Veritas NetBackup™ Commands Reference Guide

Last Published:
Product(s): NetBackup (8.1.2)
  1. Introduction
    1.  
      About NetBackup commands
    2.  
      Navigating multiple menu levels
    3.  
      NetBackup command conventions
    4.  
      NetBackup Media Manager command notes
    5.  
      IPV6 updates
    6.  
      Removal of nbexecute command
  2. Appendix A. NetBackup Commands
    1.  
      acsd
    2.  
      add_media_server_on_clients
    3.  
      backupdbtrace
    4.  
      backuptrace
    5.  
      bmrc
    6.  
      bmrconfig
    7.  
      bmrepadm
    8.  
      bmrprep
    9.  
      bmrs
    10.  
      bmrsrtadm
    11.  
      bp
    12.  
      bparchive
    13.  
      bpbackup
    14.  
      bpbackupdb
    15.  
      bpcatarc
    16.  
      bpcatlist
    17.  
      bpcatres
    18.  
      bpcatrm
    19.  
      bpcd
    20.  
      bpchangeprimary
    21.  
      bpclient
    22.  
      bpclimagelist
    23.  
      bpclntcmd
    24.  
      bpclusterutil
    25.  
      bpcompatd
    26.  
      bpconfig
    27.  
      bpdbjobs
    28.  
      bpdbm
    29.  
      bpdgclone
    30.  
      bpdown
    31.  
      bpduplicate
    32.  
      bperror
    33.  
      bpexpdate
    34.  
      bpfis
    35.  
      bpflist
    36.  
      bpgetconfig
    37.  
      bpgetdebuglog
    38.  
      bpimage
    39.  
      bpimagelist
    40.  
      bpimmedia
    41.  
      bpimport
    42.  
      bpinst
    43.  
      bpkeyfile
    44.  
      bpkeyutil
    45.  
      bplabel
    46.  
      bplist
    47.  
      bpmedia
    48.  
      bpmedialist
    49.  
      bpminlicense
    50.  
      bpnbat
    51.  
      bpnbaz
    52.  
      bppficorr
    53.  
      bpplcatdrinfo
    54.  
      bpplclients
    55.  
      bppldelete
    56.  
      bpplinclude
    57.  
      bpplinfo
    58.  
      bppllist
    59.  
      bpplsched
    60.  
      bpplschedrep
    61.  
      bpplschedwin
    62.  
      bppolicynew
    63.  
      bpps
    64.  
      bprd
    65.  
      bprecover
    66.  
      bprestore
    67.  
      bpretlevel
    68.  
      bpschedule
    69.  
      bpschedulerep
    70.  
      bpsetconfig
    71.  
      bpstsinfo
    72.  
      bpstuadd
    73.  
      bpstudel
    74.  
      bpstulist
    75.  
      bpsturep
    76.  
      bptestbpcd
    77.  
      bptestnetconn
    78.  
      bptpcinfo
    79.  
      bpup
    80.  
      bpverify
    81.  
      cat_convert
    82.  
      cat_export
    83.  
      cat_import
    84.  
      configurePorts
    85.  
      configureTPCerts
    86.  
      create_nbdb
    87.  
      csconfig cldinstance
    88.  
      csconfig cldprovider
    89.  
      csconfig meter
    90.  
      csconfig throttle
    91.  
      duplicatetrace
    92.  
      importtrace
    93.  
      jbpSA
    94.  
      jnbSA
    95.  
      ltid
    96.  
      manageClientCerts
    97.  
      mklogdir
    98.  
      nbauditreport
    99.  
      nbcatsync
    100.  
      NBCC
    101.  
      NBCCR
    102.  
      nbcertcmd
    103.  
      nbcertupdater
    104.  
      nbcldutil
    105.  
      nbcloudrestore
    106.  
      nbcomponentupdate
    107.  
      nbcplogs
    108.  
      nbdb_admin
    109.  
      nbdb_backup
    110.  
      nbdb_move
    111.  
      nbdb_ping
    112.  
      nbdb_restore
    113.  
      nbdb_unload
    114.  
      nbdbms_start_server
    115.  
      nbdbms_start_stop
    116.  
      nbdc
    117.  
      nbdecommission
    118.  
      nbdelete
    119.  
      nbdeployutil
    120.  
      nbdevconfig
    121.  
      nbdevquery
    122.  
      nbdiscover
    123.  
      nbdna
    124.  
      nbemm
    125.  
      nbemmcmd
    126.  
      nbfindfile
    127.  
      nbfirescan
    128.  
      nbftadm
    129.  
      nbftconfig
    130.  
      nbgetconfig
    131.  
      nbhba
    132.  
      nbholdutil
    133.  
      nbhostidentity
    134.  
      nbhostmgmt
    135.  
      nbhypervtool
    136.  
      nbinstallcmd
    137.  
      nbjm
    138.  
      nbkmsutil
    139.  
      nboraadm
    140.  
      nborair
    141.  
      nbpem
    142.  
      nbpemreq
    143.  
      nbperfchk
    144.  
      nbplupgrade
    145.  
      nbrb
    146.  
      nbrbutil
    147.  
      nbregopsc
    148.  
      nbreplicate
    149.  
      nbrepo
    150.  
      nbrestorevm
    151.  
      nbseccmd
    152.  
      nbsetconfig
    153.  
      nbsnapimport
    154.  
      nbsnapreplicate
    155.  
      nbsqladm
    156.  
      nbstl
    157.  
      nbstlutil
    158.  
      nbstop
    159.  
      nbsu
    160.  
      nbsvrgrp
    161.  
      resilient_clients
    162.  
      restoretrace
    163.  
      stopltid
    164.  
      tl4d
    165.  
      tl8d
    166.  
      tl8cd
    167.  
      tldd
    168.  
      tldcd
    169.  
      tlhd
    170.  
      tlhcd
    171.  
      tlmd
    172.  
      tpautoconf
    173.  
      tpclean
    174.  
      tpconfig
    175.  
      tpext
    176.  
      tpreq
    177.  
      tpunmount
    178.  
      verifytrace
    179.  
      vltadm
    180.  
      vltcontainers
    181.  
      vlteject
    182.  
      vltinject
    183.  
      vltoffsitemedia
    184.  
      vltopmenu
    185.  
      vltrun
    186.  
      vmadd
    187.  
      vmchange
    188.  
      vmcheckxxx
    189.  
      vmd
    190.  
      vmdelete
    191.  
      vmoprcmd
    192.  
      vmphyinv
    193.  
      vmpool
    194.  
      vmquery
    195.  
      vmrule
    196.  
      vmupdate
    197.  
      vnetd
    198.  
      vssat
    199.  
      vwcp_manage
    200.  
      vxlogcfg
    201.  
      vxlogmgr
    202.  
      vxlogview
    203.  
      W2KOption

Name

nbemmcmd — update and view information in the EMM database

SYNOPSIS

nbemmcmd [-addhost] [-changesetting] [-deletehost] [-errorsdb] [-getemmserver] [-help] [-listhosts] [-listmedia] [-listsettings] [-machinealias] [-renamehost] [-resethost] [-servercontrol] [-setemmserver] [-updatehost]

nbemmcmd -addhost [-activenodename string] [-brief] [-clustername string] [-displayname string] [-machinedescription string] -machinename string -machinetype api | app_cluster | cluster | master | media | ndmp [-masterserver string] [-netbackupversion level[.major_level[minor_level]]] [-operatingsystem hpux | linux | rs6000 | solaris | windows] [-scanability unsigned_integer]

nbemmcmd -changesetting -machinename string [-ALLOW_MULTIPLE_RETENTIONS_PER_MEDIA 0|1|no|yes] [-AUDIT DISABLED | ENABLED] [-AUDIT_ RETENTION_PERIOD number_of_days] [-COMMON_SERVER_FOR_DUP default | preferred | required] [-DISABLE_AUTOMATIC_HOST_NAME_ADD 0|1|no|yes] [-DISABLE_BACKUPS_SPANNING_DISK 0|1|no|yes] [-DISABLE_DISK_STU_JOB_THROTTLING 0|1|no|yes] [-DISABLE_STANDALONE_DRIVE_EXTENSIONS 0|1|no|yes] [-DISALLOW_NONNDMP_ON_NDMP_DRIVE 0|1|no|yes] [-DO_NOT_EJECT_STANDALONE 0|1|no|yes] [-DONT_USE_SLAVE 0|1|no|yes] [-DRIVE_ERROR_THRESHOLD unsigned_integer] [-DRIVE_NAME_SEED 0|1|no|yes] [-emmname string] [-emmport unsigned_integer] [-MAX_REALLOC_TRIES unsigned_integer] [-MEDIA_ERROR_THRESHOLD unsigned_integer] [-MEDIA_REQUEST_DELAY unsigned_integer] [-MPMS_DISABLE_EVENTS 0|1|no|yes] [-MPMS_DISABLE_RANK unsigned_integer] [-MUST_USE_LOCAL_DRIVE 0|1|no|yes] [-NBUFS_DESTINATION_DSU string] [-NBUFS_DUP_TSU_TO_DSU 0|1|no|yes] [-NBUFS_RETENTION_LEVEL unsigned_integer] [-NON_ROBOTIC_MEDIA_ID_PREFIX string] [-PREFER_NDMP_PATH_FOR_RESTORE 0|1|no|yes] [-RETURN_UNASSIGNED_MEDIA_TO_SCRATCH_POOL 0|1|no|yes] [-SCSI_PROTECTION NONE | SPR | SR] [-SHAREDISK_MOUNT_POINT string] [-TIME_WINDOW unsigned_integer] [-UNRESTRICTED_SHARING 0|1|no|yes] [-USE_POTENTIAL_FREESPACE_FOR_ALLOCATION 0|1|no|yes] [-VALIDATE_HOST_NAME 0|1|no|yes] [-VAULT_CLEAR_MEDIA_DESC 0|1|no|yes]

nbemmcmd -deletealldevices [-allrecords] | [-machinename string] | [-machinetype api | app_cluster | appliance | client | cluster | disk_array | foreign_media | master | media | nbwss_endpoint | ndmp | remote_master | replication_host | virtual_machine] [-emmname string] [-emmport unsigned_integer]

nbemmcmd -deletehost [-brief] -machinename string -machinetype api | app_cluster | cluster | master | media | ndmp | master | media | ndmp-mediaid string

nbemmcmd -errorsdb [-brief] [-prune [-days no_of_days] [-hours no_of_hours] [-minutes no_of_minutes]]

nbemmcmd -getemmserver [-masterserver string] [-timeout unsigned_integer]

nbemmcmd -listhosts [-brief] [-verbose] [-parsable] [-list_snap_vault_filers -machinename string] [-list_snap_vault_media_servers -masterserver string] [-list_sts_hosts -machinename string] [-list_sts_media_servers -masterserver string] [-list_app_clusters -masterserver string] [-servers_in_emm_cluster -clustername string] [-servers_in_app_cluster -clustername string] [-nbservers [-masterserver string]] [-display_server -machinename string -machinetype string] [-netbackupversion level[.major_level[minor_level]]]

nbemmcmd -listmedia [-allrecords] [-mediaid string] [-mediatype unsigned_integer] [-poolname string] [-robotnumber unsigned integer] [-vaultcontainer string]

nbemmcmd -listsettings -machinename string [-brief] [-emmname string] [-emmport unsigned_integer]

nbemmcmd -machinealias [-addalias -alias string -machinename string] [-deletealias -alias string] [-deleteallaliases -machinename string] [-getaliases -machinename string] -machinetype api | app_cluster | cluster | master | media | ndmp

nbemmcmd -releasecache -machinename string [-brief] [-emmname string] [-emmport unsigned_integer]

nbemmcmd -renamehost [-brief] -machinename string -machinetype api | app_cluster | cluster | master | media | ndmp -newmachinename string

nbemmcmd -resethost -machinename string

nbemmcmd -servercontrol [-brief] [-resume] [-suspend]

nbemmcmd -setemmserver [-brief] -emmservername string [-masterserver string] -newemmservername string [-timeout unsigned_integer]

nbemmcmd -updatehost [-activenodename string] [-add_server_to_app_cluster] [-brief] [-clustername string] [-delete_server_from_app_cluster] [-displayname string] [-machinedescription string] -machinename string [-machinestateop clr_admin_pause | clr_admin_pause_and_set_active | clr_disk_active | clr_ltid_restart | clr_master_server_connectivity | clr_tape_active | reset_all | set_admin_pause | set_disk_active | set_master_server_connectivity | set_tape_active] [-machinetype pi | app_cluster | cluster | master | media | ndmp] [-masterserver string] [-netbackupversion level[.major_level[minor_level]]] [-operatingsystem hpux | linux | rs6000 | solaris | windows]

On UNIX systems, the directory path to this command is /usr/openv/netbackup/bin/admincmd/

On Windows systems, the directory path to this command is install_path\NetBackup\bin\admincmd\

DESCRIPTION

The nbemmcmd command enables users to update a limited set of EMM database information. In addition, this command enables you to manage host entries, configuration options, and other miscellaneous items in the EMM database.

OPTIONS

The following commands contain a variety of options that enable you to manage the EMM database. The names of the options are purposely long to provide the user with a better understanding of how the options are to be used. Because of the option name length, you need only type the first letter or letters of the command that make it a unique option. For example, to use the -changesetting option, type -c because no other command option starts with the letter c.

-addhost

This option adds the specified host to the EMM database. The following entries can be adjusted by using this command option:

-activenodename string

Identifies the active node in a cluster.

-brief

Makes the output of the command less verbose.

-clustername string

Identifies the cluster to which this computer belongs.

-displayname string

Sets the display name of the computer.

-machinedescription string

Describes the computer or system being used.

-machinename string

Specifies the name of the computer to be updated.

-machinetype api | app_cluster | cluster | master | media | ndmp

Defines how the computer is used.

-masterserver string

Defines the host master server in a particular domain.

-netbackupversion level[.major_level[minor_level]]

Specifies the version that the added host is running. The level variable has a range of 0-99. The major_level and minor_level variables are optional single-digit fields. No spaces are allowed between the major_level and minor_level variables.

For example, enter the following information to specify NetBackup 7.0:

-netbackupversion 7.0 or -netbackupversion 7
-operatingsystem hpux | linux | rs6000 | solaris | windows

Adds a host with a designated operating system.

-scanability unsigned_integer

This option applies only to NetBackup Enterprise Servers that use the Shared Storage Option (SSO) feature.

A scan ability factor can range from zero to 9, with a default value of 5. This factor allows the assignment of scan hosts to be prioritized if a drive's scan host changes. Scan hosts with higher scan ability factors are chosen first.

Caution:

A drive is unavailable for use until a scan host can be assigned to it. If all hosts that register for a particular drive use scan_factor = 0, the drive is unusable. The drive remains unusable until a host with a non-zero scan_factor registers for the drive. If all hosts with a non-zero scan_factor have the drive DOWN, then again the drive becomes unavailable.

The decision to use a scan_factor of zero for a server reduces the level of resiliency in your SSO configuration. Be aware of the servers that can be a scan host for a drive. If a drive loses a scan host, it makes the drive unavailable to any server.

-changesetting -machinename string

Changes the configuration setting for a specified host and adds the settings that did not previously exist.

To change these configuration options, use -changesetting with the option name and the enable designator (1 or yes) or the disable designator (0 or no). For example, the following command disables the ability of EMM to add a host name automatically:

# nbemmcmd -changesetting -DISABLE_AUTOMATIC_HOST_NAME_ADD no
-ALLOW_MULTIPLE_RETENTIONS_PER_MEDIA 0 | 1 | no | yes

Allows NetBackup to mix retention levels on media. The default condition is that each volume can contain backups of only a single retention level.

-AUDIT [DISABLED | ENABLED]

Enables and disables NetBackup auditing. An audit trail is a record of user-initiated actions in a NetBackup environment. Auditing gathers and records the information to help answer who changed what and when they changed it. The default condition is audit enabled.

-AUDIT_RETENTION_PERIOD number_of_days

Specifies the number of days that user actions are to be retained for the audit report. If no retention period is indicated, the default audit retention period is 90 days. A value of 0 (zero) indicates that the records are never purged.

-COMMON_SERVER_FOR_DUP default | preferred | required

Determines how NetBackup finds the desired media server(s) to duplicate the data.

The media server that is used to read the image is the 'read media server'. The media server that is used to write the image is the 'write media server'. By default, when the source image is on a tape device, the read media server is the one that writes the backup image. Also, when the source image is on a disk pool with multiple media servers, any of those media servers can be the read media server. The choice for the write media server is limited to those that have access to the storage unit or storage unit group specified as the destination of the duplication operation.

The following are the possible settings of this option:

  • Default. NetBackup does not perform an exhaustive search for possible common servers (same read and write media server). If the common media servers are busy or unavailable, NetBackup uses a different write media server than the read media server. Use this option when you don't want an exhaustive search to affect the performance of the Resource Broker. This scenario can occur when a large job queue with duplication jobs waits for resources to become available.

  • Preferred. Look for a common media server to use. If one or more common media servers are found, but their resources (for example, DSUs or tape drives) are busy, do the following: Run the duplication job anyway by using two separate media servers (sending images over the network).

  • Required. NetBackup makes an exhaustive search to find a common server. If the common media servers are busy, NetBackup queues the resource request and waits for the resources to become available. NetBackup runs the job with two separate media servers, sending the images over the network, if the following is true: No common servers are in the NetBackup domain, or if a common server exists but is down.

-DISABLE_AUTOMATIC_HOST_NAME_ADD 0|1|no|yes

Disables the ability of EMM to add a host name automatically if it appears to be valid. An example of an invalid host name is a name that duplicates another host.

-DISABLE_BACKUPS_SPANNING_DISK 0|1|no|yes

Disables the ability of a backup operation to disk to continue when a file system full condition occurs on a disk storage unit volume. It disables by using image fragments on multiple storage unit volumes.

-DISABLE_DISK_STU_JOB_THROTTLING 0|1|no|yes

Disables the disk storage unit job throttle action that occurs when disk storage units approach their high-water mark. Disk storage unit throttling limits the number of jobs that are started simultaneously to approach the high-water mark more accurately. Default: Throttle disk storage units that approach their high-water mark.

-DISABLE_STANDALONE_DRIVE_EXTENSIONS 0|1|no|yes

Disables the non-robotic drive operations. During a backup, NetBackup does not automatically try to use whatever labeled or unlabeled media it finds in a non-robotic drive. Default condition is that standalone drive extensions are enabled.

-DISALLOW_NONNDMP_ON_NDMP_DRIVE 0|1|no|yes

The MDS logic on the EMM server reads this option. NetBackup tries to use an available drive that is based on the type of request as follows:

For a non-NDMP request of any kind, NetBackup tries to find an available non-NDMP drive. If a non-NDMP drive is not available and an NDMP drive is available, the slower NDMP drive is used. Non-NDMP requests include all type of requests apart from storage unit-related requests (backups and write side of duplicates) and NDMP image restores.

-DO_NOT_EJECT_STANDALONE 0|1|no|yes

If this entry is enabled, tapes in standalone drives are not ejected when a backup has completed on that host. (Tapes are ejected if end-of-media is reached during a backup.) Use when you want to keep a standalone drive ready after successful backups are performed.

-DONT_USE_SLAVE 0|1|no|yes

Deselects the use of drive name rules to assign names to drives automatically.

-DRIVE_ERROR_THRESHOLD unsigned_integer

Changes the threshold or number of drive errors that can occur before NetBackup changes the drive state to DOWN. Default: 2.

-DRIVE_NAME_SEED 0|1|no|yes

Selects the use of drive name rules to assign names to drives automatically.

-emmname string

Specifies the name of the EMM database server. This server contains the database that stores the media information and device configuration information.

-emmport unsigned_integer

Specifies the EMM port.

-machinename string

Names the computer whose settings are changed.

-MAX_REALLOC_TRIES unsigned_integer

Specifies the maximum number of tries that NetBackup attempts to reallocate the media for future backups.

-MEDIA_ERROR_THRESHOLD unsigned_integer

Changes the threshold or number of media errors that can occur before the media is frozen. Default: 2.

-MEDIA_REQUEST_DELAY unsigned_integer

Specifies the number of seconds that NetBackup waits for a drive to become ready. Applies only to non-robotic drives. Default: 0 seconds. For example, assume that the delay is 150 seconds:

MEDIA_REQUEST_DELAY = 150

Add this information to the bp.conf file on NetBackup servers or enter a value for Media Request Delay in the Media host properties.

-MPMS_DISABLE_EVENTS 0|1|no|yes, -MPMS_DISABLE_RANK 0|1|no|yes, -MUST_USE_LOCAL_DRIVE 0|1|no|yes

If the client is also a master server and this option is active, backups for this client must occur on a local drive. If the client is not a master server, this entry has no effect.

Add this option to the bp.conf file on master servers. Or check the Must Use Local Drive setting in the General Server host properties dialog box.

-NBUFS_DESTINATION_DSU string, -NBUFS_DUP_TSU_TO_DSU 0|1|no|yes, -NBUFS_RETENTION_LEVEL unsigned_integer, -NON_ROBOTIC_MEDIA_ID_PREFIX string

Specifies the media ID prefix that is used for creating non-robotic media. It applies to the host that the -machinename option specifies. The media ID prefix is an alphanumeric string of characters from one to three characters in length.

-PREFER_NDMP_PATH_FOR_RESTORE 0|1|no|yes, -RETURN_UNASSIGNED_MEDIA_TO_SCRATCH_POOL 0|1|no|yes

This EMM global option applies to every host that uses the EMM server. It is not a host option.

YES: The Media Manager automatically returns the expired and unassigned media that originated in the scratch volume pool to the scratch volume pool.

NO: Disables the automatic behavior of returning media to the scratch pool. Use one of the Media Manager administration interfaces to move media.

-SCSI_PROTECTION NONE | SPR | SR

Allows the exclusive access protection for tape drives. With access protection, other host bus adaptors cannot issue commands to control the drives during the reservation. The three possible settings for this option are:

NONE - No protection

SPR - SCSI persistent reserve

SR - SPC-2 SCSI reserve (default condition)

-TIME_WINDOW unsigned_integer

Enables you to set a value that is equal to the amount of time in which errors can be tracked. You can use this value with an error threshold (for example, media_error_threshold) to monitor the number of media errors that occur within the time window. The default setting is 12 hours.

-UNRESTRICTED_SHARING 0|1|no|yes

Enables the unrestricted media sharing for all media servers.

USE_POTENTIAL_FREESPACE_FOR_ALLOCATION 0|1|no|yes

Allows the memory allocation of the available free space. The High Water Mark normally triggers image cleanup on BasicDisk storage units and disk pools. When the High water mark is reached in a storage lifecycle policy, it can prevent the use of any more memory space.

For example, the High water mark is 90%, but the potential free space is 50%. When the free space that is left on disk is only available past the High water mark, the backup fails. Turn on this parameter (1) to allow the use of the 40% free space between the potential free space and the High water mark.

The default setting is no (0).

-VALIDATE_HOST_NAME 0|1|no|yes

Enables the host name character validation according to NetBackup standard. If this option is disabled, you can use a name like "_host1", which does not follow the standard.

-VAULT_CLEAR_MEDIA_DESC 0|1|no|yes

This option is an EMM global option that applies to every host that uses the EMM server. It is not a host option. When NetBackup media is returned from the off-site vault during a typical tape rotation, it is expired and is ready for reuse by new backups. To avoid confusion, it may be helpful to clear the old media description information when an expired tape is returned to the robot. If this entry is specified, the media description field is cleared when other Vault information is cleared from the Media Manager volume database.

-deletealldevices

Deletes all tape devices.

-allrecords

Deletes all tape devices across all computers. You cannot use this option with the -machinename option.

-emmname string

Name of the EMM server.

-emmport unsigned_integer

Port number for the EMM server

-machinename string

Deletes all tape devices that are attached to the specified media server. You cannot use this option with the -allrecords option.

-machinetype api | app_cluster | appliance | client | cluster | disk_array | foreign_media | master | media | nbwss_endpoint | ndmp | remote_master | replication_host | virtual_machine

Specifies the type of the computer name. You cannot use this option with the -allrecords option.

-deletehost

Deletes an EMM computer record by using the required computer name and computer type.

-brief

Generates a less verbose output of the command.

-machinename string

Removes the specified host from the EMM database.

-Machinetype api | app_cluster | cluster | master | media | ndmp

Identifies by type the computer to be removed.

-errorsdb
-brief

Generates a less verbose output of the command.

-prune [-days no_of_days] [-hours no_of_hours] [-minutes no_of_minutes]

Removes the entries from the error database. The optional days, hours, and minutes arguments determine which database entries to delete. It removes any entries older than the specified time.

-getemmserver

Displays the information on all the hosts in a particular EMM domain. Use this command to ensure a level of consistency in a newly installed domain or modified domain.

-brief

Generates a less verbose output of the command.

-masterserver string

Specifies a name of a master server for an EMM domain. If you omit this option when you use this command, the current computer is assumed.

-timeout unsigned integer

Specifies a temporary timeout value in seconds to be used during the duration of this command.

-help

Displays usage information for the specified command by entering the following:

nbemmcmd -help command
-listhosts

This option dumps the table structure for each known host.

-display_server -machinename string -machinetype string

Displays only the specified computer by the computer name and computer type.

-list_app_clusters -masterserver string

Lists all of the application clusters of the specified master server.

-list_snap_vault_filers -machinename string

Lists all of the SnapVault filers of the specified computer name See the -machinename option description that follows.

-list_snap_vault_media_servers -masterserver string

Lists all of the SnapVault media servers of the specified master server.

-list_sts_hosts -machinename string

Lists all OpenStorage hosts connected to the specified computer name.

-list_sts_media_servers -masterserver string

Lists all OpenStorage media servers that are connected to the specified master server.

-machinename api | app_cluster | cluster | master | media | ndmp

Defines the type of computer to list.

-nbservers -masterserver string

Displays only the media servers and master servers. The default for -listhosts is to display all servers.

-netbackupversion level[.major_level[minor_level]]

Specifies the computer version. The level variable has a range of 0-99. The major_level and minor_level variables are optional single-digit fields. There should be no spaces between major_level and minor_level.

For example, enter the following information to specify NetBackup 7.0:

-netbackupversion 7.0 or -netbackupversion 7
-servers_in_emm_cluster -clustername string

Lists all servers in the specified cluster.

-server_in_app_cluster -clustername string

Lists all of the application cluster servers of the specified cluster.

-brief

Makes the output of the command less verbose.

-parsable

Makes the output of the command parsable.

-verbose

Controls how host information is displayed. Multiple lines of output are printed, one for each parameter of a host.

-listmedia
-allrecords

Displays all media records.

-mediaid string

Specifies the media ID of the EMM media record.

-mediatype unsigned integer

Queries the volumes by media type.

Valid media types for NetBackup Enterprise Server are:

4mm, 8mm, 8mm2, 8mm3, dlt, dlt2, dlt3, dtf, hcart, hcart2, hcart3, qcart, 4mm_clean, 8mm_clean, 8mm2_clean, 8mm3_clean, dlt_clean, dlt2_clean, dlt3_clean, dtf_clean, hcart_clean, hcart2_clean, hcart3_clean.

Valid media types for a NetBackup server are:

4mm, 8mm, dlt, hcart, qcart, 4mm_clean, 8mm_clean, dlt_clean, hcart_clean.

-poolname string

Queries the volumes by pool number, an index into the volume pool. Use vmpool -listall to determine the index for a given pool name.

-robotnumber unsigned_integer

Queries the volumes by robot number. A robot number is a unique, logical identification number for the robot where the volume is located.

-vaultcontainer string

Lists the volumes that are stored in the container. The string variable is the vault_container_id, a string of up to 29 alphanumeric characters.

-listsettings
-machinename string

Specifies which computer to list settings for.

-brief

Generates a less verbose output of the command.

-emmname string

Specifies the host name of the pertinent EMM server. If -emmname is not specified, the default name is located in the bp.conf file.

-emmport unsigned_integer

Specifies the port number of the EMM server to where calls are made. If -emmport is not specified, the default port is specified in the bp.conf file.

-machinealias

The following parameters are used to maintain the alias list for a particular computer. Use them to view current aliases, add new aliases, or delete current aliases for an identified computer.

-addalias -alias alias -machinename name -machinetype type

Adds an alias name to a computer. Identify the computer name that is to receive the alias as well as the computer type.

For example, to create a media server with the alias name blue, use the following command:

machinealias -machinename 10.10.10.1 -machinetype media 
-addalias -alias blue
-deletealias -alias name -machinetype type

Deletes an alias name from the database. This operation requires that you identify the alias to be deleted by using the -alias string command and computer type with this option.

-deleteallaliases -alias name -machinetype type

Deletes all aliases for a particular computer. To perform this operation you must identify the computer name and the computer type.

-getaliases

Retrieves all aliases for a particular computer. To perform this operation you must identify the computer name and the computer type.

-alias string

Specifies the string that identifies the alias name of a computer.

-machinename string

Specifies the name of a computer.

-Machinetype api | app_cluster | cluster | master | media | ndmp

Defines what the computer is used as.

-releasecache

Release cache memory that the EMM server has used.

-brief

Generates a less verbose output of the command.

-emmname string

Specifies the host name of the pertinent EMM server. If -emmname is not specified, the default name is located in the bp.conf file.

-emmport unsigned_integer

Specifies the port number of the EMM server to where calls are made. If -emmport is not specified, the default port is specified in the bp.conf file.

-renamehost

This command, with the required computer name and new computer name options, renames the current computer name to a new computer name.

-machinename string

Defines the current computer name.

-newmachinename string

Defines the new computer name.

-resethost

Use this command to reset the Host Properties for an updated host. The Host Properties section displays the additional information that the host web service collects.

Run this command if you have downgraded the NetBackup version on a computer or removed a host from your NetBackup environment. You only need to run this command if you downgrade to NetBackup 8.0 or earlier. You may need to restart the NetBackup Administration Console for the changes to take effect.

Before you run the nbemmcmd - resethost command, you must run the bpnbat -login -loginType WEB command. This command authenticates your web services login. After you successfully run the bpnbat command, run the nbemmcmd - resethost command.

-machinename string

Defines the name of the computer that was downgraded or removed from the NetBackup environment.

-servercontrol

This command suspends and resumes control of a specified server. You can perform database maintenance without the corruption of existing data because a job began to run during this time.

-resume

Resumes the control of a specified server.

-suspend

Suspends the control of a specified server.

-setemmserver

This command changes the EMM server name for certain hosts in the domain whose name matches the old EMM server name. This command has the following options:

-emmservername string

Specifies the EMM server name to be changed.

-newemmservername string

Specifies the new, or replacement, value for the EMM server.

-masterserver string

Specifies a name of a master server for an EMM domain. If you omit this option when you use this command, the current computer is assumed.

-timeout unsigned integer

Specifies a temporary timeout value in seconds to use for the duration of this command.

-updatehost -machinename string

This command, when used with the following options, enables you to change a computer record that was specified by using the required -machinename option.

-add_server_to_app_cluster

This option designates that the computer should be added to the application cluster that is specified in the -clustername option.

-activenodename string

Identifies the active node in a cluster.

-clustername string

Identifies a cluster to which this computer belongs.

-delete_server_from_app_cluster

Designates that the computer should be removed from the application cluster that is specified in the -clustername option.

-displayname string

Displays the assigned name of a computer that is equivalent to the numbered identifier for that computer.

-machinename string

Specifies the computer name to update.

-machinestateop clr_admin_pause | clr_admin_pause_and_set_active | clr_disk_active | clr_ltid_restart | clr_master_server_connectivity | clr_tape_active | reset_all | set_admin_pause | set_disk_active | set_master_server_connectivity | set_tape_active

Sets or clears the specified computer state.

-Machinetype api | app_cluster |cluster | master | media | ndmp

Defines what the computer is used as.

-masterserver string

Defines the host's master server in the domain.

-netbackupversion level[.major_level[minor_level]]

Adds a host and specifies the version it is running. The level variable as a range of 0-99. The major_level and minor_level variables are optional single-digit fields. There should be no spaces between the major_level and minor_level variables.

For example, enter the following to specify NetBackup 7.0: -netbackupversion 7.0

-operatingsystem hpux | linux | rs6000 | solaris | windows

This option enables you to update the operating system of the computer.

EXAMPLES

Example 1 - Display the information on all the hosts in a particular EMM domain.

# nbemmcmd -getemmserver
These hosts were found in this domain: throttle, upwords
Checking with host: throttle...
Checking with host: upwords...
Server Type   Host Version              Host Name         EMM Server
MEDIA         UNKNOWN RELEASE (0)       throttle          throttle
MASTER        7.6                       upwords           upwords

One or more hosts had mismatched EMM Servers.
Run-time failure: The consistency check either failed or was 
incomplete. Command did not complete successfully.

Example 2 - Change the EMM server name for certain hosts in the domain whose name matches the old EMM server name.

# nbemmcmd -setemmserver -emmservername throttle -newemm upwords
These hosts were found in this domain: throttle, upwords
Checking with host: throttle...
Checking with host: upwords...
Server Type    Host Version             Host Name         EMM Server
MEDIA          UNKNOWN RELEASE (0)      throttle          throttle
EMM server name was changed.
MASTER         7.6                      upwords           upwords
One media hosts had EMM Server name changed. Command was completed 
successfully.

Example 3 - List the settings for computer name orbitvm1.

# nbemmcmd -listsettings -machinename orbitvm1
NBEMMCMD, Version:7.1
The following configuration settings were found:
ALLOW_MULTIPLE_RETENTIONS_PER_MEDIA="no"
DISABLE_DISK_STU_JOB_THROTTLING="no"
DISABLE_STANDALONE_DRIVE_EXTENSIONS="no"
MEDIA_REQUEST_DELAY="0"
MUST_USE_LOCAL_DRIVE="no"
NON_ROBOTIC_MEDIA_ID_PREFIX="A"
MAX_REALLOC_TRIES="1000"
DISABLE_BACKUPS_SPANNING_DISK="no"
DISALLOW_NONNDMP_ON_NDMP_DRIVE="no"
DO_NOT_EJECT_STANDALONE="no"
PREFER_NDMP_PATH_FOR_RESTORE="yes"
DONT_USE_SLAVE="no"
DRIVE_ERROR_THRESHOLD="2"
MEDIA_ERROR_THRESHOLD="2"
TIME_WINDOW="12"
SCSI_PROTECTION="SR"
NBUFS_DUP_TSU_TO_DSU="no"
NBUFS_DESTINATION_DSU="NONE"
NBUFS_RETENTION_LEVEL="0"
MPMS_DISABLE_RANK="0"
MPMS_DISABLE_EVENTS="no"
UNRESTRICTED_SHARING="no"
FATPIPE_USAGE_PREFERENCE="Preferred"
FATPIPE_WAIT_PERIOD="15"
FATPIPE_RESTORE_WAIT_PERIOD="5"
FT_MAX_CLIENT_PORTS_PER_SERVER="2"
FT_MAX_CLIENTS_PER_PORT="2"
SHAREDDISK_MOUNT_POINT="/nbushareddisk"
AUDIT="ENABLED"
AUDIT_RETENTION_PERIOD="90"
RETURN_UNASSIGNED_MEDIA_TO_SCRATCH_POOL="yes"
VAULT_CLEAR_MEDIA_DESC="no"
SCSI_PERSISTENT_RESERVE="0"
Command completed successfully.