Storage Foundation for Oracle® RAC 7.4.1 Configuration and Upgrade Guide - Solaris

To configure the virtual IP of the cluster

1. Review the required information to configure the virtual IP of the cluster.
2. When the system prompts whether you want to configure the virtual IP, enter y.
3. Confirm whether you want to use the discovered public NIC on the first system.

   Do one of the following:

   • If the discovered NIC is the one to use, press Enter.

   • If you want to use a different NIC, type the name of a NIC to use and press Enter.

   Active NIC devices discovered on sys1: net0
   Enter the NIC for Virtual IP of the Cluster to use on sys1:
   [b,q,?](net0)

4. Confirm whether you want to use the same public NIC on all nodes.

   Do one of the following:

   • If all nodes use the same public NIC, enter y.

   • If unique NICs are used, enter n and enter a NIC for each node.

   Is net0 to be the public NIC used by all systems 
   [y,n,q,b,?] (y)

5. Enter the virtual IP address for the cluster.

   Enter the Virtual IP address for the Cluster: 
   [b,q,?] 192.168.1.16

6. Confirm the default netmask or enter another one:

   Enter the netmask for IP 192.168.1.16: [b,q,?] (255.255.240.0)

7. Verify and confirm the Cluster Virtual IP information.

   Cluster Virtual IP verification:
   
         NIC: net0
         IP: 192.168.1.16
         Netmask: 255.255.240.0

   Is this information correct? [y,n,q] (y)