codes
- NetBackup status codes
- NetBackup KMS status codes
- NetBackup status codes
- Media Manager status codes
- Media Manager status codes
- Media Manager status codes
- Device configuration status codes
- Device configuration status codes
- Device configuration status codes
- Device management status codes
- Device management status codes
- Device management status codes
- Robotic status codes
- Robotic status codes
- Robotic status codes
- Robotic error codes
- Robotic error codes
- Robotic error codes
- Security services status codes
- Security services status codes
- Security services status codes
NetBackup status code: 130
Explanation: An error occurred that prevents the product from operating in a consistent fashion. This error is usually related to a system call.
Recommended Action: Do the following, as appropriate:
Check the NetBackup Problems report for additional information about the error.
Check the system log for reported problems.
For detailed troubleshooting information, create bpdbm, bptm, and bprd debug log directories on the master server. Increase the unified logging level by using the vxlogcfg command.
See "About unified logging" in the NetBackup Logging Reference Guide.
Retry the operation and check the resulting debug logs.
If the policy validation fails, it is due to one of following reasons:
There is a certificate mismatch on the client. Remove the CloudPoint CA certificate from the following location and validate the policy again:
install_location/var/global/cloudpoint_certificates
The CloudPoint server is not accessible.
Click here to view technical notes and other information in the Veritas Knowledge Base about this status code.