Veritas 5340 Appliance Product Description
- About the Veritas 5340 Appliance
- Compute node disk drive configurations
- About the compute node control panel
- About the compute node rear panel
- About the Veritas 5U84 Storage Shelves
- About Veritas 5340 Appliance storage shelves
- About the 5U84 Primary Storage Shelf and 5U84 Expansion Storage Shelf rear components
- Veritas 5340 Appliance and 5U84 Storage Shelf cables
- Appendix A. Technical specifications, Environmental/Protocol standards, and Compliance standards
- Regulatory, compliance, and certification information
Total 5340 Appliance on-board and PCIe-based I/O ports
The following table shows the total number of I/O ports that are available with each 5340 Appliance I/O configuration.
Table: Total number of 5340 Appliance on-board and PCIe-based I/O ports for each available I/O configuration
I/O Configuration option | 16Gb Fibre Channel PCIe ports (optical) | 10Gb Ethernet/iSCSI PCIe ports (optical) | 8Gb Fibre Channel PCIe ports (optical) | 1Gb Ethernet ports (copper) |
---|---|---|---|---|
A † | 4 | 10 | 0 | 4 (on-board) |
B †† | 4 | 8 | 2 | 4 (on-board) |
C †† | 4 | 6 | 4 | 4 (on-board) |
D †† | 4 | 4 | 6 | 4 (on-board) |
E †† | 4 | 2 | 8 | 4 (on-board) |
F ††† | 6 | 8 | 0 | 4 (on-board) |
G †††† | 8 | 6 | 0 | 4 (on-board) |
H†††† | 10 | 4 | 0 | 4 (on-board) |
J††† | 12 | 2 | 0 | 4 (on-board) |
†Available with both NetBackup Appliance software release 3.1 and later, and Flex Appliance software release 1.0 and later. NOTE: The 16Gb Fibre Channel HBA ports in slots 1 and 4 are used to connect the Veritas &aModel; Appliance compute node to the Veritas 5U84 Primary Storage Shelf. †† Available only with NetBackup Appliance software release 3.1 and later. ††† Available only with NetBackup Appliance software release 3.1.1 and later. †††† Available with both NetBackup Appliance software release 3.1.1 and later, and Flex Appliance software release 2.0 and later. Cable connection types:
|