NetBackup™ Web UI RHV Administrator's Guide

Last Published:
Product(s): NetBackup (8.2)
  1. Introducing the NetBackup web user interface
    1.  
      About the NetBackup web user interface
    2.  
      Terminology
    3.  
      Sign in to the NetBackup web UI
  2. Managing RHV servers
    1.  
      Quick configuration checklist to protect Red Hat Virtualization virtual machines
    2. Configuring secure communication between the Red Hat Virtualization server and NetBackup host
      1.  
        ECA_TRUST_STORE_PATH for NetBackup servers and clients
      2.  
        ECA_CRL_PATH for NetBackup servers and clients
      3.  
        VIRTUALIZATION_HOSTS_SECURE_CONNECT_ENABLED for servers and clients
      4.  
        VIRTUALIZATION_CRL_CHECK for NetBackup servers and clients
    3.  
      About the ports that NetBackup uses to communicate with RHV
    4. Add or browse an RHV manager
      1.  
        Adding a backup host to the NetBackup master server
      2.  
        Remove an RHV manager
    5.  
      Create an intelligent VM group
    6.  
      Remove an intelligent VM group
    7.  
      Setting global limits on the use of RHV resources
  3. Protecting RHV virtual machines
    1.  
      Things to know before you protect RHV virtual machines
    2.  
      Protect RHV VMs or intelligent VM groups
    3.  
      Remove protection from VMs or intelligent VM groups
    4.  
      View the protection status of VMs or intelligent VM groups
  4. Recovering RHV virtual machines
    1.  
      Things to consider before you recover the RHV virtual machines
    2.  
      About the pre-recovery check
    3.  
      Recover an RHV virtual machine
    4.  
      About the supported virtual disk formats and disk provisioning during VM recovery
  5. Troubleshooting RHV VM protection and recovery
    1.  
      Troubleshooting tips for NetBackup for RHV
    2.  
      Error run into during the RHV virtual machines discovery phase
    3.  
      Error run into while backing up RHV virtual machines
    4.  
      Error run into while restoring RHV virtual machines
  6. API and command line options for RHV
    1. Using APIs and command line options to manage, protect, or recover RHV virtual machines
      1.  
        Additional information about the rename file
    2. Additional NetBackup options for RHV configuration
      1.  
        OVIRT_IMAGEIO_INACTIVITY_TIMEOUT option for NetBackup servers
      2.  
        RHV_CREATEDISK_TIMEOUT option for NetBackup servers
      3.  
        RHV_AUTODISCOVERY_INTERVAL option for NetBackup servers

Remove protection from VMs or intelligent VM groups

You can unsubscribe VMs or intelligent VM groups from a protection plan. When the asset is unsubscribed, backups are no longer performed.

Note:

When you unsubscribe an asset from a protection plan, there is a possibility that the asset displays Classic policy in the web UI. This situation can happen when an asset is subscribed to a protection plan and a backup runs for that asset. Then the asset is unsubscribed from the protection plan while it has a valid backup image. The web UI displays Classic policy, but there may or may not be an active policy protecting the asset.

To remove protection from a VM or intelligent VM group

  1. On the left, click RHV.
  2. On the Virtual machines tab or Intelligent VM groups tab, select the VM or the intelligent VM group.

    • For a VM, scroll down and click Remove protection.

    • For an intelligent VM group, scroll down and click the lock symbol and then click Remove protection.

    Under Virtual machines or Intelligent VM groups, the asset is listed as Not protected.