请输入搜索词进行查询
搜索 <book_title>...
Veritas NetBackup™ Appliance 命令参考指南
Last Published:
2017-12-04
Product(s):
Appliances (3.1 (5340), 3.1 (5330), 3.1 (5240), 3.1 (5230), 3.1 (5220))
- 概述
- 附录 A. Main > Appliance 命令
- 附录 B. Main > Manage > FibreChannel 命令
- 附录 C. Main > Manage > HighAvailability 命令
- 附录 D. Main > Manage > Libraries 命令
- 附录 E. Main > Manage > Libraries > Advanced > ACS 命令
- Manage > Libraries > Advanced > ACS > ACS_CSI_HOSTPORT
- Manage > Libraries > Advanced > ACS > ACS_SEL_SOCKET
- Manage > Libraries > Advanced > ACS > ACS_SSI_HOSTNAME
- Manage > Libraries > Advanced > ACS > ACS_SSI_INET_PORT
- Manage > Libraries > Advanced > ACS > ACS_SSI_SOCKET
- Manage > Libraries > Advanced > ACS > ACS_TCP_RPCSERVICE
- Manage > Libraries > Advanced > ACS > ACS_UDP_RPCSERVICE
- Manage > Libraries > Advanced > ACS > API_BARCODE_RULES
- Manage > Libraries > Advanced > ACS > TestACS
- Manage > Libraries > Advanced > ACS > ViewVMconf
- 附录 F. Main > Manage > License 命令
- 附录 G. Main > Manage > MountPoints 命令
- 附录 H. Main > Manage > NetBackup CLI 命令
- 附录 I. Main > Manage > OpenStorage 命令
- 附录 J. Main > Manage > Software 命令
- Manage > Software > Cancel
- Manage > Software > Delete
- Manage > Software > Download
- Manage > Software > DownloadProgress
- Manage > Software > Firmware
- Manage > Software > Install
- Manage > Software > List
- Manage > Software > LiveUpdateClients
- Manage > Software > Readme
- Manage > Software > Rollback
- Manage > Software > Share
- Manage > Software > UpgradeStatus
- 附录 K. Main > Manage > Storage 命令
- 附录 L. Main > Manage > Tapes 命令
- 附录 M. Main > Manage > Certificates 命令
- 附录 N. Main > Monitor 命令
- 附录 O. Main > Network 命令
- Network > Configure
- Network > Date
- Network > DNS
- Network > Gateway
- Network > Hostname
- Network > Hosts
- Network > IPv4
- Network > IPv6
- Network > LinkAggregation
- Network > NetStat
- Network > NTPServer
- Network > Ping
- Network > SetProperty
- Network > Show
- Network > TimeZone
- Network > TraceRoute
- Network > Unconfigure
- Network > VLAN
- Network > WANOptimization
- 附录 P. Main > Network > Security (IPsec) 命令
- 附录 Q. Main > Reports 命令
- 附录 R. Main > Settings 命令
- Settings > Cloud
- Settings > Deduplication
- Settings > FibreTransport
- Settings > iSCSI > Initiator
- Settings > iSCSI > Interface
- Settings > iSCSI > Target
- Settings > LogForwarding
- Settings > LifeCycle
- Settings > LiveUpdateServer
- Settings > NetBackup
- Settings > Password
- Settings > Share
- Settings > SNMP polling
- Settings > Sysctl
- Settings > SystemLocale
- 附录 S. Main > Settings > Alerts 命令
- 附录 T. Main > Settings > Notifications 视图命令
- 附录 U. Main > Settings > Security 命令
- 附录 V. Main > Support 命令
- Support > Checkpoint
- Support > Cleanup > RemoveShelfEntries
- Support > Cleanup > ResetDIMMErrors
- Support > Collect
- Support > DataCollect
- Support > Disk
- Support > Errors
- Support > FactoryReset
- Support > FibreTransport
- Support > InfraServices
- Support > iostat
- Support > IPMI
- Support > KillRemoteCall
- Support > Logs
- Support > Maintenance
- Support > Messages
- Support > NBDNA
- Support > nbperfchk
- Support > NBSU
- Support > Processes
- Support > RAID
- Support > Reboot
- Support > RecoverStorage
- Support > Service
- Support > ServiceAllowed
- Support > Show
- Support > Shutdown
- Support > Storage ClearReservations
- Support > Storage Reset
- Support > Storage SanityCheck
- Support > Test
名称
Main > Settings > LogForwarding — 启用/禁用和管理将日志转发到外部日志管理服务器的设置。
大纲
LogForwarding Enable
LogForwarding Disable
LogForwarding Interval
LogForwarding Share
LogForwarding Show
描述
使用此命令可将设备日志转发到外部管理服务器。当前仅支持 syslog 转发。
选项
- LogForwarding Enable
在设备上启用 syslog 转发功能。此命令要求指定以下选项：
目标服务器名称或 IP 地址
服务器端口
协议 (UDP/TCP)
以分钟为单位的转发间隔 (0/15/30/45/60)
启用 TLS（是/否）
- LogForwarding Interval
设置或更改 syslog 的转发频率，如下所示：
— 在生成后转发 syslog。
— 每 15 分钟转发 syslog 一次。
— 每 30 分钟转发 syslog 一次。
— 每 45 分钟转发 syslog 一次。
- 每 60 分钟转发 syslog 一次。
- LogForwarding Share Open
打开设备上的 的 NFS 和 CIFS 共享。在设备上启用 TLS 之前，请确保已将有效证书上载到打开的共享。需要两个证书和一个私钥，如下所示：
ca-server.pem
nba-rsyslog.pem
nba-rsyslog.key
- LogForwarding Share Close
出于安全原因关闭设备上的 的 NFS 和 CIFS 共享。
- LogForwarding Show
查看当前日志转发配置的状态。
- LogForwarding Disable
禁用日志转发功能并删除当前日志转发配置。
示例
— 在使用 TLS 的设备上启用 syslog 转发。
abc123.LogForwarding> enable
- [Info] Only syslog forwarding is supported at this time.
>> Enter server name or IP address: Veritas
>> Enter server port: 514
>> Select Protocol [UDP, TCP](TCP)
>> Set interval in minutes: [0, 15, 30, 45, 60](15)
>> Enable TLS(Only Anonymous authentication mode is supported)?
[yes, no](yes) Yes
- [Info] Summary:
Target server name or IP address: Veritas
Port: 514
Protocol: TCP
Interval: 15 minutes
TLS: no
Do you want to continue? [yes, no] (yes) y
- [Info] Applying the changes...
- [Info] Logs are scheduled for forwarding every 15 minutes.
- [Info] Syslog forwarding is enabled.