Veritas 5340 Appliance Product Description

Last Published:
Product(s): Appliances (Version Not Specified)
Platform: Veritas 5340
  1. About the Veritas 5340 Appliance
    1.  
      About the Veritas 5340 Appliance
    2.  
      Features and components of the appliance
    3.  
      Locating the appliance serial number
    4. Compute node disk drive configurations
      1.  
        About the compute node disk drive LEDs
    5.  
      About the compute node front panel USB port
    6. About the compute node control panel
      1.  
        About the System Status LED states
      2.  
        About the Power button LED states
    7. About the compute node rear panel
      1.  
        Available NetBackup 5340 Appliance PCIe-based I/O configurations
      2. Total 5340 Appliance on-board and PCIe-based I/O ports
        1.  
          QLE2692 dual-port 16Gb Fibre Channel host bus adapter
        2.  
          QLE8442 dual-port 10Gb Ethernet/iSCSI capable card with SFP+ modules
        3.  
          QLE2562 dual-port 8Gb Fibre Channel host bus adapter with SFP+ modules
      3.  
        Appliance network interface card port assignments
  2. About the Veritas 5U84 Storage Shelves
    1. About Veritas 5340 Appliance storage shelves
      1.  
        Available appliance storage options
      2. About the Veritas 5U84 Storage Shelf disk drive drawers
        1.  
          Disk drive slot numbering
        2.  
          Disk Drive In Carrier (DDIC) modules
        3.  
          Disk Drive Drawer printed circuit board (PCB) assemblies
        4.  
          Drawer Sideplane Status panels
        5.  
          Drawer Sideplane hot swap LED indicators
      3.  
        5U84 Primary Storage Shelf and the 5U84 Expansion Storage Shelf control panel
    2. About the 5U84 Primary Storage Shelf and 5U84 Expansion Storage Shelf rear components
      1.  
        Veritas 5U84 Primary Storage Shelf RAID controllers
      2. Veritas 5U84 Expansion Storage Shelf Expansion I/O modules
        1.  
          Expansion I/O module Status LED location and conditions
        2.  
          Expansion I/O module SAS Activity LED location and conditions
      3.  
        Veritas 5U84 Storage Shelf cooling modules
      4.  
        5U84 Storage Shelf Power Supply Units
  3. Veritas 5340 Appliance and 5U84 Storage Shelf cables
    1.  
      Power cables
    2.  
      Network cable
    3.  
      Multi-mode fiber optic cable
    4.  
      SAS-3 cable
    5.  
      Twinaxial copper cables
  4. Appendix A. Technical specifications, Environmental/Protocol standards, and Compliance standards
    1.  
      5340 Appliance compute node technical specifications
    2.  
      Veritas 5U84 Storage Shelf technical specifications
    3.  
      Environmental specifications
    4.  
      Protocol standards
    5. Regulatory, compliance, and certification information
      1.  
        Product regulatory compliance
      2.  
        Product safety compliance
      3.  
        Product EMC Compliance - Class A Compliance
      4.  
        Product ecology compliance
      5.  
        Certifications / Registrations / Declarations
      6. Electromagnetic compatibility notices
        1.  
          FCC Verification Statement (USA)
        2.  
          ICES-003 (Canada)
        3.  
          CE Declaration of Conformity (Europe)
        4.  
          VCCI (Japan)
        5.  
          BSMI (Taiwan)
  5.  
    Index

Expansion I/O module SAS Activity LED location and conditions

This section discusses the location of the SAS Activity LEDs on the Expansion I/O modules and the SAS Activity LED conditions.

Figure: Expansion I/O module SAS Activity LED location

Expansion I/O module SAS Activity LED location

Table: Expansion I/O module SAS Activity LED conditions

Condition

Activity LED (green)

Fault LED (amber)

No Cable Present

Off

Off

Cable Present

All links up, no activity.

On

Off

Cable Present

All links up.

Flash with aggregate port activity

Off

Critical Fault

  • Any fault which causes operation of the cable to cease or fail to start

    For example, an OVERCURRENT trip.

  • No connection detected at the opposite end of the SAS cable

Off

On

Non-Critical Fault

Any fault which does not cause the connection to cease operation.

For example, not all links established; OVERTEMPERATURE condition detected.

Flash with aggregate port activity

Flashing - One second on; one second off