Veritas Access Installation Guide

CFG{bondmode}{bond<n>}

Defines the bond modes for BOND.

List or scalar: list

Optional or required: optional

CFG{bondname}

List of bond names for BOND.

List or scalar: list

Optional or required: optional

CFG{bondpool}{bond<n>}

List of the PCI IDs of the slave NICs.

List or scalar: list

Optional or required: optional

CFG{config_majority_based_fencing}

Enables majority fencing. The value is 1. It cannot be used with I/O fencing variables 'fencing_scsi3_disk_policy', 'fencing_newdg_disks', and 'fencing_dgname'.

List or scalar: scalar

Optional or required: required for majority-based fencing

CFG{exclusion}

List of PCI IDs of exlcluded NICs.

List or scalar: list

Optional or required: optional

CFG{fencing_dgname}

Specifies the disk group for I/O fencing. The value is sfscoorddg.

List or scalar: scalar

Optional or required: required for I/O fencing

CFG{fencing_newdg_disks}

Defines the fencing disks.

List or scalar: list

Optional or required: required for I/O fencing

CFG{fencing_option}

Specifies the I/O fencing configuration mode. The value is 2 for disk-based I/O fencing.

List or scalar: scalar

Optional or required: required for I/O fencing

CFG{fencing_scsi3_disk_policy}

Specifies the SCSI-3 disk policy to use I/O fencing. The value is dmp.

List or scalar: scalar

Optional or required: required for I/O fencing

CFG{fencingenabled}

Defines whether fencing is enabled. The value is 1 if enabled.

List or scalar: scalar

Optional or required: required for I/O fencing

CFG{opt}{licensefile}

Specifies the location of the Veritas perpetual or subscription license key file.

List or scalar: scalar

Optional or required: required

CFG{keys}{"node_ip"}

Specifies the Veritas Access license for each node.

List or scalar: scalar

Optional or required: required

CFG{newnodes}

Specifies the new access IP for the cluster nodes. The value should be the first public IP address for each node.

List or scalar: list

Optional or required: required

CFG{opt}{comcleanup}

Cleans up the ssh connection that is added by the installer after the configuration. The value is 1.

List or scalar: scalar

Optional or required: required

CFG{opt}{confignic}

Performs the NIC configuration with all the network variable values. The value is 1.

List or scalar: scalar

Optional or required: required

CFG{opt}{configure}

Performs the configuration if the packages are already installed.

List or scalar: scalar

Optional or required: required

CFG{opt}{install}

Installs Veritas Access RPMs. Configuration can be performed at a later time using the -configure option.

List or scalar: scalar

Optional or required: optional

CFG{opt}{installallpkgs}

Instructs the installer to install all the Veritas Access RPMs based on the variable that has the value set to 1.

List or scalar: scalar

Optional or required: required

CFG{opt}{noipc}

Disables the connection to SORT for updates check. The value is 0.

List or scalar: scalar

Optional or required: required

CFG{opt}{ssh}

Determines whether to use ssh for communication between systems. The value is 1 if enabled.

List or scalar: scalar

Optional or required: required

CFG{prod}

Defines the product to be installed or uninstalled.

List or scalar: scalar

Optional or required: required

CFG{publicbond}

List of PCI IDs of the bonded NICs.

List or scalar: list

Optional or required: optional

CFG{publicnetmaskarr}

List of netmasks that are assigned to public NICs or bonds.

List or scalar: list

Optional or required: required

CFG{publicparr}

List of public IPs that are assigned to public NICs or bonds.

List or scalar: list

Optional or required: required

CFG{redhat_subscription_username}

Specifies the user name to register with Red Hat subscription management.

List or scalar: scalar

Optional or required: required if some required OS rpms are missing on the systems

The user name should be enclosed in single quotes (for example : '1234@abc') if it contains any special character.

CFG{redhat_subscription_password}

Specifies the password to register with Red Hat subscription management.

List or scalar: scalar

Optional or required: required if some required OS rpms are missing on the systems

The password should be enclosed in single quotes (for example : '1234@abc') if it contains any special character.

CFG{snas_clustername}

Defines the cluster name of the product.

List or scalar: scalar

Optional or required: required

CFG{snas_consoleip}

Defines the console IP of the product.

List or scalar: scalar

Optional or required: required

CFG{snas_defgateway}

Defines the gateway of the product.

List or scalar: scalar

Optional or required: required

CFG{snas_dnsdomainname}

Defines the DNS domain name of the product.

List or scalar: scalar

Optional or required: required

CFG{snas_dnsip}

Defines the DNS IP of the product.

List or scalar: scalar

Optional or required: required

CFG{snas_ntpserver}

Defines the NTP server name of the product.

List or scalar: scalar

Optional or required: required

CFG{snas_nvip}

Defines the number of VIPs on each NIC.

List or scalar: scalar

Optional or required: required

CFG{snas_pipprefix}

Defines the prefix of public IPs (only in IPV6 environments).

List or scalar: scalar

Optional or required: required

CFG{snas_pipstart}

Defines the the initial IP of the public IPs.

List or scalar: scalar

Optional or required: required

CFG{snas_pnmaskstart}

Defines the netmask of public IPs (only in IPV4 environments).

List or scalar: scalar

Optional or required: required

CFG{snas_sepconsoleport}

Defines if use of separate console port. 1 for yes, 0 for no.

List or scalar: scalar

Optional or required: required

CFG{snas_vipprefix}

Defines the prefix of virtual IPs (only in IPV6 environments).

List or scalar: scalar

Optional or required: required

CFG{snas_vipstart}

Defines the the initial IP of the virtual IPs.

List or scalar: scalar

Optional or required: required

CFG{snas_vnmaskstart}

Defines the netmask of virtual IPs (only in IPV4 environments).

List or scalar: scalar

Optional or required: required

CFG{systems}

List of systems on which the product is to be installed or uninstalled.

List or scalar: list

Optional or required: required

CFG{vcs_allowcomms}

Indicates whether to start LLT or GAB when the user wants to set up a single node cluster.

List or scalar: scalar

Optional or required: required

CFG{vcs_clusterid}

Defines the unique cluser ID with a string number.

List or scalar: scalar

Optional or required: required

CFG{vcs_lltlink<n>}{"new_node_ip"}

Defines the NIC name for the first heartbeat link.

List or scalar: scalar

Optional or required: required

CFG{vcs_rdmalink1_address}{"new_node_ip"}

Specifies the RDMA private link1 IP address, the value follows that node_01 is 172.16.0.3, node_02 is 172.16.0.4, and so on.

List or scalar: scalar

Optional or required: required for RDMA NICs as private NICs

CFG{vcs_rdmalink1_netmask}{"new_node_ip"}

Specifies the RDMA private link1 IP netmask, the value is 255.255.255.0.

List or scalar: scalar

Optional or required: required for RDMA NICs as private NICs

CFG{vcs_rdmalink1_port}{"new_node_ip"}

Specifies the port number for the RDMA private link1, the value is 51001.

List or scalar: scalar

Optional or required: required for RDMA NICs as private NICs

CFG{vcs_rdmalink2_address}{"new_node_ip"}

Specifies the RDMA private link2 IP address, the value follows that node_01 is 172.16.1.3, node_02 is 172.16.1.4, and so on.

List or scalar: scalar

Optional or required: required for RDMA NICs as private NICs

CFG{vcs_rdmalink2_netmask}{"new_node_ip"}

Specifies the RDMA private link2 IP netmask, the value is 255.255.255.0.

List or scalar: scalar

Optional or required: required for RDMA NICs as private NICs

CFG{vcs_rdmalink2_port}{"new_node_ip"}

Specifies the port number for the RDMA private link2, the value is 51002.

List or scalar: scalar

Optional or required: required for RDMA NICs as private NICs

CFG{vcs_userenpw}

Defines the encrypted user password.

List or scalar: scalar

Optional or required: required

CFG{vcs_username}

Defines the added username for VCS.

List or scalar: scalar

Optional or required: required

CFG{vcs_userpriv}

Defines the user privilege.

List or scalar: scalar

Optional or required: required

CFG{virtualiparr}

List of virtual IPs that will be assigned to public NICs or bonds.

List or scalar: list

Optional or required: required

CFG{virtualnetmaskarr}

List of netmasks that will be assigned to public NICs or bonds.

List or scalar: list

Optional or required: required