Storage Foundation for Oracle® RAC 7.4.1 Configuration and Upgrade Guide - Solaris

CFG{donotreconfigurevcs}

Scalar

Defines if you need to re-configure VCS.

(Optional)

CFG{donotreconfigurefencing}

Scalar

Defines if you need to re-configure fencing.

(Optional)

CFG{vcs_clusterid}

Scalar

An integer between 0 and 65535 that uniquely identifies the cluster.

(Required)

CFG{vcs_clustername}

Scalar

Defines the name of the cluster.

(Required)

CFG{vcs_allowcomms}

Scalar

Indicates whether or not to start LLT and GAB when you set up a single-node cluster. The value can be 0 (do not start) or 1 (start).

(Required)

CFG{vcs_lltlink#}

{"system"}

Scalar

Defines the NIC to be used for a private heartbeat link on each system. At least two LLT links are required per system (lltlink1 and lltlink2). You can configure up to four LLT links.

You must enclose the system name within double quotes.

(Required)

CFG{vcs_lltlinklowpri#}

{"system"}

Scalar

Defines a low priority heartbeat link. Typically, lltlinklowpri is used on a public network link to provide an additional layer of communication.

If you use different media speed for the private NICs, you can configure the NICs with lesser speed as low-priority links to enhance LLT performance. For example, lltlinklowpri1, lltlinklowpri2, and so on.

You must enclose the system name within double quotes.

(Optional)

CFG{lltoverudp}=1

Scalar

Indicates whether to configure heartbeat link using LLT over UDP.

(Required)

CFG{vcs_udplink<n>_address}

{<sys1>}

Scalar

Stores the IP address (IPv4 or IPv6) that the heartbeat link uses on node1.

You can have four heartbeat links and <n> for this response file variable can take values 1 to 4 for the respective heartbeat links.

(Required)

CFG

{vcs_udplinklowpri<n>_address}

{<sys1>}

Scalar

Stores the IP address (IPv4 or IPv6) that the low priority heartbeat link uses on node1.

You can have four low priority heartbeat links and <n> for this response file variable can take values 1 to 4 for the respective low priority heartbeat links.

(Required)

CFG{vcs_udplink<n>_port}

{<sys1>}

Scalar

Stores the UDP port (16-bit integer value) that the heartbeat link uses on node1.

You can have four heartbeat links and <n> for this response file variable can take values 1 to 4 for the respective heartbeat links.

(Required)

CFG{vcs_udplinklowpri<n>_port}

{<sys1>}

Scalar

Stores the UDP port (16-bit integer value) that the low priority heartbeat link uses on node1.

You can have four low priority heartbeat links and <n> for this response file variable can take values 1 to 4 for the respective low priority heartbeat links.

(Required)

CFG{vcs_udplink<n>_netmask}

{<sys1>}

Scalar

Stores the netmask (prefix for IPv6) that the heartbeat link uses on node1.

You can have four heartbeat links and <n> for this response file variable can take values 1 to 4 for the respective heartbeat links.

(Required)

CFG{vcs_udplinklowpri<n>_netmask}

{<sys1>}

Scalar

Stores the netmask (prefix for IPv6) that the low priority heartbeat link uses on node1.

You can have four low priority heartbeat links and <n> for this response file variable can take values 1 to 4 for the respective low priority heartbeat links.

(Required)

CFG{vcs_csgnic}

{system}

Scalar

Defines the NIC device to use on a system. You can enter 'all' as a system value if the same NIC is used on all systems.

(Optional)

CFG{vcs_csgvip}

Scalar

Defines the virtual IP address for the cluster.

(Optional)

CFG{vcs_csgnetmask}

Scalar

Defines the Netmask of the virtual IP address for the cluster.

(Optional)

CFG{vcs_eat_security}

Scalar

Specifies if the cluster is in secure enabled mode or not.

CFG{opt}{securityonenode}

Scalar

Specifies that the securityonenode option is being used.

CFG{securityonenode_menu}

Scalar

CFG{secusrgrps}

List

Defines the user groups which get read access to the cluster.

List or scalar: list

Optional or required: optional

CFG{rootsecusrgrps}

Scalar

Defines the read access to the cluster only for root and other users or user groups which are granted explicit privileges in VCS objects.

(Optional)

CFG{security_conf_dir}

Scalar

Specifies the directory where the configuration files are placed.

CFG{opt}{security}

Scalar

Specifies that the security option is being used.

CFG{defaultaccess}

Scalar

Defines if the user chooses to grant read access to everyone.

Optional or required: optional

CFG{vcs_eat_security_fips}

Scalar

Specifies that the enabled security is FIPS compliant.

CFG{vcs_userenpw}

List

List of encoded passwords for VCS users

The value in the list can be "Administrators Operators Guests"

(Optional)

CFG{vcs_username}

List

List of names of VCS users

(Optional)

CFG{vcs_userpriv}

List

List of privileges for VCS users

(Optional)

CFG{vcs_smtpserver}

Scalar

Defines the domain-based hostname (example: smtp.example.com) of the SMTP server to be used for web notification.

(Optional)

CFG{vcs_smtprecp}

List

List of full email addresses (example: user@example.com) of SMTP recipients.

(Optional)

CFG{vcs_smtprsev}

List

Defines the minimum severity level of messages (Information, Warning, Error, SevereError) that listed SMTP recipients are to receive. Note that the ordering of severity levels must match that of the addresses of SMTP recipients.

(Optional)

CFG{vcs_snmpport}

Scalar

Defines the SNMP trap daemon port (default=162).

(Optional)

CFG{vcs_snmpcons}

List

List of SNMP console system names

(Optional)

CFG{vcs_snmpcsev}

List

Defines the minimum severity level of messages (Information, Warning, Error, SevereError) that listed SNMP consoles are to receive. Note that the ordering of severity levels must match that of the SNMP console system names.

(Optional)

CFG{vcs_gconic}

{system}

Scalar

Defines the NIC for the Virtual IP that the Global Cluster Option uses. You can enter 'all' as a system value if the same NIC is used on all systems.

(Optional)

CFG{vcs_gcovip}

Scalar

Defines the virtual IP address to that the Global Cluster Option uses.

(Optional)

CFG{vcs_gconetmask}

Scalar

Defines the Netmask of the virtual IP address that the Global Cluster Option uses.

(Optional)