Veritas NetBackup™ 5240 Appliance Product Description
- About the NetBackup 5240 Appliance
- NetBackup 5240 Appliance overview
- Features and components of the NetBackup 5240 Appliance
- NetBackup 5240 Appliance front panel disk drive configurations
- NetBackup 5240 Appliance front panel USB port
- NetBackup 5240 Appliance control panel
- NetBackup 5240 Appliance rear panel
- NetBackup 5240 Appliance I/O configuration options
- NetBackup 5240 Appliance total I/O on-board and PCIe ports
- Customizable I/O configurations by slot for existing NetBackup 5240 Appliance installations
- QLE2692 dual-port 16Gb Fibre Channel host bus adapter
- Intel X710-DA2 dual-port 10Gb Ethernet card
- Dual-port 10 Gb Ethernet card with SFP+ transceiver ports
- QLE8442 dual-port 10Gb Ethernet/iSCSI capable card with SFP+ modules
- QLE2562 dual-port 8Gb Fibre Channel host bus adapter with SFP+ modules
- Quad-port 1Gb Ethernet card with RJ45 connectors
- SAS tape-out adapter
- NetBackup 5240 Appliance Network Interface Port locations and speeds
- NetBackup 5240 Appliance I/O configuration options
- About the Veritas 2U12 49TB Storage Shelf
- NetBackup 5240 Appliance and Veritas 2U12 49TB Storage Shelf cables
- Appendix A. Technical specifications and compliance standards
- NetBackup 5240 Appliance and Veritas 2U12 49TB Storage Shelf technical specifications
- Environmental specifications
- Protocol standards
- Regulatory, compliance, and certification information
QLE2562 dual-port 8Gb Fibre Channel host bus adapter with SFP+ modules
The QLE2562 dual-port 8Gb Fibre Channel (FC) host bus adapter with SFP+ modules connects the appliance to clients or other devices for fiber transport data transfer.
Table: QLE2562 dual-port 8Gb Fibre Channel host bus adapter port specifications
Item | Description | |||
|---|---|---|---|---|
Bracket height | Full Height | |||
Power consumption (watts) | 6.2 watts (typical) | |||
Operating temperature | 0°C to 55°C (32°F to 131°F) | |||
Storage temperature | - 40°C to 70°C ( - 40°F to 158°F) | |||
Operating humidity | 5% RH to 93% RH (non-operating, non-condensing) and 5% RH to 93% RH (operating, non-condensing) | |||
System interface type | PCIe v3.0 | |||
Certifications | FCC B, UL, CE, VCCI, CISPR, KN, CNS | |||
External connections | Rate | OM1 | OM2 | OM3 |
2Gbps | 150m | 300m | 500m | |
4Gbps | 70m | 150m | 380m | |
8Gbps | 21m | 50m | 150m | |
The following table describes the Fibre Channel host bus adapter LED indicator status activity.
Table: QLE2562 dual-port 8Gb Fibre Channel host bus adapter LED indicator status activity
LED 1 | LED 2 | Activity |
|---|---|---|
Off | Off | Power off |
Green on | Yellow on | Power on (pre-firmware initialization) |
Green on | Yellow on | Power on (post-firmware initialization ) |
Green and yellow LEDs flash alternately | Firmware error | |
Off | Yellow, flashing on activity | 2Gbps link / input-output (I/O) activity |
Green, flashing on activity | Off | 4Gbps link / input-output (I/O) activity |
Green, flashing on activity | Off | 8Gbps link / input-output (I/O) activity |
To purchase a QLE2562 dual-port 8Gb Fibre Channel host bus adapter for your appliance, contact your Veritas sales representative, or your Veritas Partner representative.
QLE2562 dual-port 8Gb Fibre Channel host bus adapter with SFP+ modules | |
SKU Number | Description |
21265747 | 5X00 FIBRE CHANNEL HBA 8GB DUAL PORT CRU CORPORATE (SFP modules included) |