请输入搜索词进行查询
搜索 <book_title>...
Veritas Access 安装指南
Last Published:
2018-05-28
Product(s):
Access (7.4)
Platform: Linux
- Veritas Access 简介
- Veritas Access 授权许可
- 系统要求
- 准备安装 Veritas Access
- 在 VMware ESXi 中部署用于安装 Veritas Access 的虚拟机
- 安装和配置群集
- 使用响应文件自动运行 Veritas Access 安装和配置
- 显示和添加群集节点
- 升级 Veritas Access和操作系统
- 使用滚动升级来升级 Veritas Access
- 卸载 Veritas Access
- 附录 A. 安装参考
- 附录 B. 配置安全 Shell 进行通信
- 附录 C. 手动部署 Veritas Access
创建 NIC 绑定
管理员可在 Veritas Access 安装期间从给定的公用 NIC 接口列表创建绑定 NIC 接口。借助此功能,管理员可以节省大量用于安装和安装后绑定创建的物理 IP 地址。
无法绑定 InfiniBand NIC,因为它们的 PCI ID 都相同。
如果不希望创建绑定接口,请继续安装。
创建绑定
- 选择手动选择模式后,安装程序将提示您输入您的选择。输入 5 创建新绑定。
NIC selection/NIC bonding/NIC VLAN configuration Common NICs on all systems: NIC Type Properties Public ==================================================== ens161 Physical - N ens192 Physical - Y ens193 Physical - Y ens224 Physical - Y ens225 Physical - Y ens256 Physical - N ens257 Physical - Y 1) Select public NICs 2) Select private NICs 3) Exclude NICs 4) Include NICs 5) Create a new bond 6) Add NICs to a bond 7) Remove bonds 8) Remove NICs from the bond list 9) Create VLAN device 10) Delete VLAN device 11) Save and continue Select the NIC option to be configured in this cluster: [1-11,q] 5
- 为新绑定选择绑定模式。
Configure the mode of the NIC bonding: 1) balance-rr 2) active-backup 3) balance-xor 4) broadcast 5) 802.3ad 6) balance-tlb 7) balance-alb b) Back to previous menu Select the bonding mode: [1-7,b,q] 1 bond0 is created. Please add NICs to bond0 to enable it. Press [Enter] to continue:
如果选择 3 或 5,则需要为绑定模式选择绑定选项:
1) layer2 2) layer3+4 3) default Select the bonding option: [1-3,b,q] 1
安装程序将提示您选择要为群集配置的 NIC 选项。
- 输入 6 将 NIC 添加到绑定。
注意:
需要在绑定中添加 NIC。
NIC selection/NIC bonding/NIC VLAN configuration Common NICs on all systems: NIC Type Properties Public ==================================================== ens161 Physical - N ens192 Physical - Y ens193 Physical - Y ens224 Physical - Y ens225 Physical - Y ens256 Physical - N ens257 Physical - Y bond0 Virtual Bond balance-rr - 1) Select public NICs 2) Select private NICs 3) Exclude NICs 4) Include NICs 5) Create a new bond 6) Add NICs to a bond 7) Remove bonds 8) Remove NICs from the bond list 9) Create VLAN device 10) Delete VLAN device 11) Save and continue Select the NIC option to be configured in this cluster: [1-11,q] 6
- 输入 6 选择要在绑定中添加的 NIC。
Choose NICs for bonding 1) ens161 2) ens192 3) ens193 4) ens224 5) ens225 6) ens256 7) ens257 b) Back to previous menu Choose NICs, separated by spaces: [1-7,b,q,?] 4 5
- 选择要为其添加 NIC 的绑定名称
Choose a bond name to add NICs 1) bond0 b) Back to previous menu Choose bonds, separated by spaces: [1-1,b,q] 1 Adding ens224 ens225 to bond0 was successful Press [Enter] to continue: NIC selection/NIC bonding/NIC VLAN configuration Common NICs on all systems: NIC Type Properties Public ==================================================== ens161 Physical - N ens192 Physical - Y ens193 Physical - Y ens224 Physical Slave of bond0 ens225 Physical Slave of bond0 ens256 Physical - N ens257 Physical - Y bond0 Virtual Bond balance-rr Y 1) Select public NICs 2) Select private NICs 3) Exclude NICs 4) Include NICs 5) Create a new bond 6) Add NICs to a bond 7) Remove bonds 8) Remove NICs from the bond list 9) Create VLAN device 10) Delete VLAN device 11) Save and continue Select the NIC option to be configured in this cluster: [1-11,q]