Veritas Access Appliance Command Reference Guide
- Overview
- Appendix A. Main > Appliance
- Appendix B. Main > Manage > Cluster
- Appendix C. Main > Manage > Software
- Appendix D. Main > Manage > Storage
- Appendix E. Main > Network
- Network > Configure
- Network > Date
- Network > DNS
- Network > Gateway
- Network > Hosts
- Network > IPv4
- Network > IPv6
- Network > SetProperty
- Network > Show
- Network > TimeZone
- Network > NetStat
- Network > NTPServer
- Network > Unconfigure
- Network > VLAN
- Network > TraceRoute
- Network > Ping
- Network > Hostname
- Network > Proxy
- Appendix F. Main > Monitor
- Appendix G. Main > Settings
- Appendix H. Main > Support
Name
Main > Support > Maintenance — Enables the user to open an interactive shell menu.
SYNOPSIS
Maintenance
DESCRIPTION
Your appliance node is pre-configured with a user account. When you log into this account, you open an interactive shell menu that you can use to troubleshoot or manage underlying operating system tasks.
The default password is, P@ssw0rd. Veritas recommends that you change this password at your earliest convenience. Use the following command to reset the password.
Main > Settings > Password UserName
In this case, the user name is maintenance.
If you require customer support to resolve an issue, you may be required to provide this password to your support representative. In addition, if you change this password and then run the FactoryReset command, this password is reset to the initial default value.
OPTIONS
- Maintenance
Used to enter an interactive shell menu that you can use to troubleshoot or manage underlying operating system tasks.
EXAMPLES
To enter your Maintenance account, run the following command, and provide the password when you receive a prompt.
NBAppl.Support> Maintenance <!--Maintenance Mode--!> maintenance's password: