Storage Foundation for Oracle® RAC 7.4.1 Configuration and Upgrade Guide - Solaris

To verify the VCS configuration for PrivNIC and MultiPrivNIC

1. View the main.cf file located in the directory /etc/VRTSvcs/conf/config:

   # more /etc/VRTSvcs/conf/config/main.cf

2. For a configuration using the PrivNIC agent:

   • Verify that the PrivNIC resource displays in the file.

     For example:

     PrivNIC ora_priv (
                        Critical = 0
     																			Device @sys1 = {net1= 0, net2= 1}
     																			Device @sys2 = {net1= 0, net2= 1}
                        Address @sys1 = "192.168.12.1"
                        Address @sys2 = "192.168.12.2"
                        NetMask = "255.255.255.0"
                        )

   • Verify that the PrivNIC resource is online on all nodes in the cluster:

     # hares -state priv_resname
     Resource Attribute System Value
     ora_priv State    sys1   ONLINE
     ora_priv State    sys2   ONLINE

3. For a configuration using the MultiPrivNIC agent:

   • Verify that the MultiPrivNIC resource displays in the file.

     For example:

     MultiPrivNIC multi_priv (
                  Critical = 0
                  Device @sys1 = {net1= 0, net2 = 1}
                  Device @sys2 = {net1= 0, net2 = 1}
                  Address @sys1 = {"192.168.12.1" =0, "192.168.2.1" =1}
                  Address @sys2 = {"192.168.12.2" =0, "192.168.2.2" =1}
                  NetMask = "255.255.255.0"
                  )

   • Verify that the MultiPrivNIC resource is online on all systems in the cluster:

     # hares -state multipriv_resname
     Resource      Attribute        System      Value
     multi_priv       State          sys1     ONLINE
     multi_priv       State          sys2     ONLINE

4. Make sure that the specified private IP addresses and devices are displayed when you run the following command:

   # ifconfig -a

5. From each system, verify that the private IP addresses are operational using the ping command.