Storage Foundation for Oracle® RAC 7.4.1 Configuration and Upgrade Guide - Solaris

CFG {fencing_config_cpagent}

Enter '1' or '0' depending upon whether you want to configure the Coordination Point agent using the installer or not.

Enter "0" if you do not want to configure the Coordination Point agent using the installer.

Enter "1" if you want to use the installer to configure the Coordination Point agent.

CFG {fencing_cpagentgrp}

Name of the service group which will have the Coordination Point agent resource as part of it.

CFG {fencing_cps}

Virtual IP address or Virtual hostname of the CP servers.

CFG {fencing_reusedg}

This response file field indicates whether to reuse an existing DG name for the fencing configuration in customized fencing (CP server and coordinator disks).

Enter either a "1" or "0".

Entering a "1" indicates reuse, and entering a "0" indicates do not reuse.

When reusing an existing DG name for the mixed mode fencing configuration. you need to manually add a line of text , such as "$CFG{fencing_reusedg}=0" or "$CFG{fencing_reusedg}=1" before proceeding with a silent installation.

CFG {fencing_dgname}

The name of the disk group to be used in the customized fencing, where at least one disk is being used.

CFG {fencing_disks}

The disks being used as coordination points if any.

CFG {fencing_ncp}

Total number of coordination points being used, including both CP servers and disks.

CFG {fencing_ndisks}

The number of disks being used.

CFG {fencing_cps_vips}

The virtual IP addresses or the fully qualified host names of the CP server.

CFG {fencing_cps_ports}

The port that the virtual IP address or the fully qualified host name of the CP server listens on.

CFG{fencing_option}

CFG{fencing_auto_refresh_reg}

Enable this variable if registration keys are missing on any of the CP servers.