Search <book_title>...

Veritas NetBackup™ OpsCenter Administrator's Guide

Last Published: 2021-06-07

Product(s): NetBackup (9.1)

Upgrading OpsCenter on Windows

Use the following procedure to upgrade OpsCenter components on a Windows host.

Review the following considerations before installing OpsCenter components on Windows:

If you plan to upgrade both the backup product like NetBackup and the OpsCenter components, it is recommended that you upgrade OpsCenter components first. By upgrading OpsCenter components before the backup product, OpsCenter can start collecting data from the backup product once it is added to the console.

You must perform upgrades in the following order:

Serial No.	Steps to upgrade	Reference
1.	Upgrade the OpsCenter Server	See “To upgrade OpsCenter Server on Windows”.
3.	Upgrade the OpsCenter View Builder	See “To upgrade OpsCenter View Builder on Windows”.
4.	Upgrade the backup product that you are using like NetBackup.	Refer to the appropriate product manuals.

The above order also holds true if you plan to upgrade only OpsCenter and not the backup product. Always upgrade the OpsCenter Server first followed by the View Builder.

It is recommended that you enable 8.3 file name creation before installing OpsCenter components. If 8.3 file name creation is disabled, enable it and restart the Windows host before installing or upgrading to OpsCenter components.
You must not run any other installation while installing OpsCenter components. Additionally after an installation is complete, you should wait for some time before installing other OpsCenter components.
It is recommended that you do not cancel or interrupt the installation process once it is started.
If you try to install OpsCenter components on a system where OpsCenter is already installed, the installer runs in a Maintenance mode. The Maintenance mode lets you repair or remove the OpsCenter component that is installed on your system.

To upgrade OpsCenter Server on Windows

If you plan to upgrade your backup product and OpsCenter, ensure that you upgrade OpsCenter first. When upgrading OpsCenter, always upgrade the OpsCenter Server first followed by the View Builder.
On a Windows host where you want to install OpsCenter Server, insert the appropriate OpsCenter product DVD in the DVD drive.
- If auto-run is enabled, the DVD Browser appears.
- If auto-run is not enabled, click Start > Run. On the Run dialog box, in the Open text box, type 'D:\Browser.exe' and press Enter:
  Where D is the DVD drive.
  The DVD Browser appears.
On the DVD Browser, click the Installation link.
Click the OpsCenter Server Installation link to install OpsCenter Server.
The Welcome panel of the Installation Wizard appears. The Installation Wizard detects an existing installation of OpsCenter Server on the system. Depending on the installed version, the following message may be displayed on the Welcome panel:
The installer has detected that OpsCenter Server current version is already installed on your system that will now be upgraded to new version.
Click Next to continue.
Read the license agreement, check I accept the terms of the license agreement.
You may opt to check or uncheck Participate in the NetBackup Product Improvement Program. This option is checked by default.
If this option is checked, OpsCenter will automatically upload installation deployment and product usage information to the OpsCenter development and support teams in a secured manner. This data would be used to guide future product development and also analyze issues. For more information, refer to the About the NetBackup Product Improvement Program section in the NetBackup Installation Guide.
Click Next.
On the Installation Choice panel, click Typical to use the default settings, installation location, or port numbers. Typical is selected by default.
Also compare the space that is required for installing OpsCenter Server and the actual space that is available.
Note:
The Custom option is disabled when you upgrade to OpsCenter. You cannot customize the default settings, locations, or port numbers while upgrading to OpsCenter.
Click Next.
Specify a location for saving the old OpsCenter database. The default location is C:\Program Files\Symantec\OpsCenter_SavedData.
Warning:
In case of sequential OpsCenter upgrades (for example, 8.0 > 8.1 > 8.1.1), the old OpsCenter_SavedData folder may already exist. If the OpsCenter_SavedData folder is overwritten during upgrade, the OpsCenter user interface may not start properly. To avoid this problem, you should rename the old OpsCenter_SavedData folder before upgrading to OpsCenter. You can save a copy of the old database in a folder named with the associated release version.
Click Browse to specify a different location.
In case the directory C:\Program Files\Symantec\OpsCenter_SavedData does not exist, you are prompted to create it. Click Yes to create the directory.
Note:
Ensure that the database location has adequate space by going through the Disk space requirements section on this page. A green checkmark appears in the Required column if there is adequate disk space.
Click Next.

On the Import Authentication Settings panel, select one of the following options:

Do not import users	Select this option if you do not want to import users from the earlier OpsCeOpsCenter versions into OpsCenter database. Only default OpsCenter user is created who can logon to OpsCenter and reset passwords for all other existing passwords.
Import users	Select this option if you want to import users from earlier OpsCenter versions into OpsCenter database.

For more details, refer to the About Importing Authentication Settings section.

See About importing authentication settings during OpsCenter upgrade.

If import of authentication settings and users from the older OpsCenter version fails, you need to reset passwords of all OpsCenter(vx) users using the default OpsCenter user credentials.

See Resetting an OpsCenter user password.

On the License Keys panel, enter your demo or permanent key that you have received with the purchase of OpsCenter and click Add Key.
See OpsCenter Analytics license keys.
The installer shows the summary of the installation settings. Check Save summary to option to save the installation summary. Click Browse to save the installation summary in your preferred location.
Click Install to begin the installation. The installer installs OpsCenter Server software and also migrates data to the OpsCenter database. The database migration may take some time based on the size of your database.
After successful installation, you can view the installation logs or view the Readme.
Click Finish.
The installation logs are generated in the following location:
%ALLUSERSPROFILE%\Symantec\OpsCenter\INSTALLLOGS\OpsCenterServerInstallLog.htm
Note:
If you run the installer in a maintenance mode later, OpsCenterServerMaintenanceInstallLog.htm is also generated in the same location.
In OpsCenter, the database upgrade logs are stored at the following location:
%ALLUSERSPROFILE%\Symantec\OpsCenter\INSTALLLOGS\pre-install-config\db\log
See About OpsCenter upgrade failure scenarios.
Note:
After successful upgrade, OpsCenter database password is set to an auto-generated string, if the earlier password is still the default one, that is 'SQL'. It is recommended that you change the database password after the installation.
See Changing the OpsCenter database administrator password.
If you had changed the default password in the earlier version, you do not need to change it again. The installer retains the old password that you can use in the current version.

To upgrade OpsCenter View Builder on Windows

If you plan to upgrade your backup product and OpsCenter, ensure that you upgrade OpsCenter first. When upgrading OpsCenter, always upgrade the OpsCenter Server first followed by the View Builder.
On a Windows host where you want to install OpsCenter View Builder, insert the OpsCenter product DVD in the DVD drive.
- If auto-run is enabled, the DVD Browser appears.
- If autorun is not enabled, click Start > Run. On the Run dialog box, in the Open text box, type D:\Browser.exe and press Enter:
  Where D is the DVD drive.
  The DVD Browser appears.
On the DVD Browser, click the Installation link.
Click the OpsCenter View Builder Installation link to install OpsCenter View Builder.
The Welcome panel of the Installation Wizard appears. The Installation Wizard detects an existing installation of OpsCenter View Builder on the system. Depending on the installed version, the following message is displayed on the Welcome panel:
The installer has detected that OpsCenter View Builder old_version is already installed on your system that will now be upgraded to new_version.
Click Next to continue.
Read the license agreement, check I accept the terms of the license agreement.
You may opt to check or uncheck Participate in the NetBackup Product Improvement Program. This option is checked by default.
If this option is checked, OpsCenter will automatically upload installation deployment and product usage information to the OpsCenter development and support teams in a secured manner. This data would be used to guide future product development and also analyze issues. For more information, refer to the About the NetBackup Product Improvement Program section in the NetBackup Installation Guide.
Click Next.
The installer shows the summary of the installation settings. Check Save summary to option to save the installation summary. Click Browse to save the installation summary in your preferred location.
Click Install to begin the installation. The installer installs OpsCenter View Builder software.
After successful installation, you can view the installation logs or view the Readme.
Click Finish.
The installation logs are generated in the following location:
%ALLUSERSPROFILE%\Symantec\OpsCenter\INSTALLLOGS\OpsCenterViewBuilderInstallLog.htm
Note:
If you run the installer in a maintenance mode later, OpsCenterViewBuilderMaintenanceInstallLog.htm is also generated in the same location.