Please enter search query.
Search <book_title>...
Veritas NetBackup™ 5240 Appliance Product Description
Last Published:
2021-11-08
Product(s):
Appliances (5240 3.0)
- About the NetBackup 5240 Appliance
- NetBackup Appliance overview
- Features and components of the NetBackup Appliance
- NetBackup Appliance front panel disk drive configurations
- NetBackup Appliance front panel USB port
- NetBackup Appliance control panel
- NetBackup Appliance rear panel
- NetBackup Appliance I/O configuration options
- NetBackup Appliance total I/O on-board and PCIe ports
- Customizable I/O configurations by slot for existing NetBackup Appliance installations
- Dual-port 10 Gb Ethernet card with SFP+ transceiver ports
- QLE8442 dual-port 10Gb Ethernet/iSCSI capable card with SFP+ modules
- QLE2562 dual-port 8Gb Fibre Channel host bus adapter with SFP+ modules
- SAS tape-out adapter
- NetBackup Appliance Network Interface Port locations and speeds
- NetBackup Appliance I/O configuration options
- About the Veritas 2U12 49TB Storage Shelf
- NetBackup 5240 Appliance and Veritas 2U12 49TB Storage Shelf cables
- Appendix A. Technical specifications and compliance standards
- NetBackup Appliance and Veritas 2U12 49TB Storage Shelf technical specifications
- Environmental specifications
- Protocol standards
- Regulatory, compliance, and certification information
- Index
Twinaxial copper cables
The NetBackup Appliance communicates with Ethernet networks that run the iSCSI protocol through high speed Twinaxial copper cables. If you configure the appliance to communicate with 10 Gb Ethernet iSCSI networks, these cables connect to the iSCSI card in the appliance.
These cables are also known as Direct-Access Copper (DAC) cables, and are available in 1-meter, 3-meter, or 5-meter lengths.
See Power cables.
See Multi-Mode fiber optic cable.
See SAS-3 cable.
See Network cable.