Veritas NetBackup™ Deduplication Guide
- Introducing the NetBackup media server deduplication option
- Planning your deployment
- About MSDP storage and connectivity requirements
- About NetBackup media server deduplication
- About NetBackup Client Direct deduplication
- About MSDP remote office client deduplication
- About MSDP performance
- MSDP deployment best practices
- Provisioning the storage
- Licensing deduplication
- Configuring deduplication
- Configuring the Deduplication Multi-Threaded Agent behavior
- Configuring the MSDP fingerprint cache behavior
- Configuring MSDP fingerprint cache seeding on the storage server
- About MSDP Encryption using KMS service
- Configuring a storage server for a Media Server Deduplication Pool
- Configuring a disk pool for deduplication
- Configuring a Media Server Deduplication Pool storage unit
- About MSDP optimized duplication within the same domain
- Configuring MSDP optimized duplication within the same NetBackup domain
- Configuring MSDP replication to a different NetBackup domain
- About NetBackup Auto Image Replication
- Configuring a target for MSDP replication to a remote domain
- Creating a storage lifecycle policy
- Resilient Network properties
- Editing the MSDP pd.conf file
- About protecting the MSDP catalog
- Configuring an MSDP catalog backup
- Configuring deduplication to the cloud with NetBackup CloudCatalyst
- Using NetBackup CloudCatalyst to upload deduplicated data to the cloud
- Configuring a CloudCatalyst storage server for deduplication to the cloud
- Monitoring deduplication activity
- Viewing MSDP job details
- Managing deduplication
- Managing MSDP servers
- Managing NetBackup Deduplication Engine credentials
- Managing Media Server Deduplication Pools
- Changing a Media Server Deduplication Pool properties
- Configuring MSDP data integrity checking behavior
- About MSDP storage rebasing
- Managing MSDP servers
- Recovering MSDP
- Replacing MSDP hosts
- Uninstalling MSDP
- Deduplication architecture
- Troubleshooting
- About unified logging
- About legacy logging
- Troubleshooting MSDP installation issues
- Troubleshooting MSDP configuration issues
- Troubleshooting MSDP operational issues
- Troubleshooting CloudCatalyst issues
- CloudCatalyst logs
- Problems encountered while using the Cloud Storage Server Configuration Wizard
- Disk pool problems
- Problems during cloud storage server configuration
- CloudCatalyst troubleshooting tools
- Appendix A. Migrating to MSDP storage
Editing an MSDP storage server configuration file
To use a storage server configuration file for recovery, it must contain only the required information. You must remove any point - in - time status information. (Status information is only in a configuration file that was saved on an active storage server.) You also must add several configuration settings that are not included in a saved configuration file or a template configuration file.
Table: Required lines for a recovery file shows the configuration lines that are required.
Table: Required lines for a recovery file
Configuration setting | Description |
---|---|
V7.0 "storagepath" " " string | The value should be the same as the value that was used when you configured the storage server. |
V7.0 "spalogpath" " " string | For the spalogpath, use the storagepath value and append log to the path. For example, if the storagepath is |
V7.0 "dbpath" " " string | If the database path is the same as the storagepath value, enter the same value for dbpath. Otherwise, enter the path to the database. |
V7.0 "required_interface" " " string | A value for required_interface is required only if you configured one initially; if a specific interface is not required, leave it blank. In a saved configuration file, the required interface defaults to the computer's hostname. |
V7.0 "spalogretention" "7" int | Do not change this value. |
V7.0 "verboselevel" "3" int | Do not change this value. |
V7.0 "replication_target(s)" "none" string | A value for replication_target(s) is required only if you configured optimized duplication. Otherwise, do not edit this line. |
V7.0 "spalogin" "username" string | Replace username with the NetBackup Deduplication Engine user ID. |
V7.0 "spapasswd" "password" string | Replace password with the password for the NetBackup Deduplication Engine user ID. |
V7.0 "encryption" " " int | The value should be the same as the value that was used when you configured the storage server. |
V7.0 "kmsenabled" " " int | The value is used to enable or disable MSDP KMS configuration. The value should be the same as the value that was used when you configured the storage server. |
V7.0 "kmsservertype" " " int | The value is KMS server type. This value should be 0. |
V7.0 "kmsservername" " " string | The value is NBU Key Management Server. The value should be the same as the value that was used when you configured the storage server. |
V7.0 "keygroupname" " " string | The value should be the same as the value that was used when you configured the storage server. |
To edit the storage server configuration
- If you did not save a storage server configuration file, get a storage server configuration file.
- Use a text editor to enter, change, or remove values.
Remove lines from and add lines to your file until only the required lines (see Table: Required lines for a recovery file) are in the configuration file. Enter or change the values between the second set of quotation marks in each line. A template configuration file has a space character (" ") between the second set of quotation marks.