请输入搜索词进行查询
搜索 <book_title>...
Veritas NetBackup™ Appliance 命令参考指南
Last Published:
2017-12-04
Product(s):
Appliances (3.1 (5340), 3.1 (5330), 3.1 (5240), 3.1 (5230), 3.1 (5220))
- 概述
- 附录 A. Main > Appliance 命令
- 附录 B. Main > Manage > FibreChannel 命令
- 附录 C. Main > Manage > HighAvailability 命令
- 附录 D. Main > Manage > Libraries 命令
- 附录 E. Main > Manage > Libraries > Advanced > ACS 命令
- Manage > Libraries > Advanced > ACS > ACS_CSI_HOSTPORT
- Manage > Libraries > Advanced > ACS > ACS_SEL_SOCKET
- Manage > Libraries > Advanced > ACS > ACS_SSI_HOSTNAME
- Manage > Libraries > Advanced > ACS > ACS_SSI_INET_PORT
- Manage > Libraries > Advanced > ACS > ACS_SSI_SOCKET
- Manage > Libraries > Advanced > ACS > ACS_TCP_RPCSERVICE
- Manage > Libraries > Advanced > ACS > ACS_UDP_RPCSERVICE
- Manage > Libraries > Advanced > ACS > API_BARCODE_RULES
- Manage > Libraries > Advanced > ACS > TestACS
- Manage > Libraries > Advanced > ACS > ViewVMconf
- 附录 F. Main > Manage > License 命令
- 附录 G. Main > Manage > MountPoints 命令
- 附录 H. Main > Manage > NetBackup CLI 命令
- 附录 I. Main > Manage > OpenStorage 命令
- 附录 J. Main > Manage > Software 命令
- Manage > Software > Cancel
- Manage > Software > Delete
- Manage > Software > Download
- Manage > Software > DownloadProgress
- Manage > Software > Firmware
- Manage > Software > Install
- Manage > Software > List
- Manage > Software > LiveUpdateClients
- Manage > Software > Readme
- Manage > Software > Rollback
- Manage > Software > Share
- Manage > Software > UpgradeStatus
- 附录 K. Main > Manage > Storage 命令
- 附录 L. Main > Manage > Tapes 命令
- 附录 M. Main > Manage > Certificates 命令
- 附录 N. Main > Monitor 命令
- 附录 O. Main > Network 命令
- Network > Configure
- Network > Date
- Network > DNS
- Network > Gateway
- Network > Hostname
- Network > Hosts
- Network > IPv4
- Network > IPv6
- Network > LinkAggregation
- Network > NetStat
- Network > NTPServer
- Network > Ping
- Network > SetProperty
- Network > Show
- Network > TimeZone
- Network > TraceRoute
- Network > Unconfigure
- Network > VLAN
- Network > WANOptimization
- 附录 P. Main > Network > Security (IPsec) 命令
- 附录 Q. Main > Reports 命令
- 附录 R. Main > Settings 命令
- Settings > Cloud
- Settings > Deduplication
- Settings > FibreTransport
- Settings > iSCSI > Initiator
- Settings > iSCSI > Interface
- Settings > iSCSI > Target
- Settings > LogForwarding
- Settings > LifeCycle
- Settings > LiveUpdateServer
- Settings > NetBackup
- Settings > Password
- Settings > Share
- Settings > SNMP polling
- Settings > Sysctl
- Settings > SystemLocale
- 附录 S. Main > Settings > Alerts 命令
- 附录 T. Main > Settings > Notifications 视图命令
- 附录 U. Main > Settings > Security 命令
- 附录 V. Main > Support 命令
- Support > Checkpoint
- Support > Cleanup > RemoveShelfEntries
- Support > Cleanup > ResetDIMMErrors
- Support > Collect
- Support > DataCollect
- Support > Disk
- Support > Errors
- Support > FactoryReset
- Support > FibreTransport
- Support > InfraServices
- Support > iostat
- Support > IPMI
- Support > KillRemoteCall
- Support > Logs
- Support > Maintenance
- Support > Messages
- Support > NBDNA
- Support > nbperfchk
- Support > NBSU
- Support > Processes
- Support > RAID
- Support > Reboot
- Support > RecoverStorage
- Support > Service
- Support > ServiceAllowed
- Support > Show
- Support > Shutdown
- Support > Storage ClearReservations
- Support > Storage Reset
- Support > Storage SanityCheck
- Support > Test
名称
Main > Manage > FibreChannel > Clean — 使用此命令清除有关系统中无响应的光纤通道设备的无效 SCSI 信息。
大纲
Clean
描述
SCSI 设备可能会变得无响应，因为这些设备可能已从系统删除，而操作系统保留了对这些 SCSI 设备的无效引用。此命令用于删除对这些不再相关的设备的操作系统引用。
注意:
Clean 操作可能使当前通过 FC 运行的复制作业失败。复制作业可故障转移到其他 FT 路径（如果存在）。如果不存在其他可用 FT 路径，它们将故障转移到以太网。如果不存在 FT 连接或 IP 连接，则作业将失败。
选项
- Clean
删除对已删除 SCSI 设备的无效操作系统引用。
示例
下面是运行 Main> Manage> FibreChannel> Clean 命令时的信息示例。
nbu-applaince.FC> Clean - [Info] FTMS mode: Fibre Transport server installed and running. - [Info] Fibre Transport Deduplication state: enabled **** FC HBA Cards **** 07:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02) 07:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02) 08:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02) 08:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02) 81:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02) 81:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02) 82:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02) 82:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02) **** Drivers **** qla2xxx is loaded windrvr6 is loaded qla2x00tgt is loaded scst is loaded scst_user is loaded **** Ports **** Bus ID Slot Port PortWWN Status PhysicalState ConfigurationType Speed RemotePorts 07:00.0 Slot5 1 21:00:00:24:FF:46:8A:12 Disconnected Target Target(FTMS) 0 gbit/s ------------ 07:00.1 Slot5 2 21:00:00:24:FF:46:8A:13 Fabric Target Target(FTMS) 8 gbit/s ------------ 08:00.0 Slot6 1 21:00:00:24:FF:8E:E4:0F Disconnected Target Target(FTMS) 0 gbit/s ------------ 08:00.1 Slot6 2 21:00:00:24:FF:8E:E4:0E Disconnected Target Target(FTMS) 0 gbit/s ------------ 81:00.0 Slot4 1 21:00:00:24:FF:8E:E4:14 Online Initiator Initiator 8 gbit/s 81:00.1 Slot4 2 21:00:00:24:FF:8E:E4:15 Online Target Target(MSDP) 8 gbit/s 82:00.0 Slot2 1 21:00:00:24:FF:8E:E5:B2 Linkdown Initiator Initiator 8 gbit/s 82:00.1 Slot2 2 21:00:00:24:FF:8E:E5:B3 Online Target Target(MSDP) 8 gbit/s **** Devices **** Device Vendor ID Type Remote Port **** Remote Appliances over FC **** Please scan for remote appliances over FC first