Veritas 5340 Appliance Product Description
- About the Veritas 5340 Appliance
- Compute node disk drive configurations
- About the compute node control panel
- About the compute node rear panel
- About the Veritas 5U84 Storage Shelves
- About Veritas 5340 Appliance storage shelves
- About the 5U84 Primary Storage Shelf and 5U84 Expansion Storage Shelf rear components
- Veritas 5340 Appliance and 5U84 Storage Shelf cables
- Appendix A. Technical specifications, Environmental/Protocol standards, and Compliance standards
- Regulatory, compliance, and certification information
Drawer Sideplane Status panels
Drawer Sideplane Status panels are located on the front of the 5U84 storage shelves. These panels provide status and the activity information about the Sideplane card.
Table: Drawer Sideplane Status panel descriptions
Number | Item |
---|---|
1 | Sideplane card OK / Power good |
2 | Sideplane card Fault |
3 | Logical Fault |
4 | Cable Fault |
5 | Activity Bar Graph |
The following table describes the Drawer Sideplane LED statuses.
Table: Drawer Sideplane LED statuses
Status | Power (Green) | Drawer Fault (Amber) | Cable Fault (Amber) | Logical Fault (Amber) | Activity Bar Graph (Green) |
---|---|---|---|---|---|
Drawer Sideplane card OK / Power Good | On | Off | Off | Off | X |
Drawer Sideplane card Fault | Off | On | X | X | Off |
Drive failure has occurred causing loss of availability or redundancy | On | On | X | X | X |
Array in impacted state (SES) Indicated | On | X | X | Flashing | X |
Cable Fault | Off | X | On | X | Off |
Drive Activity | On | Off | Off | Off | On * |
X = Disregard * The Activity Bar Graph is a six-segment indicator that shows activity of the SAS disk drive interface to the Sideplane. If none of the segments are lit, then there is no SAS disk drive activity occurring. Increasing disk drive activity is measured upward, starting with the bottom segment. When full disk drive activity occurs, all six segments are lit. |