Veritas NetBackup™ 5240 Appliance Product Description

Last Published:
Product(s): Appliances (Version Not Specified)
Platform: Veritas 5240
  1. About the NetBackup 5240 Appliance
    1.  
      NetBackup 5240 Appliance overview
    2.  
      Features and components of the NetBackup 5240 Appliance
    3. NetBackup 5240 Appliance front panel disk drive configurations
      1.  
        NetBackup 5240 Appliance disk drive LEDs
    4.  
      NetBackup 5240 Appliance front panel USB port
    5. NetBackup 5240 Appliance control panel
      1.  
        System Status LED states
      2.  
        Power button LED states
    6. NetBackup 5240 Appliance rear panel
      1. NetBackup 5240 Appliance I/O configuration options
        1.  
          NetBackup 5240 Appliance total I/O on-board and PCIe ports
        2.  
          Customizable I/O configurations by slot for existing NetBackup 5240 Appliance installations
        3.  
          QLE2692 dual-port 16Gb Fibre Channel host bus adapter
        4.  
          Intel X710-DA2 dual-port 10Gb Ethernet card
        5.  
          Dual-port 10 Gb Ethernet card with SFP+ transceiver ports
        6.  
          QLE8442 dual-port 10Gb Ethernet/iSCSI capable card with SFP+ modules
        7.  
          QLE2562 dual-port 8Gb Fibre Channel host bus adapter with SFP+ modules
        8.  
          Quad-port 1Gb Ethernet card with RJ45 connectors
        9.  
          SAS tape-out adapter
      2.  
        NetBackup 5240 Appliance Network Interface Port locations and speeds
  2. About the Veritas 2U12 49TB Storage Shelf
    1. Veritas 2U12 49TB Storage Shelf overview
      1.  
        Usable appliance storage capacities
    2.  
      Veritas 2U12 49TB Storage Shelf front panel components
    3.  
      Veritas 2U12 49TB Storage Shelf control panel
    4. Veritas 2U12 49TB Storage Shelf rear components
      1. Veritas 2U12 49TB Storage Shelf I/O modules
        1.  
          I/O module Status LED location and conditions
        2.  
          I/O module SAS Activity LED location and conditions
      2. Veritas 2U12 49TB Storage Shelf Power Cooling Modules
        1.  
          Power Cooling Module LEDs
    5.  
      NetBackup 5240 Appliance and Veritas 2U12 49TB Storage Shelf connections
  3. NetBackup 5240 Appliance and Veritas 2U12 49TB Storage Shelf cables
    1.  
      Power cables
    2.  
      Network cable
    3.  
      Multi-Mode fiber optic cable
    4.  
      Twinaxial copper cables
    5.  
      SAS-3 cable
  4. Appendix A. Technical specifications and compliance standards
    1.  
      NetBackup 5240 Appliance and Veritas 2U12 49TB Storage Shelf technical specifications
    2.  
      Environmental specifications
    3.  
      Protocol standards
    4. Regulatory, compliance, and certification information
      1.  
        Product regulatory compliance
      2.  
        Product safety compliance
      3.  
        Product EMC Compliance - Class A Compliance
      4.  
        Product ecology compliance
      5.  
        Certifications / Registrations / Declarations
      6. Electromagnetic compatibility notices
        1.  
          FCC Verification Statement (USA)
        2.  
          ICES-003 (Canada)
        3.  
          CE Declaration of Conformity (Europe)
        4.  
          BSMI (Taiwan)

System Status LED states

The System Status LED is a bi-color (Green/Amber) indicator that shows the current health of the system. The appliance provides two locations for this feature. The first location is on the Front Control Panel, while the second location is on the back edge of the server board.

Figure: System Status LED control panel location

System Status LED control panel locationNetBackup 5240 Appliancecontrol panelsystem status LED locationsystem statusNetBackup 5240 ApplianceLED descriptionsLED descriptionsNetBackup 5240 Appliancesystem statussystem status LED locationNetBackup 5240 Appliancecontrol panel

The following table provides a description of each LED state.

Table: System Status LED states

Color

State

Criticality

Description

No color

Off - The system is not operating

Not ready

  • System is power off (AC and/or DC)

  • System is in EuP Lot6 Off Mode

  • System is in S5 Soft-Off State

  • System is in S4 Hibernate Sleep State

Green

Solid on (SO)

Healthy

Indicates that the system is running (in S0 State) and its status is "Healthy". The system is not exhibiting any errors. AC power is present and BMC has booted and manageability functionality is up and running.

Green

~1 Hz blink

Degraded

The system is operating in a degraded state although still functional.

or

The system is operating in a redundant state but with an impending failure warning.

System degraded:

  • Redundant loss, such as power supply or fan. Applies only if the associated platform sub-system has redundancy capabilities.

  • Fan warning or failure when the number of fully operational fans is more than minimum number needed to cool the system.

  • Non-critical threshold crossed: Temperature (including HSBP temp), voltage, input power to power supply, output current for main power rail from power supply and Processor Thermal Control (Therm Ctrl) sensors.

  • Power supply predictive failure occurred while redundant power supply configuration was present.

  • Unable to use all of the installed memory (one or more DIMMs failed/disabled but functional memory remains available).

  • Battery failure.

  • BMC executing in uBoot. (Indicated by Chassis ID blinking at 3Hz). System in degraded state (no manageability). BMC uBoot is running but has not transferred control to the BMC Linux. Server will be in this state 6-8 seconds after BMC reset while it pulls the Linux image into flash.

Green

~1 Hz blink

Degraded (continued)

System degraded (continued):

  • BMC booting Linux. (Indicated by Chassis ID solid ON). System in degraded state (no manageability). Control has been passed from BMC uBoot to BMC Linux itself. It will be in this state for 10-20 seconds.

  • BMC Watchdog has reset the BMC.

  • Power unit sensor offset for configuration error is asserted.

  • Hard disk drive HSC is off-line or degraded.

Amber

~1 Hz blink

Non-critical

The system is operating in a degraded state with an impending failure warning. However, the system is still functioning.

Non-fatal - However, the system is likely to fail:

  • Critical threshold crossed - Voltage, temperature (including HSBP temp), input power to power supply, output current for main power rail from power supply and PROCHOT (Therm Ctrl) sensors.

  • VRD Hot asserted

  • Minimum number of fans to cool the system not present or failed

  • Hard drive fault

  • Power Unit Redundancy sensor - Insufficient resources offset (indicates not enough power supplies present)

  • Correctable memory error threshold has been reached for a failing DIMM when the system is operating in a non-redundant mode.

Amber

Solid on

Critical, non-recoverable - System is halted

Fatal alarm - system has failed or shutdown:

  • CPU CATERR signal asserted

  • MSID mismatch detected (CATERR also asserts for this case)

  • CPU1 is missing

  • CPU Thermal Trip

  • No power - power fault

  • DIMM failure when there is only one DIMM present; no other good DIMM memory present

Amber

Solid on

Critical, non-recoverable - System is halted

  • Uncorrectable Runtime memory error in non-redundant mode

  • DIMM Thermal Trip or equivalent

  • CPU ERR2 signal is asserted

  • BMC/Video memory test failed (Chassis ID shows blue/solid-on for this condition)

  • Both uBoot BMC FW images are bad (Chassis ID shows blue/solid-on for this condition)

  • Fatal Error in processor initialization:

    • Processor family not identical

    • Processor model not identical

    • Processor core/thread counts not identical

    • Processor cache size not identical

    • Unable to synchronize processor frequency

  • Unable to synchronize QPI link frequency