Important Update: Cohesity Products Documentation
All Cohesity product documentation are now managed via the Cohesity Docs Portal: https://docs.cohesity.com/HomePage/Content/home.htm. Some documentation available here may not reflect the latest information or may no longer be accessible.
Veritas Access Appliance Command Reference Guide
- Overview
- Appendix A. Main > Appliance
- Appendix B. Main > Manage > Cluster
- Appendix C. Main > Manage > Software
- Appendix D. Main > Manage > Storage
- Appendix E. Main > Network
- Network > Configure
- Network > Date
- Network > DNS
- Network > Gateway
- Network > Hosts
- Network > IPv4
- Network > IPv6
- Network > SetProperty
- Network > Show
- Network > TimeZone
- Network > NetStat
- Network > NTPServer
- Network > Unconfigure
- Network > VLAN
- Network > TraceRoute
- Network > Ping
- Network > Hostname
- Network > Proxy
- Appendix F. Main > Monitor
- Appendix G. Main > Settings
- Appendix H. Main > Support
Name
Main > Network > Hostname — Set or show the hostname for the appliance node.
SYNOPSIS
Hostname Set Name
Hostname Show
DESCRIPTION
This command enables you to set or show the appliance node hostname.
OPTIONS
- Hostname Set Name
Set the host name.
The Name variable contains the short host name or the fully qualified domain name (FQDN) of the host.
Note:
The host name can only be set during an initial configuration on an appliance node. After the initial configuration has completed successfully, you can re-enter the initial configuration by performing a factory reset on the appliance.
- Show
Display the host name.