Veritas NetBackup™ Deduplication Guide
- Introducing the NetBackup media server deduplication option
- Planning your deployment
- Planning your MSDP deployment
- NetBackup naming conventions
- About MSDP deduplication nodes
- About the NetBackup deduplication destinations
- About MSDP storage capacity
- About MSDP storage and connectivity requirements
- About NetBackup media server deduplication
- About NetBackup Client Direct deduplication
- About MSDP remote office client deduplication
- About the NetBackup Deduplication Engine credentials
- About the network interface for MSDP
- About MSDP port usage
- About MSDP optimized synthetic backups
- About MSDP and SAN Client
- About MSDP optimized duplication and replication
- About MSDP performance
- About MSDP stream handlers
- MSDP deployment best practices
- Use fully qualified domain names
- About scaling MSDP
- Send initial full backups to the storage server
- Increase the number of MSDP jobs gradually
- Introduce MSDP load balancing servers gradually
- Implement MSDP client deduplication gradually
- Use MSDP compression and encryption
- About the optimal number of backup streams for MSDP
- About storage unit groups for MSDP
- About protecting the MSDP data
- Save the MSDP storage server configuration
- Plan for disk write caching
- Provisioning the storage
- Licensing deduplication
- Configuring deduplication
- Configuring MSDP server-side deduplication
- Configuring MSDP client-side deduplication
- About the MSDP Deduplication Multi-Threaded Agent
- Configuring the Deduplication Multi-Threaded Agent behavior
- Configuring deduplication plug-in interaction with the Multi-Threaded Agent
- About MSDP fingerprinting
- About the MSDP fingerprint cache
- Configuring the MSDP fingerprint cache behavior
- About seeding the MSDP fingerprint cache for remote client deduplication
- Configuring MSDP fingerprint cache seeding on the client
- Configuring MSDP fingerprint cache seeding on the storage server
- Enabling 250-TB support for MSDP
- About MSDP Encryption using KMS service
- Configuring a storage server for a Media Server Deduplication Pool
- Configuring a storage server for a PureDisk Deduplication Pool
- About disk pools for NetBackup deduplication
- Configuring a disk pool for deduplication
- Creating the data directories for 250-TB MSDP support
- Adding volumes to a 250-TB Media Server Deduplication Pool
- Configuring a Media Server Deduplication Pool storage unit
- Configuring client attributes for MSDP client-side deduplication
- Disabling MSDP client-side deduplication for a client
- About MSDP compression
- About MSDP encryption
- MSDP compression and encryption settings matrix
- Configuring encryption for MSDP backups
- Configuring encryption for MSDP optimized duplication and replication
- About the rolling data conversion mechanism for MSDP
- Modes of rolling data conversion
- MSDP encryption behavior and compatibilities
- Configuring optimized synthetic backups for MSDP
- About a separate network path for MSDP duplication and replication
- Configuring a separate network path for MSDP duplication and replication
- About MSDP optimized duplication within the same domain
- Configuring MSDP optimized duplication within the same NetBackup domain
- About MSDP replication to a different domain
- Configuring MSDP replication to a different NetBackup domain
- About NetBackup Auto Image Replication
- About trusted master servers for Auto Image Replication
- About the certificate to be used for adding a trusted master server
- Adding a trusted master server using a NetBackup CA-signed (host ID-based) certificate
- Adding a trusted master server using external CA-signed certificate
- Removing a trusted master server
- Enabling NetBackup clustered master server inter-node authentication
- Configuring NetBackup CA and NetBackup host ID-based certificate for secure communication between the source and the target MSDP storage servers
- Configuring external CA for secure communication between the source MSDP storage server and the target MSDP storage server
- Configuring a target for MSDP replication to a remote domain
- About configuring MSDP optimized duplication and replication bandwidth
- About storage lifecycle policies
- About the storage lifecycle policies required for Auto Image Replication
- Creating a storage lifecycle policy
- About MSDP backup policy configuration
- Creating a backup policy
- Resilient Network properties
- Specifying resilient connections
- Adding an MSDP load balancing server
- About variable-length deduplication on NetBackup clients
- About the MSDP pd.conf configuration file
- Editing the MSDP pd.conf file
- About the MSDP contentrouter.cfg file
- About saving the MSDP storage server configuration
- Saving the MSDP storage server configuration
- Editing an MSDP storage server configuration file
- Setting the MSDP storage server configuration
- About the MSDP host configuration file
- Deleting an MSDP host configuration file
- Resetting the MSDP registry
- About protecting the MSDP catalog
- Changing the MSDP shadow catalog path
- Changing the MSDP shadow catalog schedule
- Changing the number of MSDP catalog shadow copies
- Configuring an MSDP catalog backup
- Updating an MSDP catalog backup policy
- About MSDP FIPS compliance
- Configuring the NetBackup client-side deduplication to support multiple interfaces of MSDP
- Configuring deduplication to the cloud with NetBackup Cloud Catalyst
- Using NetBackup Cloud Catalyst to upload deduplicated data to the cloud
- Cloud Catalyst requirements and limitations
- Configuring a Linux media server as a Cloud Catalyst storage server
- Configuring a Cloud Catalyst storage server for deduplication to the cloud
- How to configure a NetBackup Cloud Catalyst Appliance
- How to configure a Linux media server as a Cloud Catalyst storage server
- Configuring a Cloud Catalyst storage server as the target for the deduplications from MSDP storage servers
- Managing Cloud Catalyst storage server with IAM Role or CREDS_CAPS credential broker type
- Configuring a storage lifecycle policy for NetBackup Cloud Catalyst
- About the Cloud Catalyst esfs.json configuration file
- About the Cloud Catalyst cache
- Controlling data traffic to the cloud when using Cloud Catalyst
- Configuring source control or target control optimized duplication for Cloud Catalyst
- Configuring a Cloud Catalyst storage server as the source for optimized duplication
- Decommissioning Cloud Catalyst cloud storage
- NetBackup Cloud Catalyst workflow processes
- Disaster recovery for Cloud Catalyst
- About automated disaster recovery in cloud using Cloud Catalyst
- Monitoring deduplication activity
- Monitoring the MSDP deduplication and compression rates
- Viewing MSDP job details
- About MSDP storage capacity and usage reporting
- About MSDP container files
- Viewing storage usage within MSDP container files
- Viewing MSDP disk reports
- About monitoring MSDP processes
- Reporting on Auto Image Replication jobs
- Managing deduplication
- Managing MSDP servers
- Viewing MSDP storage servers
- Determining the MSDP storage server state
- Viewing MSDP storage server attributes
- Setting MSDP storage server attributes
- Changing MSDP storage server properties
- Clearing MSDP storage server attributes
- About changing the MSDP storage server name or storage path
- Changing the MSDP storage server name or storage path
- Removing an MSDP load balancing server
- Deleting an MSDP storage server
- Deleting the MSDP storage server configuration
- Managing NetBackup Deduplication Engine credentials
- Managing Media Server Deduplication Pools
- Viewing Media Server Deduplication Pools
- Determining the Media Server Deduplication Pool state
- Changing Media Server Deduplication Pool state
- Viewing Media Server Deduplication Pool attributes
- Setting a Media Server Deduplication Pool attribute
- Changing a Media Server Deduplication Pool properties
- Clearing a Media Server Deduplication Pool attribute
- Determining the MSDP disk volume state
- Changing the MSDP disk volume state
- Inventorying a NetBackup disk pool
- Deleting a Media Server Deduplication Pool
- Deleting backup images
- About MSDP queue processing
- Processing the MSDP transaction queue manually
- About MSDP data integrity checking
- Configuring MSDP data integrity checking behavior
- About managing MSDP storage read performance
- About MSDP storage rebasing
- About the MSDP data removal process
- Resizing the MSDP storage partition
- How MSDP restores work
- Configuring MSDP restores directly to a client
- About restoring files at a remote site
- About restoring from a backup at a target master domain
- Specifying the restore server
- Managing MSDP servers
- Recovering MSDP
- Replacing MSDP hosts
- Uninstalling MSDP
- Deduplication architecture
- Troubleshooting
- About unified logging
- About legacy logging
- NetBackup MSDP log files
- Troubleshooting MSDP installation issues
- Troubleshooting MSDP configuration issues
- Troubleshooting MSDP operational issues
- Verify that the MSDP server has sufficient memory
- MSDP backup or duplication job fails
- MSDP client deduplication fails
- MSDP volume state changes to DOWN when volume is unmounted
- MSDP errors, delayed response, hangs
- Cannot delete an MSDP disk pool
- MSDP media open error (83)
- MSDP media write error (84)
- MSDP no images successfully processed (191)
- MSDP storage full conditions
- Troubleshooting MSDP catalog backup
- Viewing MSDP disk errors and events
- MSDP event codes and messages
- Troubleshooting Cloud Catalyst issues
- Cloud Catalyst logs
- Problems encountered while using the Cloud Storage Server Configuration Wizard
- Disk pool problems
- Problems during cloud storage server configuration
- Status 191: No images were successfully processed
- Media write error (84) if due to a full local cache directory
- Trouble restarting ESFS after the Cloud Catalyst storage server is down
- Restarting the vxesfsd process
- Problems restarting vxesfsd
- Cloud Catalyst troubleshooting tools
- Unable to obtain the administrator password to use an AWS EC2 instance that has a Windows OS
- Appendix A. Migrating to MSDP storage
Configuring a storage server for a PureDisk Deduplication Pool
Note:
NetBackup supports storage on NetBackup 5000 series appliances only.
Configure in this context means to configure a PureDisk Storage Pool Authority as a storage server in NetBackup.
See About the NetBackup deduplication destinations.
When you configure a storage server for MSDP, you specify the following:
The type of storage.
Select for the type of disk storage.
The credentials for the PureDisk Storage Pool Authority.
A media server to use as a backup server and deduplication server. Also, other media servers to use as load balancing servers, if any.
When you configure the storage server, the wizard also lets you configure a disk pool and storage unit also.
To configure a NetBackup storage server for a PureDisk Deduplication Pool by using the wizard
- In the NetBackup Administration Console, select either NetBackup Management or Media and Device Management.
- In the right pane, click Configure Disk Storage Servers.
The Storage Server Configuration Wizard Welcome panel appears.
- On the Welcome panel, select PureDisk Deduplication Pool.
The types of storage servers that you can configure depend on the options for which you are licensed.
The following is an example of the wizard panel:
After you select PureDisk Deduplication Pool, click Next. The Add Storage Server wizard panel appears.
- On the Add Storage Server panel, select or enter the appropriate information.
The following is an example of the wizard panel:
Media server
Select a media server to use to query the NetBackup 5000 series appliance for its capabilities. That media server also is used for deduplication.
You can add other deduplication load balancing servers on the next wizard panel.
Storage server name
Enter the host name of the NetBackup 5000 series appliance in the Storage server name field.
Username
Enter the user name for the NetBackup 5000 series appliance.
Password
Enter the password for the NetBackup 5000 series appliance.
Confirm password
To confirm the password, re-enter the password.
After you enter the information, click Next.
The Configure Additional Media Servers panel appears.
- On the Deduplication Load Balancing panel select other NetBackup media servers to use for deduplication load balancing. The wizard populates the media servers that you select with the Storage Pool Authority credentials you entered on a previous panel. Selecting load balancing servers is optional.
The following is an example of the wizard panel:
When you click Next, the Storage Server Configuration Summary panel appears next.
- On the Storage Server Configuration Summary panel, verify the selections. If OK, click Next.
The Storage Server Creation Status panel appears. It describes the status of the wizard actions.
- The Storage Server Configuration Status wizard panel describes the status of the operation, as follows:
After the storage server is created, you can do the following:
Configure a disk pool
Ensure that Create a disk pool using the storage server that you have just created is selected and then click Next.
The Select Volumes panel appears. Continue to the next step.
Exit
Click Close.
You can configure a disk pool at another time.
If storage server creation fails, troubleshooting help is available.
- On the Volume Selection panel, select the volume for this disk pool. All of storage of the NetBackup 5000 series appliance is exposed as a single volume. The PureDiskVolume is a virtual name for that storage.
The following is an example of the wizard panel:
After you select the PureDiskVolume volume, click Next. The Additional Disk Pool Information wizard panel appears.
- On the Additional Disk Pool Information panel, enter the values for this disk pool.
See Media Server Deduplication Pool properties.
The following is an example of the wizard panel:
After you enter the appropriate information or select the necessary options, click Next. The Disk Pool Configuration Summary wizard panel appears.
- On the Disk Pool Configuration Summary panel, verify the selections. If OK, click Next.
The following is an example of the wizard panel:
To configure the disk pool, click Next. The Disk Pool Configuration Status wizard panel appears.
- The Disk Pool Configuration Status wizard panel describes the progress of the operation.
The following is an example of the wizard panel:
After the disk pool is created, you can do the following:
Configure a storage unit
Ensure that Create a storage unit using the disk pool that you have just created is selected and then click Next. The Storage Unit Creation wizard panel appears. Continue to the next step.
Exit
Click Close.
You can configure one or more storage units later.
See Configuring a Media Server Deduplication Pool storage unit.
- Enter the appropriate information for the storage unit.
See Media Server Deduplication Pool storage unit properties.
The following is an example of the wizard panel:
After you enter the appropriate information or select the necessary options, click Next to create the storage unit.
- After NetBackup configures the storage unit, the Finished panel appears. Click Finish to exit from the wizard.
More Information