Veritas NetBackup™ Appliance Commands Reference Guide

Last Published:
Product(s): Appliances (5.3)
Platform: NetBackup Appliance OS
  1. Overview
    1.  
      About the NetBackup Appliance Shell Menu
    2. Logging in to the NetBackup Appliance Shell Menu
      1.  
        Command limitations on appliances that are not configured
    3.  
      Using the NetBackup Appliance Shell Menu
    4. About the NetBackup Appliance Shell Menu command views
      1.  
        About the commands under the Appliance view
      2.  
        About the commands under the Manage view
      3.  
        About the commands under the Monitor view
      4.  
        About the commands under the Network view
      5.  
        About the commands under the Reports view
      6.  
        About the commands under the Settings view
      7.  
        About the commands under the Support view
  2. Appendix A. Main > Appliance commands
    1.  
      Appliance > Primary
    2.  
      Appliance > Media
    3.  
      Appliance > Management
    4.  
      Appliance > Remove
    5.  
      Appliance > ShowDedupPassword
    6.  
      Appliance > ShowIdentity
    7.  
      Appliance > Status
  3. Appendix B. Main > Manage > FibreChannel commands
    1.  
      Manage > FibreChannel > Clean
    2.  
      Manage > FibreChannel > Configure
    3.  
      Manage > FibreChannel > Reset
    4.  
      Manage > FibreChannel > Scan
    5.  
      Manage > FibreChannel > Show
    6.  
      Manage > FibreChannel > Statistics
  4. Appendix C. Main > Manage > HighAvailability commands
    1.  
      Manage > HighAvailability > AddNode
    2.  
      Manage > HighAvailability > AutoFix
    3.  
      Manage > HighAvailability > GetAssetTag
    4.  
      Manage > HighAvailability > RemoveNode
    5.  
      Manage > HighAvailability > Setup
    6.  
      Manage > HighAvailability > Status
    7.  
      Manage > HighAvailability > Switchover
  5. Appendix D. Main > Manage > Libraries commands
    1.  
      Manage > Libraries > Configure
    2.  
      Manage > Libraries > Deny
    3.  
      Manage > Libraries > Down
    4.  
      Manage > Libraries > Inventory
    5.  
      Manage > Libraries > List
    6.  
      Manage > Libraries > Requests
    7.  
      Manage > Libraries > Reset
    8.  
      Manage > Libraries > Resubmit
    9.  
      Manage > Libraries > Up
  6. Appendix E. Main > Manage > Libraries > Advanced > ACS commands
    1.  
      Manage > Libraries > Advanced > ACS > ACS_CSI_HOSTPORT
    2.  
      Manage > Libraries > Advanced > ACS > ACS_SEL_SOCKET
    3.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_HOSTNAME
    4.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_INET_PORT
    5.  
      Manage > Libraries > Advanced > ACS > ACS_SSI_SOCKET
    6.  
      Manage > Libraries > Advanced > ACS > ACS_TCP_RPCSERVICE
    7.  
      Manage > Libraries > Advanced > ACS > ACS_UDP_RPCSERVICE
    8.  
      Manage > Libraries > Advanced > ACS > API_BARCODE_RULES
    9.  
      Manage > Libraries > Advanced > ACS > TestACS
    10.  
      Manage > Libraries > Advanced > ACS > ViewVMconf
  7. Appendix F. Main > Manage > License commands
    1.  
      Manage > License
  8. Appendix G. Main > Manage > MountPoints commands
    1.  
      Manage > MountPoints > List
    2.  
      Manage > MountPoints > Mount
    3.  
      Manage > MountPoints > Unmount
  9. Appendix H. Main > Manage > NetBackup CLI commands
    1.  
      Manage > NetBackupCLI > AllowSelfService
    2.  
      Manage > NetBackupCLI > Create
    3.  
      Manage > NetBackupCLI > Delete
    4.  
      Manage > NetBackupCLI > List
  10. Appendix I. Main > Manage > OpenStorage commands
    1.  
      Manage > OpenStorage > Install
    2.  
      Manage > OpenStorage > List
    3.  
      Manage > OpenStorage > Readme
    4.  
      Manage > OpenStorage > Share
    5.  
      Manage > OpenStorage > Uninstall
  11. Appendix J. Main > Manage > Software commands
    1.  
      Manage > Software > Cancel
    2.  
      Manage > Software > Delete
    3.  
      Manage > Software > Download
    4.  
      Manage > Software > DownloadAnalyzer
    5.  
      Manage > Software > DownloadProgress
    6.  
      Manage > Software > Firmware
    7.  
      Manage > Software > Install
    8.  
      Manage > Software > List
    9.  
      Manage > Software > Readme
    10.  
      Manage > Software > Rollback
    11.  
      Manage > Software > Share
    12.  
      Manage > Software > UpgradeReadinessCheck
    13.  
      Manage > Software > UpgradeStatus
    14.  
      Manage > Software > VxUpdate
  12. Appendix K. Main > Manage > Storage commands
    1.  
      Manage > Storage > Add
    2.  
      Manage > Storage > Create
    3.  
      Manage > Storage > Delete
    4.  
      Manage > Storage > Edit
    5.  
      Manage > Storage > Monitor
    6.  
      Manage > Storage > Move
    7.  
      Manage > Storage > Remove
    8.  
      Manage > Storage > Resize
    9.  
      Manage > Storage > Scan
    10.  
      Manage > Storage > Show
  13. Appendix L. Main > Manage > Tapes commands
    1.  
      Manage > Tapes > Cleaning
    2.  
      Manage > Tapes > Delete
    3.  
      Manage > Tapes > Eject
    4.  
      Manage > Tapes > Freeze
    5.  
      Manage > Tapes > Inventory
    6.  
      Manage > Tapes > List
    7.  
      Manage > Tapes > ListNetBackupMedia
    8.  
      Manage > Tapes > Suspend
    9.  
      Manage > Tapes > Unfreeze
    10.  
      Manage > Tapes > Unsuspend
  14. Appendix M. Main > Monitor commands
    1.  
      Monitor > Beacon
    2.  
      Monitor > Hardware
    3.  
      Monitor > MemoryStatus
    4.  
      Monitor > NetBackup
    5.  
      Monitor > NetworkStatus
    6.  
      Monitor > SDCS
    7.  
      Monitor > Top
    8.  
      Monitor > Uptime
    9.  
      Monitor > Who
  15. Appendix N. Main > Network commands
    1.  
      Network > Configure
    2.  
      Network > Date
    3.  
      Network > DNS
    4.  
      Network > Gateway
    5.  
      Network > Hostname
    6.  
      Network > Hosts
    7.  
      Network > IPv4
    8.  
      Network > IPv6
    9.  
      Network > LinkAggregation
    10.  
      Network > NetStat
    11.  
      Network > NTPServer
    12.  
      Network > Ping
    13.  
      Network > SetProperty
    14.  
      Network > Show
    15.  
      Network > TimeZone
    16.  
      Network > TraceRoute
    17.  
      Network > Unconfigure
    18.  
      Network > VLAN
    19.  
      Network > WANOptimization
  16. Appendix O. Main > Network > Security commands (DeviceCert)
    1.  
      Network > Security > Export
    2.  
      Network > Security > Import
  17. Appendix P. Main > Reports commands
    1.  
      Reports > Deduplication
    2.  
      Reports > Process
  18. Appendix Q. Main > Settings commands
    1.  
      Settings > Deduplication
    2.  
      Settings > FibreTransport
    3.  
      Settings > iSCSI > Initiator
    4.  
      Settings > iSCSI > Interface
    5.  
      Settings > iSCSI > Target
    6.  
      Settings > LifeCycle
    7.  
      Settings > LogForwarding
    8.  
      Settings > NetBackup
    9.  
      Settings > NetBackup DNAT
    10.  
      Settings > NetBackup NATServers
    11.  
      Settings > Password
    12.  
      Settings > Share
    13.  
      Settings > SNMP
    14.  
      Settings > Sysctl
    15.  
      Settings > SystemLocale
  19. Appendix R. Main > Settings > Alerts commands
    1.  
      Settings > Alerts > CallHome
    2.  
      Settings > Alerts > Email
    3.  
      Settings > Alerts > Hardware
    4.  
      Settings > Alerts > SNMP
    5.  
      Settings > Alerts > Transmission
  20. Appendix S. Main > Settings > Notifications view commands
    1.  
      Settings > Notifications > LoginBanner
  21. Appendix T. Main > Settings > Security commands
    1.  
      Settings > Security > Antimalware
    2.  
      Settings > Security > Authorization
    3.  
      Settings > Security > Authentication > AccountStatus
    4.  
      Settings > Security > Authentication > ActiveDirectory
    5.  
      Main > Settings > Security > Authentication > CIFSShare
    6.  
      Settings > Security > Authentication > LDAP
    7.  
      Settings > Security > Authentication > LocalUser
    8.  
      Settings > Security > Authentication > MFA
    9.  
      Settings > Security > Authentication > SingleSignOn
    10.  
      Settings > Security > Authentication > SmartCard > SSH
    11.  
      Settings > Security > Authentication > SmartCard
    12.  
      Main > Settings > Security > Certificate
    13.  
      Main > Settings > Security > Certificate > CertificateSigningRequest
    14.  
      Main > Settings > Security > FIPS
    15.  
      Settings > Security > NetworkAccessControl
    16.  
      Main > Settings > Security > PasswordAge
    17.  
      Main > Settings > Security > Ports
    18.  
      Main > Settings > Security > SecurityLevel
    19.  
      Main > Settings > Security > Sessions
    20.  
      Main > Settings > Security > STIG
  22. Appendix U. Main > Support commands
    1.  
      Support > Checkpoint
    2.  
      Support > Cleanup > CleanMonInvData
    3.  
      Support > Cleanup > RemoveShelfEntries
    4.  
      Support > Cleanup > ResetDIMMErrors
    5.  
      Support > Collect
    6.  
      Support > DataCollect
    7.  
      Support > Disk
    8.  
      Support > Errors
    9.  
      Support > FactoryReset
    10.  
      Support > FibreTransport
    11.  
      Support > ImportISO
    12.  
      Support > InfraServices
    13.  
      Support > InstantAccess
    14.  
      Support > iostat
    15.  
      Support > IPMI
    16.  
      Support > KillRemoteCall
    17.  
      Support > LogBrowser
    18.  
      Support > Logs
    19.  
      Support > Maintenance
    20.  
      Support > Messages
    21.  
      Support > NBDNA
    22.  
      Support > Nbperfchk
    23.  
      Support > NBSU
    24.  
      Support > Processes
    25.  
      Support > RAID
    26.  
      Support > Reboot
    27.  
      Support > RecoverStorage
    28.  
      Support > Service
    29.  
      Support > ShelfOrdering
    30.  
      Support > SHMCLI
    31.  
      Support > Show
    32.  
      Support > Shutdown
    33.  
      Support > Storage ClearReservations
    34.  
      Support > Storage SanityCheck
    35.  
      Support > Storage Show
    36.  
      Support > System
    37.  
      Support > Test

Name

Main > Settings > Security > Authentication > SmartCard — - Configure and manage authentication in the NetBackup Appliance Web Console with smart cards.

SYNOPSIS

Configure

Disable

Enable

Show

DESCRIPTION

You can use the SmartCard command to perform the following tasks:

  • Configure the mapping between the identities in the client digital certificates stores on smart cards and the identities on the appliance. Optionally, you can override the Online Certificate Status Protocol (OCSP) responder that is stored in the client certificates.

  • Disable smart card authentication. This command allows you to turn off the feature but does not change any other settings in DNS, Certificate Authority (CA) certificates, LDAP, or SmartCard. You can use the enable command to re-enable the smart card authentication immediately.

  • Enable the smart card authentication. If DNS, CA, LDAP, and the SmartCard Configure MappingAttribute and OCSP URI have been set, authentication with smart cards is enabled.

  • Show the options for the mapping attribute and OCSP URI. It also displays the status of the feature as Enabled or Disabled.

Note:

These commands are specific to smart card authentication but are not sufficient to enable smart card authentication.

See the NetBackup Appliance Security Guide for complete details.

For instructions on logging in to the appliance web console with a smart card, see the topic "Logging into the NetBackup Appliance Web Console" in the NetBackup Appliance Administrator's Guide.

OPTIONS

The following commands and options are available under Authentication > SmartCard:

Configure MappingAttr CN/UPN

If Common Name (CN) is chosen, the CN in the certificate must match the CN field of a user record in the remote database. For OpenLDAP, the UID in that record is retrieved as the username on the appliance. If ActiveDirectory is the remote database, the SAM account name is retrieved. If the username that is retrieved matches an authorized user on the appliance, the login of that user is successful.

If User Principal Name (UPN) is chosen, the Subject Alternative Name or the Principal Name of the certificate is used. For ActiveDirectory, if the UPN field of a user record matches, the SAM account name is retrieved as the username on the appliance. For OpenLDAP, the username of the UPN (the portion to the left of the "@" symbol) should match the UID of a user record in the database. and the UID is the username on the appliance. If the username that is retrieved matches an authorized user on the appliance, login of that user is successful.

Configure OCSPURI Set

Enter the URI of the OCSP responder. If entered, it overrides the OCSP responder URI in the client certificate. The OCSP URI parameter determines if the certificate on the smart card has been revoked. It is an optional parameter. The URI is an FQDN or IPv4 address. An IPv6 address is not supported for the OCSP URI. The HTTPS protocol is not supported. The URI must begin with http://.

Note:

If authentication with smart card fails even after all the necessary steps have been performed, use the SmartCard > Show command and verify that the parameters, including the OCSP URI (if present) are correct. Verify that a name server which can resolve the OCSP URI is configured in the Network menu by navigating to Network > DNS Show.

Disable

Disables smart card authentication if it is enabled.

Enable

Enables smart card authentication. If all the prerequisites for DNS, CA, LDAP, and SmartCard menu Configure commands have been correctly performed, authentication with smart cards is enabled.

Show

Shows the values of the mapping attribute, OCSP URI, and status of the smart card authentication.

EXAMPLE

The following shows an example of the output for the Show command.

nbapp2b1.SmartCard> Show
Smart Card Configuration Status
+-------------------------------+---------------------------------+
| Smart Card Authentication     | Disabled                        |
+-------------------------------+---------------------------------+
| Certificate Mapping Attribute | UPN                             |
+-------------------------------+---------------------------------+
| OCSP URI                      | http://ocsp.host.com            |
+-------------------------------+---------------------------------+