Veritas NetBackup™ for VMware Administrator's Guide

To restore individual files using instant recovery

1. Use vSphere Client to log on to the vCenter server.

   You must use a logon that allows access to the files that you want to recover.

2. Create a vSphere standard switch.

   This switch is for access to the ESX host from the sandbox or private network where the VM is to be activated from its backup.

   Note:

   The switch is for internal communication within the ESX host only.

   For example, in vSphere Client 5:

   • Select the ESX host for communication between the restored virtual machine and the intermediary virtual machine.

   • On the Configuration tab, in the Hardware pane, click Networking.

   • Click Add Networking.

   • Select Virtual Machine as the connection type.

   • Select Create a vSphere standard switch.

   • For Port Group Properties, Network Label, enter a name for the internal switch (such as NB or NetBackup).

   • Click Finish.

3. On the intermediary virtual machine, add a network card (NIC) to be connected to the vSphere standard switch.

   Use this connection to retrieve files from the restored virtual machine that is to be mounted on the private network.

   Note:

   This intermediary virtual machine must already have a network connection to the public network or production network.

   For example, in vSphere Client 5:

   • Select the intermediary virtual machine.

   • On the Summary tab, click Edit Settings.

   • Click Add.

   • Select Ethernet Adapter.

   • For the Network label, select the private network that is created in step 2.

   • Click Finish.

4. If the intermediary's guest OS does not automatically assign an IP address for the private network after step 3, note: You must manually configure the IP address, default gateway, and subnet mask.

   The intermediary should now be connected to both the public network and to the private network where the virtual machine is to be restored.

5. Use the nbrestorevm command to restore the virtual machine.

   nbrestorevm -vmw -ir_activate -C virtual_machine -temp_location temporary_datastore -R rename_file_path -vmsn

   -vmsn specifies that no network is enabled for the virtual machine when it is activated from the backup image. Without the -vmsn option, network conflicts with the production virtual machine may occur.

   The file that is designated by -R rename_file_path specifies a different display name or location for the restored virtual machine. You must change the virtual machine name or location to avoid conflicts with the current virtual machine in production. For example, to rename the virtual machine, the rename file can consist of the following entry (ending with a carriage return):

   change vmname to acme_vm5

   Note:

   The words change vmname to are literals, followed by the actual name to change to (such as acme_vm5).

   See Instant Recovery options on the nbrestorevm command.

   For other nbrestorevm options, see the man page or the NetBackup Commands Reference Guide.

6. Add a network card (NIC) to the restored virtual machine and connect the NIC to the vSphere standard switch from step 2.
7. Turn on the restored virtual machine.
8. If the guest OS does not automatically assign an IP address for the private network, configure the IP address, default gateway, and subnet mask.
9. Set up file sharing (such as through FTP, NFS, or CIFS) between the restored virtual machine and the intermediary virtual machine.

   Then copy the files from the restored virtual machine to the intermediary virtual machine. The current virtual machine in production can access the files.

10. If you do not want to keep the restored virtual machine, enter the following:

    nbrestorevm - ir_listvm

    In the -ir_listvm output, find the VM Instant Recovery ID for the restored virtual machine.

    To remove the restored virtual machine:

    nbrestorevm - ir_deactivate instant recovery ID

    where instant recovery ID is the virtual machine's numeric identifier from the -ir_listvm output.