Veritas Access Administrator's Guide
- Section I. Introducing Veritas Access
- Section II. Configuring Veritas Access
- Adding users or roles
- Configuring the network
- About configuring the Veritas Access network
- About bonding Ethernet interfaces
- Bonding Ethernet interfaces
- Configuring DNS settings
- About Ethernet interfaces
- Displaying current Ethernet interfaces and states
- Configuring IP addresses
- Configuring Veritas Access to use jumbo frames
- Configuring VLAN interfaces
- Configuring NIC devices
- Swapping network interfaces
- Excluding PCI IDs from the cluster
- About configuring routing tables
- Configuring routing tables
- Changing the firewall settings
- IP load balancing
- Configuring Veritas Access in IPv4 and IPv6 mixed mode
- Configuring authentication services
- Section III. Managing Veritas Access storage
- Configuring storage
- About storage provisioning and management
- About configuring disks
- About configuring storage pools
- Configuring storage pools
- About quotas for usage
- Enabling, disabling, and displaying the status of file system quotas
- Setting and displaying file system quotas
- Setting user quotas for users of specified groups
- About quotas for CIFS home directories
- About Flexible Storage Sharing
- Limitations of Flexible Storage Sharing
- Configuring erasure coding for a Flexible Storage Sharing file system
- Workflow for configuring and managing storage using the Veritas Access CLI
- Displaying information for all disk devices associated with the nodes in a cluster
- Displaying WWN information
- Importing new LUNs forcefully for new or existing pools
- Initiating host discovery of LUNs
- Increasing the storage capacity of a LUN
- Formatting or reinitializing a disk
- Removing a disk
- Configuring data integrity with I/O fencing
- Configuring ISCSI
- Veritas Access as an iSCSI target
- Configuring storage
- Section IV. Managing Veritas Access file access services
- Configuring the NFS server
- About using the NFS server with Veritas Access
- Using the kernel-based NFS server
- Using the NFS-Ganesha server
- Switching between NFS servers
- Recommended tuning for NFS-Ganesha version 3 and version 4
- Accessing the NFS server
- Displaying and resetting NFS statistics
- Configuring Veritas Access for ID mapping for NFS version 4
- Configuring the NFS client for ID mapping for NFS version 4
- About authenticating NFS clients
- Setting up Kerberos authentication for NFS clients
- Using Veritas Access as a CIFS server
- About configuring Veritas Access for CIFS
- About configuring CIFS for standalone mode
- Configuring CIFS server status for standalone mode
- Changing security settings
- About Active Directory (AD)
- About configuring CIFS for Active Directory (AD) domain mode
- Setting NTLM
- About setting trusted domains
- Specifying trusted domains that are allowed access to the CIFS server
- Allowing trusted domains access to CIFS when setting an IDMAP backend to rid
- Allowing trusted domains access to CIFS when setting an IDMAP backend to ldap
- Allowing trusted domains access to CIFS when setting an IDMAP backend to hash
- Allowing trusted domains access to CIFS when setting an IDMAP backend to ad
- About configuring Windows Active Directory as an IDMAP backend for CIFS
- Configuring the Active Directory schema with CIFS-schema extensions
- Configuring the LDAP client for authentication using the CLI
- Configuring the CIFS server with the LDAP backend
- Setting Active Directory trusted domains
- About storing account information
- Storing user and group accounts
- Reconfiguring the CIFS service
- About mapping user names for CIFS/NFS sharing
- About the mapuser commands
- Adding, removing, or displaying the mapping between CIFS and NFS users
- Automatically mapping UNIX users from LDAP to Windows users
- About managing home directories
- About CIFS clustering modes
- About migrating CIFS shares and home directories
- Setting the CIFS aio_fork option
- About managing local users and groups
- Enabling CIFS data migration
- Configuring an FTP server
- About FTP
- Creating the FTP home directory
- Using the FTP server commands
- About FTP server options
- Customizing the FTP server options
- Administering the FTP sessions
- Uploading the FTP logs
- Administering the FTP local user accounts
- About the settings for the FTP local user accounts
- Configuring settings for the FTP local user accounts
- File sharing for a scale-out file system using FTP
- Using Veritas Access as an Object Store server
- Configuring the NFS server
- Section V. Monitoring and troubleshooting
- Section VI. Provisioning and managing Veritas Access file systems
- Creating and maintaining file systems
- About creating and maintaining file systems
- About scale-out file systems
- Read performance tunables for a cloud tier in a scale-out file system
- About encryption at rest
- Considerations for creating a file system
- Best practices for creating file systems
- Choosing a file system layout type
- Determining the initial extent size for a file system
- About striping file systems
- About creating a tuned file system for a specific workload
- About FastResync
- About fsck operation
- Setting retention in files
- Setting WORM over NFS
- Manually setting WORM-retention on a file over CIFS
- About managing application I/O workloads using maximum IOPS settings
- Creating a file system
- Bringing the file system online or offline
- Listing all file systems and associated information
- Modifying a file system
- Managing a file system
- Destroying a file system
- Upgrading disk layout versions
- Creating and maintaining file systems
- Section VII. Configuring cloud storage
- Section VIII. Provisioning and managing Veritas Access shares
- Creating shares for applications
- Creating and maintaining NFS shares
- About NFS file sharing
- Displaying file systems and snapshots that can be exported
- Exporting an NFS share
- Displaying exported directories
- About managing NFS shares using netgroups
- Unexporting a directory or deleting NFS options
- Exporting an NFS share for Kerberos authentication
- Mounting an NFS share with Kerberos security from the NFS client
- Exporting an NFS snapshot
- Creating and maintaining CIFS shares
- About managing CIFS shares
- Exporting a directory as a CIFS share
- Configuring a CIFS share as secondary storage for an Enterprise Vault store
- Exporting the same file system/directory as a different CIFS share
- About the CIFS export options
- Setting share properties
- Displaying CIFS share properties
- Hiding system files when adding a CIFS normal share
- Allowing specified users and groups access to the CIFS share
- Denying specified users and groups access to the CIFS share
- Exporting a CIFS snapshot
- Deleting a CIFS share
- Modifying a CIFS share
- Making a CIFS share shadow copy aware
- Creating CIFS shares for a scale-out file system
- Using Veritas Access with OpenStack
- Integrating Veritas Access with Data Insight
- Section IX. Managing Veritas Access storage services
- Compressing files
- About compressing files
- Use cases for compressing files
- Best practices for using compression
- Compression tasks
- Compressing files
- Showing the scheduled compression job
- Scheduling compression jobs
- Listing compressed files
- Uncompressing files
- Modifying the scheduled compression
- Removing the specified schedule
- Stopping the schedule for a file system
- Removing the pattern-related rule for a file system
- Removing the modified age related rule for a file system
- Configuring SmartTier
- About Veritas Access SmartTier
- How Veritas Access uses SmartTier
- Configuring the policy of each tiered file system
- Adding tiers to a file system
- Adding or removing a column from a secondary tier of a file system
- Configuring a mirror to a tier of a file system
- Listing all of the files on the specified tier
- Displaying a list of SmartTier file systems
- About tiering policies
- About configuring the policy of each tiered file system
- Best practices for setting relocation policies
- Relocating a file or directory of a tiered file system
- Displaying the tier location of a specified file
- About configuring schedules for all tiered file systems
- Configuring schedules for tiered file systems
- Displaying the files that may be moved or pruned by running a policy
- Allowing metadata information on the file system to be written on the secondary tier
- Restricting metadata information to the primary tier only
- Removing a tier from a file system
- Configuring SmartIO
- About SmartIO for solid-state drives
- About configuring SmartIO
- About SmartIO read caching for applications running on Veritas Access file systems
- Setting up SmartIO read caching for Veritas Access
- Verifying the VxFS cache area and monitoring the caching
- Setting the caching mode
- Customizing the caching behavior
- Viewing the caching statistics for a cache area
- Configuring episodic replication
- About Veritas Access episodic replication
- How Veritas Access episodic replication works
- Starting Veritas Access episodic replication
- Setting up communication between the source and the destination clusters
- Setting up the file systems to replicate
- Setting up files to exclude from an episodic replication unit
- Scheduling the episodic replication
- Defining what to replicate
- About the maximum number of parallel episodic replication jobs
- Managing an episodic replication job
- Replicating compressed data
- Displaying episodic replication job information and status
- Synchronizing an episodic replication job
- Behavior of the file systems on the episodic replication destination target
- Accessing file systems configured as episodic replication destinations
- Episodic replication job failover and failback
- Configuring continuous replication
- About Veritas Access continuous replication
- How Veritas Access continuous replication works
- Starting Veritas Access continuous replication
- Setting up communication between the source and the destination clusters
- Setting up the file system to replicate
- Managing continuous replication
- Displaying continuous replication information and status
- Unconfiguring continuous replication
- Continuous replication failover and failback
- Using snapshots
- Using instant rollbacks
- About instant rollbacks
- Creating a space-optimized rollback
- Creating a full-sized rollback
- Listing Veritas Access instant rollbacks
- Restoring a file system from an instant rollback
- Refreshing an instant rollback from a file system
- Bringing an instant rollback online
- Taking an instant rollback offline
- Destroying an instant rollback
- Creating a shared cache object for Veritas Access instant rollbacks
- Listing cache objects
- Destroying a cache object of a Veritas Access instant rollback
- Compressing files
- Section X. Reference
- Index
Modifying tunables for iSCSI
You can set the values of the attributes on the targets. You can set or show the default values, the values for all targets, or the values for a specific target.
Table: Attributes for iSCSI targets shows the target attributes that you can modify.
Table: Attributes for iSCSI targets
Attribute | Description |
|---|---|
cmds_max | The maximum number of SCSI commands that the session will queue. A session is defined as a connection between the initiator and target portal for accessing a given target. cmds_max defines the commands per target, which could be multiple LUNs. Valid values range from 2 to 2048 and should be a power of 2. |
fast_abort | Defines whether initiator should respond to R2Ts (Request to Transfer) after sending a task management function like an ABORT_TASK or LOGICAL UNIT RESET. A value of Yes causes the initiator to stop responding to R2Ts after an ABORT_TASK request is received. For Equallogic arrays, the recommended value is No. Valid values are Yes or No. |
initial_login_retry_max | The maximum number of times that the iSCSI initiator should try a login to the target during first login. This only affects the initial login. Valid values range from 1 to 16. During each login attempt, wait for login_timeout seconds for the login to succeed. |
login_timeout | The amount of time that the iSCSI initiator service should wait for login to complete. The value of this attribute is in seconds. Valid values range from 10 to 600. |
logout_timeout | The amount of time that the iSCSI initiator service should wait for logout to complete. The value of this attribute is in seconds. Valid values range from 10 to 600. |
noop_interval | The time to wait between subsequent sending of Nop-out requests. The value of this attribute is in seconds. Valid values range from 5 to 600. |
noop_timeout | The amount of time that the iSCSI initiator service should wait for response to a Nop-out request sent to the target, before failing the connection. Failing the connection causes the I/O to be failed and retried on any other available path. The value of this attribute is in seconds. Valid values range from 5 to 600. |
queue_depth | The maximum number of SCSI commands queued per LUN, belonging to a target. The value for queue_depth cannot be greater than cmds_max. Valid values range from 1 to 128. |
replacement_timeout | The amount of time to wait for session re-establishment before failing SCSI commands. The value of this attribute is in seconds. Valid values range from 10 to 86400. |
To display the default value for target attributes
- To display the default value for target attributes, enter the following:
Storage> iscsi target attr showdefault
To display values for target attributes of all known targets
- To display values for target attributes of all known targets, enter the following:
Storage> iscsi target attr showall
To display the attribute values for a specific target
- To display the attribute values for a specific target, enter the following:
Storage> iscsi target attr show target-name
where target-name is the name of the iSCSI target to be displayed.
To set the default value for a target attribute
- To set the default value for a target attribute, enter the following:
Storage> iscsi target attr setdefault attribute value
attribute
The attribute for which to set the value.
value
The default value to be set for the attribute.
The default value is inherited by any new targets that get added.
To set an attribute value for all known targets
- To set an attribute value for all known targets, enter the following:
Storage> iscsi target attr setall attribute value
attribute
The attribute for which to set the value.
value
The value to be set for the attribute.
This command does not change the default value as shown in the Storage> iscsi target attr showdefault command. Changes to values are effective after re-login.
To set the attribute value for a specific target
- To set the attribute value for a specific target, enter the following:
Storage> iscsi target attr set target-name attribute value
target-name
The name of the specific iSCSI target.
attribute
The attribute of the specific target.
value
The value to be set for the target attribute.