NetBackup™ Web UI RHV Administrator's Guide

Last Published:
Product(s): NetBackup (8.2)
  1. Introducing the NetBackup web user interface
    1.  
      About the NetBackup web user interface
    2.  
      Terminology
    3.  
      Sign in to the NetBackup web UI
  2. Managing RHV servers
    1.  
      Quick configuration checklist to protect Red Hat Virtualization virtual machines
    2. Configuring secure communication between the Red Hat Virtualization server and NetBackup host
      1.  
        ECA_TRUST_STORE_PATH for NetBackup servers and clients
      2.  
        ECA_CRL_PATH for NetBackup servers and clients
      3.  
        VIRTUALIZATION_HOSTS_SECURE_CONNECT_ENABLED for servers and clients
      4.  
        VIRTUALIZATION_CRL_CHECK for NetBackup servers and clients
    3.  
      About the ports that NetBackup uses to communicate with RHV
    4. Add or browse an RHV manager
      1.  
        Adding a backup host to the NetBackup master server
      2.  
        Remove an RHV manager
    5.  
      Create an intelligent VM group
    6.  
      Remove an intelligent VM group
    7.  
      Setting global limits on the use of RHV resources
  3. Protecting RHV virtual machines
    1.  
      Things to know before you protect RHV virtual machines
    2.  
      Protect RHV VMs or intelligent VM groups
    3.  
      Remove protection from VMs or intelligent VM groups
    4.  
      View the protection status of VMs or intelligent VM groups
  4. Recovering RHV virtual machines
    1.  
      Things to consider before you recover the RHV virtual machines
    2.  
      About the pre-recovery check
    3.  
      Recover an RHV virtual machine
    4.  
      About the supported virtual disk formats and disk provisioning during VM recovery
  5. Troubleshooting RHV VM protection and recovery
    1.  
      Troubleshooting tips for NetBackup for RHV
    2.  
      Error run into during the RHV virtual machines discovery phase
    3.  
      Error run into while backing up RHV virtual machines
    4.  
      Error run into while restoring RHV virtual machines
  6. API and command line options for RHV
    1. Using APIs and command line options to manage, protect, or recover RHV virtual machines
      1.  
        Additional information about the rename file
    2. Additional NetBackup options for RHV configuration
      1.  
        OVIRT_IMAGEIO_INACTIVITY_TIMEOUT option for NetBackup servers
      2.  
        RHV_CREATEDISK_TIMEOUT option for NetBackup servers
      3.  
        RHV_AUTODISCOVERY_INTERVAL option for NetBackup servers

RHV_AUTODISCOVERY_INTERVAL option for NetBackup servers

This option controls how often NetBackup scans the RHV servers to discover virtual machines to display in the NetBackup web UI.

NetBackup attempts autodiscovery first with the same host for which the last discovery attempt was successful. If autodiscovery fails with that host, NetBackup tries again with other hosts in the following order:

  • The NetBackup master server

  • The access host, client, or proxy server

  • The media server

Table: RHV_AUTODISCOVERY_INTERVAL information

Usage

Description

Where to use

On NetBackup master servers.

How to use

Use the nbgetconfig and the nbsetconfig commands to view, add, or change the option.

The default is 28,800 seconds (8 hours). The minimum value is 300 seconds (5 minutes) and the maximum is 31,536,000 seconds (1 year).

Use the following format:

RHV_AUTODISCOVERY_INTERVAL = number of seconds

For example:

RHV_AUTODISCOVERY_INTERVAL = 100000

This entry should appear only once in the configuration file.

Note:

After changing this option, stop and restart the NetBackup services. For VM discovery, the NetBackup Discovery Framework service must be running.

Equivalent Administration Console property

No equivalent exists in the NetBackup Administration Console or web UI.