Veritas NetBackup™ Appliance Troubleshooting Guide

Last Published:
Product(s): Appliances (3.0)
  1. About using the Troubleshooting Guide
    1.  
      About this guide
    2.  
      About the intended audience
    3.  
      About contacting Technical Support
    4.  
      About troubleshooting the NetBackup Appliance
  2. Best practices
    1.  
      About best practices
    2.  
      Determining the NetBackup Appliance serial number
    3.  
      About Fibre Channel HBA card configuration verification
    4.  
      About Notification settings
    5.  
      About IPMI configuration
    6.  
      About password management and recovery
    7.  
      About IPv4-IPv6-based network support
    8.  
      About enabling BMR options
    9.  
      About deleting users
  3. About troubleshooting tools
    1.  
      Tools for troubleshooting the NetBackup Appliance
    2.  
      About hardware monitoring
    3.  
      Troubleshooting and tuning appliance from the Appliance Diagnostics Center
    4. About NetBackup support utilities
      1.  
        NetBackup Domain Network Analyzer (NBDNA)
      2.  
        NetBackup Support Utility (NBSU)
  4. Working with log files
    1.  
      About NetBackup Appliance log files
    2.  
      About the Collect Log files wizard
    3.  
      Viewing log files using the Support command
    4.  
      Where to find NetBackup Appliance log files using the Browse command
    5.  
      Gathering device logs with the DataCollect command
    6.  
      About gathering information for NetBackup-Java applications
    7.  
      Enabling and disabling VxMS logging
  5. Disaster recovery
    1.  
      About disaster recovery
    2.  
      Disaster recovery best practices
    3. Disaster recovery scenarios
      1. Appliance sustained power interruption
        1.  
          Restoring operation to a NetBackup Appliance following a power outage
        2.  
          Restoring operation to a NetBackup Appliance with external storage following a power outage
      2. Appliance hardware failure
        1.  
          Removing and replacing hardware components
        2.  
          Setting a NetBackup 5330 storage shelf component to the Service Allowed mode
      3.  
        Complete loss of appliance with recoverable operating system drives and attached storage disks
      4. Complete loss of appliance with recoverable attached storage disks
        1.  
          Reimaging a NetBackup appliance from the USB drive
        2.  
          Reconfiguring a 52xx master server appliance using the NetBackup Appliance Shell Menu
        3.  
          Configuring a master server to communicate with an appliance media server
        4.  
          Reconfiguring a 52xx or 5330 media server appliance using the NetBackup Appliance Shell Menu
        5.  
          About NIC1 (eth0) port usage on NetBackup appliances
      5.  
        Complete loss of appliance and attached storage disks
      6.  
        NetBackup Appliance software corruption
      7. NetBackup Appliance database corruption
        1.  
          Rollback to an appliance checkpoint from the appliance shell menu
        2.  
          About appliance rollback validation
      8. NetBackup Appliance catalog corruption
        1.  
          Starting a factory reset from the appliance shell menu
      9.  
        NetBackup Appliance operating system corruption
  6. NetBackup Appliance error messages
    1.  
      About NetBackup Appliance error messages
    2.  
      Error messages displayed during initial configuration
    3.  
      Error messages displayed on the NetBackup Appliance Web Console
    4.  
      Error messages displayed on the NetBackup Appliance Shell Menu
    5.  
      NetBackup status codes applicable for NetBackup Appliance

About enabling BMR options

You can now enable Bare Metal Restore (BMR) from Manage > Host > Advanced in the NetBackup Appliance Web Console when the appliance is configured as a master server. BMR is the server recovery option of NetBackup that automates and streamlines the server recovery process. Thus making it unnecessary to manually reinstall the operating systems or configure hardware. BMR allows the recovery of:

  • Windows systems to completely different hardware (Dissimilar System Recovery or DSR)

  • UNIX/Linux systems to disks of varying geometry (Dissimilar Disk Recovery or DDR)

For more information about the recovery process using BMR, refer to the BMR Administrator's Guide.

More Information

About best practices