请输入搜索词进行查询
搜索 <book_title>...
Veritas Access 安装指南
Last Published:
2018-05-28
Product(s):
Access (7.4)
Platform: Linux
- Veritas Access 简介
- Veritas Access 授权许可
- 系统要求
- 准备安装 Veritas Access
- 在 VMware ESXi 中部署用于安装 Veritas Access 的虚拟机
- 安装和配置群集
- 使用响应文件自动运行 Veritas Access 安装和配置
- 显示和添加群集节点
- 升级 Veritas Access和操作系统
- 使用滚动升级来升级 Veritas Access
- 卸载 Veritas Access
- 附录 A. 安装参考
- 附录 B. 配置安全 Shell 进行通信
- 附录 C. 手动部署 Veritas Access
选择专用 NIC
在群集中安装 Veritas Access 时,您可能希望将特定网络设备配置为专用接口。
选择专用 NIC
- 在手动选择模式下,输入 2 以选择专用 NIC。
NIC selection/NIC bonding/NIC VLAN configuration Common NICs on all systems: NIC Type Properties Public ==================================================== ens161 Physical - N ens192 Physical - Y (Selected) ens193 Physical - Y (Selected) ens224 Physical Slave of bond0 ens225 Physical Slave of bond0 ens256 Physical - N ens257 Physical - bond0 Virtual Bond balance-rr Y (Selected) ens192.100 Virtual VLAN 100 Y (Selected) 1) Select public NICs 2) Select private NICs 3) Exclude NICs 4) Include NICs 5) Create a new bond 6) Add NICs to a bond 7) Remove bonds 8) Remove NICs from the bond list 9) Create VLAN device 10) Delete VLAN device 11) Save and continue Select the NIC option to be configured in this cluster: [1-11,q] 2
- 选择要选为专用 NIC 的 NIC。
Choose NICs as private 1) ens161 2) ens192 3) ens193 4) ens256 5) Unselect previous private NICs b) Back to previous menu Choose items, separated by spaces: [1-5,b,q] 1 4 NIC selection/NIC bonding/NIC VLAN configuration Common NICs on all systems: NIC Type Properties Public ==================================================== ens161 Physical - N (Selected) ens192 Physical - Y (Selected) ens193 Physical - Y (Selected) ens224 Physical Slave of bond0 ens225 Physical Slave of bond0 ens256 Physical - N (Selected) ens257 Physical - bond0 Virtual Bond balance-rr Y (Selected) ens192.100 Virtual VLAN 100 Y (Selected) 1) Select public NICs 2) Select private NICs 3) Exclude NICs 4) Include NICs 5) Create a new bond 6) Add NICs to a bond 7) Remove bonds 8) Remove NICs from the bond list 9) Create VLAN device 10) Delete VLAN device 11) Save and continue Select the NIC option to be configured in this cluster: [1-11,q]
注意:
要开始配置群集,请在手动选择或配置公用和专用 NIC 后,输入 11,以选择 Save and continue 选项。